FPUD1100, FPUDM1100, FPUDV1100, FPUDVM Series
Diaphragm-Type Injection Metering Pumps
See All Models Below
-
Large Outlet Flowrate up to 360 GPD/1363 Liters per Day
-
High Outlet Pressure Capability of 150 PSIG (10.4 bar) (Most Models)
-
Easy Access, Front Mounted Mechanical Feed Rate Adjustment
-
Ball Bearing Supported Motor Drive Shaft
-
Permanently Lubricated Ball Bearing Motor
-
Digital Electronic Feed Rate Control Available
-
20:1 Adjustment Turn Down Ratio (FPUD1000 Basic Model Only)
-
4000:1 Adjustment Turn Down Ratio (Digital Models)
-
Pump Service Inpection Warning Timer (Digital Models)
-
Acceptable for Indoor Use [NEMA 3R (IP14)]
Pumps & Mixers - View related products
† All prices on this site are shown in Singapore Dollars.
Note: * Note: 260.8 GPD = 100 PSI max.; 305.7 GPD = 80 PSI max.; 360.0 GPD = 25 PSI max.
Comes complete with suction tube foot valve & strainer, suction tube weight, 1.5 m (5') PVC suction tubing, 3 m (10') PE discharge tubing and injection fitting with internal back-flow check valve, mounting hardware and operator’s manual.
Option Descriptions:
(1)
Variable Speed select from:Nothing(leave field blank) for None
V for Variable speed digital touchpad
VM for Variable speed dial knob control
(2)
Motor Speed Adjustment select from:Nothing(leave field blank) for None
M for Motor speed adjustment
(3)
Max Feed Rate select from:01 for 15.0 GPH (56.8 LPH)
02 for 12.7 GPH (48.2 LPH)
03 for 10.8 GPH (41.1 LPH)
04 for 6.4 GPH (24.6 LPH)
05 for 4.9 GPH (18.9 LPH)
06 for 3.8 GPH (14.4 LPH)
07 for 3.0 GPH (11.5 LPH)
08 for 2.4 GPH (9.1 LPH)
09 for 1.5 GPH (6.0 LPH)
Note: All combinations may not be valid, check spec sheet for valid part numbers.