Economical 4-20 mA Loop-Powered Indicator

DPF300 Series

See All Models Below

PLACE ORDER

Available with Dual Rate/Total, Display
Linear or Square Root Extraction of Input
8-Digit Totalizer Display
Calibration Fully Programmable Through Keypad

Instrumentation and Accessories - View related products

Description

The DPF301 Series comprises 4 to 20 mA loop-powered panel-mount indicators that display process variables in engineering units (GPM, LPM, psig, %RH, etc.), with an adjustable decimal point for rate and total display. Because these indicators take power directly from the current loop, the user can perform programming on the front keypad; there are no jumpers to configure or potentiometers to scale. An internal lithium battery ensures that all programming is retained in memory, even when the loop power is disconnected. The DPF301 can be programmed for either a linear input or square root extraction for use with differential pressure flowmeters.

The DPF301 general purpose indicator features one 41.2 digit rate display, while the DPF302 flow indicator has a dual, 2-line, 4½ digit rate display and 8-digit totalizer. The totalizer can be reset from either the front keypad or remotely via a contact closure.

The DPF300 Series indicators are available in a choice of panel-mount, NEMA 4X (IP66), or explosion-resistant enclosures.

SPECIFICATIONS
Scalable Input Range: 3.8 to 21 mA Internal Battery (Memory Only): 3V 250 mAh lithium (2-year standby life) Rate Display (DPF301 and DPF302): 41.2 digits max (19999), 8.89 mm (0.35") high Totalizer Display (DPF302 Only): 8 Digits (99999999), 5.08 mm (0.2") high
Rate Descriptors: /sec, /min, /hr or "blank"
Unit Descriptors: Gal, Lit, FT3, M3, "blank"
Display Indications: Low battery and under/over range
Input: 4 to 20 mA DC, overcurrent protection to 60 mA, reverse polarity protected
Loop Voltage Drop: 6V max Housing
Standard: Round panel mount with NEMA 4X (IP66) sealed keypad membrane
Optional: Glass-filled polycarbonate NEMA 4X (IP66) enclosure, or explosion-resistant housing for NEMA 7, NEMA 4 (IP66), Class I, Groups B, C and D; Class II, Groups E, F and G
Ambient Temperature: -20 to 70°C (-4 to 158°F)
Extended Temp Option: -30 to 70°C (-22 to 158°F)
Accuracy (Rated @ 20°C): 0.1% FS resolution, ±1 count
Temperature Drift: 50 ppm/°C typical, 200 ppm/°C worst case
Low Cutoff: A rate below 1% of selected scale (10% of square root scale) will assume the "set lo" value
Update Rate: For rate or total, once every 2 seconds
Weight:
    Basic Unit: 227 g (0.5 lb)
    With NEMA Enclosure: 454 g (1 lb)
    With Explosion-Resistant Housing: 1.6 kg (3.5 lb)

(Specify Model Number)

Part Number/Desc.

Qty

Description

DPF301

THB18,475.00

Availability: 7 weeks

General purpose panel mounted 4-20 mA loop-powered ratemeter/indicator

DPF301-NEMA

THB24,545.00

Availability: 7 weeks

NEMA 4x housing for panel mounted 4-20 mA loop-powered ratemeter/indicator

DPF301-EXP

THB36,155.00

Availability: 7 weeks

Explosion resitant housing for panel mounted 4-20 mA loop-powered ratemeter/indicator

DPF302

THB19,795.60

Availability: 1 week

Panel-mounted 4-20 mA loop-powered ratemeter and totalizer for flow

DPF302-NEMA

THB26,505.00

Availability: 7 weeks

NEMA 4x housing for panel mounted 4-20 mA loop-powered ratemeter and totalizer for flow.

DPF302-EXP

THB37,740.00

Availability: 7 weeks

Explosion resitant housing for panel mounted 4-20 mA loop-powered ratemeter and totalizer for flow

† All prices on this site are shown in Thai Baht.
Note: Comes complete with operator’s manual.

For NEMA 4X polycarbonate enclosure, add suffix "-NEMA" to model number, add $100 to price.

For explosion-resistant housing, add suffix "-EXP" to model number, add $305 to price.

(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)

Ordering Example: (1) DPF301-EXP loop-powered ratemeter/indicator with optional explosion-resistant housing, THB36,155.00