Vortex Flow Meters for Industrial Applications

FV500C

Vortex Flow Meters | Industrial

See All Models Below

PLACE ORDER

Custom Built to Order - CONSULT FLOW ENGINEERING
SSP (Spectral Signal Processing) Technology
Measures Steam, Gas, and Low Viscosity Liquids
Clear Parallel Two-Line LCD Display. Displays Simultaneous Flow Rate and Total Along with Process Diagnosis
New, Compact Amplifier Housing: Lighter, Small and Easier to Handle
No Start-Up Tuning
Low Flow Stability
Advanced Self-Diagnostics
No Moving Parts
Simultaneous Analog and Pulse Outputs (Pulse requires Display)
Status Output (Flow Switch Function) or Alarm Output
Configurable Through Local Display Interface
High Accuracy: ±0.75% Rdg (Liquid), ±1% Rdg (Gas, Steam)
Learn more about the principle of vortex flow meters.

Vortex Shedding Flow Meters and Pitot Tubes - View related products

Description

THIS PRODUCT REQUIRES YOU TO CONSULT WITH FLOW ENGINEERING PRIOR TO ORDERING
Please be prepared to complete the "Vortex/Pitot Tube Order Questionnaire" (Download in the Related Links Below) so you can fax or email it to Flow Engineering.

OMEGA’s FV-500C Series vortex flowmeter provides accurate, reliable, low-maintenance flow measurement. Vortices generated by the flowing fluid stress the shedder bar in pulses, and the shedder bar transmits the stress pulses to the encapsulated piezoelectric sensor.

Please contact Omega FLOW Engineering by phone, fax, or email flow@omega.com to size the vortex flow meter for your application. All the vortex meters are custom built to order. A display is highly recommended for any fine tuning adjustments required.

Based on the field proven sensor technology of the FV-500C Series vortex flowmeters, FV-500C features a new amplifier with proprietary spectral signal processing (SSP) technology to analyze the vortex waveform into its spectral components to filter noise from signal for the most stable measurement possible.

The FV-500C Series will provide excellent vibration immunity for stable, accurate measurements at low flows without any need for start-up tuning. The user benefits through greater reliability, reduced maintenance and a lower total cost of ownership.

The programmable display allows access to the full power of OMEGA’s new intelligent amplifier. The display is required if you would like to access the pulse output programming. The display is highly recommend if an adjustment or tweaking is required for the flow measurement application. The display also permits the user to display flow rate and/or total in engineering units for liquids and gases. Rate and total are displayed simultaneously. If the density or enthalpy of the fluid is constant (i.e. the temperature and pressure do not change), the density value can be entered into the meter to display in kilograms, pounds or metric tons; the enthalpy value can be entered to display in BTUs, kilojoules, etc. Analog output span adjustment and low cutoff are also settable from the display, there is no need to adjust pots. The analog and pulse outputs can also be forced to output from 0 to 100% FS or 0 to 6000 Hz without any flow through the meter as a test of the amplifier. For steam flow measurement, the FV-500C can be used with the OMEGA™ FC-20 mass flow computer. The standard FV-500C is wafer-style to slip between 150# ANSI flanges, and comes supplied with extra long bolts for installation. Units with the suffix “-F” have 150# ANSI flanges, 300 lb flange mount is available.

Model No. (Without Display Module)	Description	Lay Length (mm/inches)	Weight (kg/lbs)
FV-505C	1/2" wafer mount	70 (2.8)	2.8 (6)
FV-505C-F	1/2" flange mount	70 (2.8)	2.8 (6)
FV-510C	1" wafer mount	70 (2.8)	3.7 (8)
FV-510C-F	1" flange mount	70 (2.8)	3.7 (8)
FV-515C	1 1/2" wafer mount	70 (2.8)	4.3 (9.5)
FV-515C-F	1 1/2" flange mount	70 (2.8)	4.3 (9.5)
FV-520C	2" wafer mount	75 (3.0)	6 (14)
FV-520C-F	2" flange mount	75 (3.0)	6 (14)
FV-530C	3" wafer mount	100 (3.9)	9.4 (21)
FV-530C-F	3" flange mount	100 (3.9)	9.4 (21)
FV-540C	4" wafer mount	120 (4.7)	12.8 (28)
FV-540C-F	4" flange mount	120 (4.7)	12.8 (28)
FV-560C-F	6" flange mount	270 (10.6)	36.4 (80)
FV-580C-F	8" flange mount	310 (12.2)	55.4 (122)
FV-591C-F	10" flange mount	370 (14.6)	90 (199)
FV-592C-F	12" flange mount	400 (15.7)	140 (308)

Note: Units with “ -F” suffix have 150 class flange connections, 300 lb flange mount is available if needed.
For units with a display, add “-D” to the part number and $403 to the price.
For units with remote electronics, add “-R” to the part number, subtract $455 from the price, and order the mounting kit and cable below.
For units designed for high temperature use, add “-HT” to the model number and consult engineering for prices.

THIS PRODUCT REQUIRES YOU TO CONSULT WITH FLOW ENGINEERING PRIOR TO ORDERING
Please be prepared to complete the "Vortex/Pitot Tube Order Questionnaire" (Download in the Related Links Below) so you can fax or email it to Flow Engineering.

(Specify Model Number)

Part Number/Desc.

