Cart  |  Contact  |  Help  | 
Toll-Free in Malaysia: 1800 88 3496
International+65 6415 5353

ACC102

acceleration sensor | ACC102

acceleration sensor

See All Models Below

RoHS
  • Ideal for Harsh Environments
  • Hermetically Sealed
  • Superior Low Noise Floor for High Resolution
  • Rugged Strain Relief on Integral Cable
  • Fast Turn-on Time (1 Sec)
  • High EMI Noise Rejection
  • 100 mV/g Output
Dynamic Measurement - View related products

Description

The ACC102A accelerometer uses a shear mode design for high performance. It has a rugged stainless steel inner structure covered by a molded polymer. This construction makes the ACC102 impervious to harsh environments, such as alkaline coolants, hot oil and water sprays, resulting in long, reliable service. Additional features include high shock protection (to protect from dropping or mishandling), cross wire protection (protects against miswiring), and up to 1000 volt static discharge protection. The ACC102 has a high 100 mV/g output and measures across wide frequency and acceleration ranges. A low impedance cable allows for runs up to 1000 ft. The ACC102 exhibits the low noise floor and high amplitude linearity you’d expect in more expensive units.

SPECIFICATIONS
Excitation: 2 mA @ 24 to 30 Vdc, constant current (18 V supply can be used but will limit amplitude range)
Rated Output: 100 mV/g nominal at 100 Hz
Frequency Range: 3 Hz to 5 kHz (up to ±5% rated output shift)
Amplitude Range: ±40 g peak w/ACC-PS1, ±75 g peak w/ACC-PS2, ACC-PS3
Amplitude Linearity: 1% up to 65 g peak
Temperature Range: -40 to 82°C (-40 to 180°F)
Temperature Sensitivity Effect:
-54 to 38°C (-65 to 100°F): ≤5% FS;
38 to 121°C (100 to 250°F): ≤8% FS
Thermal Shock: 1.2 g/°C
Transverse Sensitivity: 7% of axial max
Maximum g Without Damage: 5000 g peak
Maximum g Without Clipping: 75 g peak
Mounted Resonance Frequency: >23 kHz nominal
Output Impedance: 200 Ω nominal
Bias Voltage: 13 V nominal
Base Strain: 0.04 g/microstrain nominal
Noise Floor (Wideband): 0.0003 g (rms)
Weight: 50 g (1.8 oz) nominal (without cable)
Material:
   Inner Housing: 303 SS
   Outer Jacket: Non-conductive composite polymer
Dimensions: 2.16 H x 2.54 cm D (0.85 x 1.00")
Connector: 2.5 m (10') integral coaxial cable to BNCM
Mounting: 10-32 removable stud
Mounting Torque Max: 22 cm-kg (20 in-lb)
(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
RoHS
Description
Quick Ship
ACC102A
ACC102A
Consult Sales  
Availability: 
 
RoHS compliancy undetermined
Industrial accelerometer with 10 foot cable
Quick Ship
ACC-PS1
ACC-PS1
Consult Sales  
Availability: 
 
RoHS compliant
9 volt battery powered accelerometer power supply
Quick Ship
ACC-PS2
ACC-PS2
MYR2,860.00
Availability: 3 weeks
RoHS compliancy undetermined
Rechargeable battery powered accelerometer power supply and amplifier
Quick Ship
ACC-PS3
ACC-PS3
MYR2,785.00
Availability: 3 weeks
RoHS compliancy undetermined
AC powered accelerometer power supply
Quick Ship
ACC-CB4-15
ACC-CB4-15
MYR342.00
Availability: In Stock
RoHS compliancy undetermined
15 foot coaxial cable (BNCM/BNCM)
Quick Ship
ACC-CB5-2
ACC-CB5-2
MYR184.00
Availability: 7 weeks
RoHS compliancy undetermined
2 foot coaxial cable (BNCM/banana plug)
Quick Ship
ACC-CB6
ACC-CB6
MYR97.00
Availability: In Stock
RoHS compliancy undetermined
7 inch coaxial cable (BNCM/pigtail)
All prices on this site are shown in Malaysian Ringgit.