Process Indicators, DPM35A Miniature 1/32 DIN Model, DP35 Loop Powered 1/8 DIN Model

DP35

See All Models Below

PLACE ORDER

3 1/2 Digit Display
User-Selectable Inputs
Minimal Panel Depth
0.2% Accuracy
10-30 Vdc Power, Isolated
Scalable to Engineering Units, with Selectable Decimal Point

Instrumentation for Pressure and Strain Measurements - View related products

Description

The DPM35A is a compact process indicator, requiring only than 70 mm of depth behind a panel. This instrument utilizes a 45 x 22.2 mm cutout, 1/32 DIN, with large, 10 mm display digits. Inputs are connected via a rear screw clamp connector. The DPM35A can accept input voltage ranges ,from 0 to 200 Vdc, and current from 0 to 50 mA. In addition, the unit can be scaled for both zero and span, to display in engineering units. The decimal point position is also jumper selected. The DP35 is an 1/8 DIN loop powered process indicator that can be jumper configured to select one of three input ranges, 1-5 mA, 4-20 mA or 10-50 mA. Like the DPM35A, the DP35 can be scaled for both zero and span to display in engineering units and has jumper selectable decimal point position.

(Specify Model Number)

Part Number/Desc.

Qty

Description

DP35

Consult Sales

Availability:

1/8 DIN LCD process indicator, loop powered

DPM35A

Consult Sales

Availability:

1/32 DIN LED process indicator

† All prices on this site are shown in Thai Baht.
Note: Comes with complete operator’s manual.
Ordering Example: (1) DPM35A 1/32 DIN process indicator, THB10,151.72