Qty

Description

DY015-DBMAA1-2D/FF1

Consult Sales

Availability:

1/2" Wafer Style Vortex Flowmeter W/Display

DY015-DBMAA1-2N/FF1

Consult Sales

Availability:

1/2" Wafer Style Vortex Flowmeter

DY015-DBMBA1-2D/FF1

Consult Sales

Availability:

1/2" ANSI class 150 Flange Vortex Flowmeter W/Display

DY015-DBMBA1-2N/FF1

Consult Sales

Availability:

1/2" ANSI class 150 Flange Vortex Flowmeter

DY025-DBMAA1-2D/FF1

Consult Sales

Availability:

1" Wafer Style Vortex Flowmeter W/Display

DY025-DBMAA1-2N/FF1

THB145,688.94

Availability: 14 weeks

1" Wafer Style Vortex Flowmeter

DY025-DBMBA1-2D/FF1

Consult Sales

Availability:

1" ANSI class 150 Flange Vortex Flowmeter W/Display

DY025-DBMBA1-2N/FF1

Consult Sales

Availability:

1" ANSI class 150 Flange Vortex Flowmeter

DY040-DBMAA1-2D/FF1

Consult Sales

Availability:

1 1/2" Wafer Style Vortex Flowmeter W/Display

DY040-DBMAA1-2N/FF1

Consult Sales

Availability:

1 1/2" Wafer Style Vortex Flowmeter

DY040-DBMBA1-2D/FF1

Consult Sales

Availability:

1 1/2" ANSI class 150 Flange Vortex Flowmeter W/Display

DY040-DBMBA1-2N/FF1

Consult Sales

Availability:

1 1/2" ANSI class 150 Flange Vortex Flowmeter

DY050-DBMAA1-2D/FF1

Consult Sales

Availability:

2" Wafer Style Vortex Flowmeter W/Display

DY050-DBMAA1-2N/FF1

Consult Sales

Availability:

2" Wafer Style Vortex Flowmeter

DY050-DBMBA1-2D/FF1

Consult Sales

Availability:

2" ANSI class 150 Flange Vortex Flowmeter W/Display

DY050-DBMBA1-2N/FF1

Consult Sales

Availability:

2" ANSI class 150 Flange Vortex Flowmeter

DY080-DBMAA1-2D/FF1

Consult Sales

Availability:

3" Wafer Style Vortex Flowmeter W/Display

DY080-DBMAA1-2N/FF1

Consult Sales

Availability:

3" Wafer Style Vortex Flowmeter

DY080-DBMBA1-2D/FF1

Consult Sales

Availability:

3" ANSI class 150 Flange Vortex Flowmeter W/Display

DY080-DBMBA1-2N/FF1

Consult Sales

Availability:

3" ANSI class 150 Flange Vortex Flowmeter

DY100-DBMAA1-2D/FF1

Consult Sales

Availability:

4" Wafer Style Vortex Flowmeter W/Display

DY100-DBMAA1-2N/FF1

Consult Sales

Availability:

4" Wafer Style Vortex Flowmeter

DY100-DBMBA1-2D/FF1

Consult Sales

Availability:

4" ANSI class 150 Flange Vortex Flowmeter W/Display

DY100-DBMBA1-2N/FF1

Consult Sales

Availability:

4" ANSI class 150 Flange Vortex Flowmeter

DY150-DBMBA1-2D/FF1

Consult Sales

Availability:

6" ANSI class 150 Flange Vortex Flowmeter W/Display

DY150-DBMBA1-2N/FF1

Consult Sales

Availability:

6" ANSI class 150 Flange Vortex Flowmeter

DY200-DBMBA1-2D/FF1

Consult Sales

Availability:

8" ANSI class 150 Flange Vortex Flowmeter W/Display

DY200-DBMBA1-2N/FF1

Consult Sales

Availability:

8" ANSI class 150 Flange Vortex Flowmeter

DY250-DBLBA1-2D/FF1

Consult Sales

Availability:

10" ANSI class 150 Flange Vortex Flowmeter W/Display

DY250-DBLBA1-2N/FF1

Consult Sales

Availability:

10" ANSI class 150 Flange Vortex Flowmeter

DY300-DBLBA1-2D/FF1

Consult Sales

Availability:

12" ANSI class 150 Flange Vortex Flowmeter W/Display

DY300-DBLBA1-2N/FF1

Consult Sales

Availability:

12" ANSI class 150 Flange Vortex Flowmeter

Accessories

DYC-1-CF

Consult Sales

Availability:

100 Foot Cable

DYC-1-1F

Consult Sales

Availability:

10 Foot Cable

DYC-1-3F

Consult Sales

Availability:

30 Foot Cable

DYC-1-5F

Consult Sales

Availability:

50 Foot Cable

DYC-1-7F

Consult Sales

Availability:

70 Foot Cable

DYA-D2N

Consult Sales

Availability:

Integral to Remote Electronics

DYA-D2D

Consult Sales

Availability:

Integral to Remote Electronics Display

† All prices on this site are shown in Thai Baht.
Note: Comes with complete operators manual.

300 lb flange mount are available at an additional cost, Consult Flow Engineering for price.

For units with remote electronics, add suffix "-R" to the model number; no additional cost. **Units with remote electronics require a mounting kit and cable from the Accessories list.

For units designed for high temperature applications, add suffix "-HT" to the model number; Consult Flow Engineering for price.

For NIST calibration, add suffix "-NIST" to the model number; add $350 to the price.

A display is required to access pulse output programmability.

(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)