From Sep 1st 2018, DP520 Series will be discontinued. As a possible substitute, please check out the DPPt Meter or DP20 Meter for details.
The DP3520 is an economical 5-volt powered,
high-resolution, high-accuracy 4-1/2 digit DC voltmeter
in a compact 1/16 DIN case. The height of the panel
cutout is only 22 mm (0.88"). The depth behind the
panel is only 72 mm (2.83").
Low cost, small size, low power consumption and
exceptional power-supply noise rejection make the
DP3520 ideal for demanding OEM and portableinstrument
applications. Non-isolated character-serial
BCD output is standard to allow the DP3520 to be
interfaced to other instrumentation.
PARALLEL BCD OPTION F2M
The F2M option is an upper board which
converts the meter’s serial BCD output to
non-isolated, three-state parallel BCD. An address
decoder on the board permits the meter’s parallel
BCD outputs to be enabled by a 4-bit binary address
signal for three-state data-busing applications.
Options:
Three-State Parallel BCD Output
High-Impedance 3-Wire Ratio Input
SPECIFICATIONS Noise Rejection NMR: 60 dB at 50/60 Hz CMR: 86 dB, DC to 60 Hz CMV: SIG LO to DIG GND ±1 Vp
Accuracy at 25°C Maximum Error: ±0.01% of reading
±2 counts Span Tempco, Standard: (2 V)
±0.005% of reading/°C, (20/200 V)
±0.0025 of reading/°C Span Tempco, Optional -LT discontinued: (2 V)
±0.001% of reading/°C, (20/200 V)
±0.002% of reading/°C Step Response: 2 s Warmup to Rated Accuracy: 0.5 hr
Signal Input Configuration: Bipolar, true-differential Zero: Automatic
Analog-To-Digital Conversion Technique: Dual-slope, average-value Polarity: Automatic Signal Integration Period: 100 ms Read Rate: 2.5/s
3-Wire Ratio Reference Reference Voltage: 0.5 to 3.0V Load on Reference, Std: 40 kΩ Load on Reference, Opt: 1 GΩ Display Type: 7-segment, red LED Height: 14 mm (0.56") Symbols: -1.8.8.8.8 Decimal Points: Four positions
programmable internally or at connector Overrange Indication: Display flashes
Digital Signals Output Signals: TTL-compatible Hold Input: TTL or 5V CMOS compatible Blanking Input: Open-collector compatible
Power Voltage: 5 Vdc ±5% Current: 170 to 230 mA Power Consumption: 1 W (nominal)
EnvironmentalOperating Temperature: 0 to 55°C
Storage Temperature: -40 to 85°C Relative Humidity: 95% at 40°C(non-condensing)
Mechanical Dimensions: 24 H x 96 W x 72 mm D
(0.94 x 3.77 x 2.82") Panel Cutout: 22.2 x 92 mm
(0.874 x 3.622") Weight: 5 oz (145 g) Case Material: 94V-0 UL-rated
polycarbonate
† All prices on this site are shown in Singapore Dollars.
Part Number Builder
Option Descriptions:
(1)
Model select from: DP3520 for 4-1/2 digit 5 Vdc powered voltmeter
(2)
Input Range select from: -3 for ±1.9999 Vdc -4 for ±19.999 Vdc -5 for ±199.99 Vdc
(3)
Span Tempco (Temperature Coefficient) select from: Nothing(leave field blank) for Standard (±0.005% of reading/°C) span
tempco
(4)
Upper Board Output Options select from: Nothing(leave field blank) for Standard serial BCD output non-isolated -F2M for Parallel BCD output three-state (mutually exclusive with PA)
Includes PCB edge connector
(5)
Case Mounting select from: Nothing(leave field blank) for spring clamp case mounting -UC for U-shaped mounting clamp
(6)
Add-On Option select from: Nothing(leave field blank) for red LED display -G for Green LED display
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.