Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Thailand: 001 800 441 0237
International+65 6415 5353

Peristaltic Pump and Pump Motor  - Discontinued

FPU500 FPU5MT

Peristaltic Pump and Pump Motor | FPU500 FPU5MT

Peristaltic Pump and Pump Motor

See All Models Below

  • OMEGAFLEX™ PERISTALTIC PUMP
  • Stainless Steel Rotor Assembly
  • Ideal for Use in Sterile, Corrosive, or General Operating Environments
  • Flowrates from 1.0 to 2280 mL/Min (36 GPH)
  • Mounts Directly onto OMEGAFLEX ® Motor or Compatible Pump Motor
  • Easily Stackable Mounting for Multichannel Pumping
  • Three-Roller Geometry Reduces Pulsation and Improves Priming
  • Polysulfone Housing for Durability and Chemical Resistance
  • FPU5-MT PUMP MOTOR
  • Digital Display of Flowrate, RPM, Total Volume, Fluid Temperature (°F or °C), Flow Duration, or Tube ID
  • Flow Rate 1.0 to 2280 mL/Min (10 to 600 RPM) Reversible
  • Easy-to-Read Display
  • Type K SMP Female Thermocouple Input
  • Tachometer Feedback, ±0.5% Speed Control
  • Accepts Two Pumps, One on Each Side or Two Stacked Together
  • Membrane Keypad for Easy Calibration
  • Remote Control Options Aux. In: Remote Start/Stop Aux. Out: Remote Monitor
  • Built-In Electronic Braking and Reversing for Fast Stops and Directional Changes
  • Accepts Metric or English Tube Sizes
  • Displays Information in English, French, Spanish, German, or Italian

Description

The FPU500 FPU5MT series has been discontinued. Please see the FPU2000A as a possible alternative or contact our Flow Engineering department.

The FPU500 Series peristaltic pumps from OMEGA offer exceptional simplicity, ease of use, and variable flow capability. A motor turns the pump’s rollers, which squeeze fluid through precision-bore tubing in a wavelike motion. The fluid does not come into contact with the pump; only the outside wall of the tubing does. This makes these pumps ideal for use in sterile, corrosive, or general fluid flow operating environments.

The pump is self-priming and non-siphoning. When one section of the tube fatigues, simply move the tube along to an unused section and continue pumping. No tools are required to load the tube. A precision-molded tubing cavity provides the proper occlusion for the recommended tubing. A tube clamp holds the tubing securely in place. Tubing is easily changed without removing the pump.

One pump can be used for many different applications, or you can mount two pumps onto the motor. The pumps work with a wide variety of OMEGAFLEX™ plastic tubing. Vinyl, FKM, Tygon, silicone, Santoprene, and Norprene® tubing can be purchased in a broad range of sizes. The standard rotor assembly is made of stainless steel.

The FPU500 pump can be purchased with an optional adaptor plate that can be used to mount the pump to a motor other than the FPU5-MT pump motor. The pump comes standard with 2 short mounting screws, used to mount one pump at a time. If you need to stack two pumps, order long mounting screws.

SPECIFICATIONS
Maximum Back Pressure: 20 psi
Maximum RPM to Prime: 100 RPM
Tube Wall: 1.6 mm (116")
Fluid Temperature Range: -46 to 149°C (-50 to 300°F)
Dimensions, Pump: 102 H x 102 W x 57 mm D (4 x 4 x 2¼")
Optional Mounting Plate: 76 H x 64 W x 3.2 mm D (3 x 2½ x 18")
Weight, Pump: 408 g (14.4 oz)
Optional Mounting Plate: 91 g (32 oz)
Maximum Tubing Size: 8 mm (516")
Maximum Tube Durometer: 65 Shore A

The OMEGAFLEXR FPU5-MT pump motor offers microprocessor control and a digital display, and is designed to be fully compatible with OMEGA's FPU500 pump. No mounting plate is needed, just two mounting screws. A 110 HP (75 W) motor provides flow rates of up to 2280 mL/minute. The user enters values and controls all operations through a convenient membrane keypad. A dot matrix LCD provides for easy viewing. Calibrating the unit is easy with the user-friendly control software. Simply select a tubing size and the desired flow rate, and the pump motor locks in the required RPM. Select nominal calibration values stored in ROM (read only memory) or calibrate via gravimetric or flowmeter measurements. Fluid temperature may be displayed (using an optional thermocouple probe). The last flow settings are stored in memory when the drives are shut off.

SPECIFICATIONS
Motor: Reversible, 110 HP (75 W), 90 Vdc
Display: 16-character dot matrix LCD, 9 mm H (38") characters
Power: 90 to 130 Vac, 1.5 A; 190 to 260 Vac, 0.8 A
Line Cord: 1.8 m (6') with U.S. standard plug on 115 Vac units; European plug on 230 Vac units
Housing: Painted sheet metal with rubber feet; units are stackable
Dimensions: 152 H x 254 W x 254 mm D (6 x 10 x 10")
Weight: 8.2 kg (18 lb)
(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
FPU500
FPU500
Consult Sales  
Availability: 
 
 
Peristaltic Pump Head
  
FPU5-MT-110
Consult Sales  
Availability: 
 
 
110 Vac Pump Motor
FPU5-MT-220
FPU5-MT-220
Consult Sales  
Availability: 
 
 
220 Vac Pump Motor
Accessories
FPU500-AP
FPU500-AP
Consult Sales  
Availability: 
 
 
Adapter plate
  
FPU500-LMS
THB391.55
Availability: 1 week
 
Long mounting screws (2)
  
FPU500-SMS
THB391.55
Availability: 1 week
 
Short mounting screws (2)
  
FPU500-RA
Consult Sales  
Availability: 
 
 
Replacement rotor assembly
All prices on this site are shown in Thai Baht.
Note: The FPU500 pump can be purchased with an optional adaptor plate that can be used to mount the pump to a motor other than the FPU5-MT pump motor. The pump comes standard with 2 short mounting screws, used to mount one pump at a time. If you need to stack two pumps, order long mounting screws.
 
We noticed you are from the US. Visit your local site for regional offers and live support.