Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Malaysia: 1800 88 3496
International+65 6415 5353

Low cost, 3-1/2 Digit Voltmeters, 1/8 DIN

DP301AN

Low cost, DC Voltmeter | DP301AN

Low cost, DC Voltmeter

See All Models Below

  • ±1999 Count Display Span
  • ±200 mV to ±200 Vdc Ranges
  • True-Differential Input with 80 dB CMR
  • 3-Wire Ratio Input
  • Bright, 14 mm (0.56") LED Display
  • Automatic Zero and Polarity
  • Display Hold and Test
  • 115/230 Vac Power
  • 1/8 DIN Case

    Options
  • Isolated 9 to 32 Vdc Power
  • Isolated 26 to 56 Vdc Power
  • Screw-Terminal Barrier Strip
  • NEMA 4 (IP65) Splash-Proof Lens Cover
Process Measurement and Control Instruments - View related products

Description

The DP301AN is a low-cost 3-1/2 digit DC voltmeter. It fits in a standard 1/8 DIN panel cutout and require a depth of less than 104 mm (4.1") behind the panel. With the addition of a screw-terminal barrier strip, it becomes a low-cost, pin-compatible alternative to the DP2000A and DP2000B in applications where indication-only is required.

INPUT RANGES
The DP301AN offer voltage ranges of ±0.1999V, ±1.999V, ±19.99V and ±199.9 Vdc. The input is true-differential, with excellent common-mode noise rejection (CMR). By using an external DC voltage reference, any of these ranges can further be configured for 3-wire ratio measurement with readout from 0 to 1.999.

OPTIONS
The DP301AN can be configured for four voltage input ranges, three decimal-point positions, and high-impedance 3-wire ratio input. Mechanical options include a screw-terminal barrier strip for signal and power and a splash-proof lens cover which meets NEMA 4 (IP65) standards.

SPECIFICATIONS
Noise Rejection
NMR: 56 dB, 50/60 Hz
CMR, AC GND to SIG GND: 120 dB, DC to 60 Hz
CMR, SIG LO to SIG GND: 80 dB, DC to 60 Hz
CMV, AC GND to SIG GND: 1500 Vp per HV test, 354 Vp per IEC spacing
CMV, SIG LO to SIG GND: ±1 Vp
Power
AC Voltage: 115 or 230 Vac, ±15%
AC Frequency: 49 to 440 Hz
DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp
Power Consumption: 2.4 W (nominal)
Output Voltages: 4.7 Vdc and -4.6 Vdc ±5%, 10 mA max
Display
Type: 7-segment, red LED
Height: 14 mm (0.56")
Symbols: -1.8.8.8
Decimal Points: Three positions programmable internally or at connector
Overrange Indication: Three least-significant digits blank
Environmental
Operating Temperature: 0 to 60°C
Storage Temperature: - 40 to 85°C
Relative Humidity: 95% at 40°C (non-condensing)
Analog-To-Digital Conversion
Technique: Dual-slope, average-value
Polarity: Automatic
Signal integration period: 100 ms Signals
HOLD and TEST Inputs: TTL or 5V CMOS compatible
Mechanical
Bezel: 96 W x 48 H x 5.1 mm D (3.78 x 1.89 x 0.20")
Depth Behind Bezel: 104 mm (4.09")
Panel Cutout: 92 W x 45 mm H (3.62 x 1.77")
Weight: 14 oz (400 g)
Case Material: 94V-0 UL-rated polycarbonate
Accuracy at 25°C
Maximum Error: ±0.05% of reading ±1 count
Span Tempco: ±0.01% of reading/°C
Step Response: 1 s
Warmup to Rated Accuracy: 10 min
Input Configuration
Configuration: Differential, bipolar
Zero: Automatic
Span Adjustment: ±5%
(Specify Model Number)
Part Number/Desc.
Qty
Description
DP301AN-2
Consult Sales  
Availability: 
 
 
3-1/2 digit voltmeter for new applications, ±199.9 mVdc
DP301AN-3
Consult Sales  
Availability: 
 
 
3-1/2 digit voltmeter, ±1.999 Vdc input range,115 Vac, 50/60 Hz power
DP301AN-4
Consult Sales  
Availability: 
 
 
3-1/2 digit voltmeter, ±19.99 Vdc input range,115 Vac, 50/60 Hz power
DP301AN-4-D4
Consult Sales  
Availability: 
 
 
3-1/2 digit voltmeter, ±19.99 Vdc input range,115 Vac, 50/60 Hz power with D4 connector / screw terminal barrier strip.
DP301AN-5
Consult Sales  
Availability: 
 
 
3-1/2 digit voltmeter, ±199.9 Vdc input range,115 Vac, 50/60 Hz power.
DP301AN-5-D4
Consult Sales  
Availability: 
 
 
3-1/2 digit voltmeter, ±199.9 Vdc input range,115 Vac, 50/60 Hz power with D4 connector / screw terminal barrier strip.
All prices on this site are shown in Singapore Dollars.

Option Descriptions:


(1) Model select from:
DP301AN for 3-1/2 digit voltmeter

(2) Input Range select from:
-2 for ±199.9 mVdc
-3 for ±1.999 Vdc
-4 for ±19.99 Vdc
-5 for ±199.9 Vdc

(3) 3-Wire Ratio Input Impedance (DC input) select from:
Nothing(leave field blank) for Standard
-HZ for High impedance (100 mOhm)

(4) decimal Point select from:
Nothing(leave field blank) for decimal point programmable at D1 connector
-DP1 for 1.999 internally-wired
-DP2 for 19.99 internally-wired
-DP3 for 199.9 internally-wired

(5) Power options select from:
Nothing(leave field blank) for 115 Vac 50/60 Hz power
-C1 for 230 Vac 50/60 Hz
-C3C for Isolated 9 to 32 Vdc
-C3E for Isolated 26 to 56 Vdc

(6) Add-On Option select from:
Nothing(leave field blank) for red LED display
-G for Green LED display

(7) Add-On Option select from:
Nothing(leave field blank) for no option
-D4 for Screw-terminal barrier strip for power and signal (removes power and signal from D1).
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.