Call Us
Now
Cart  |  Contact  |  Help  |  info@sea.omega.com  | 
1800 88 3496  | 
Toll-Free in Malaysia: 1800 88 3496
International+65 6415 5353

DIN Rails, Standard and Pre-Cut Lengths

DRTB-Rail Series

Standard and Pre-Cut Lengths Din Rails ready to ship | Omega | DRTB-Rail Series

SGD9.24 DRTB-RAIL-3575-1

PLACE ORDER
  • 35x7.5 mm & 35x15 mm in 1 Meter & 2 Meter Lengths
  • Steel with Electrolytic Zinc Plating
  • Pre-Cut Lengths Din Rails for Standard Sub-Panel Widths
  • Stand-Off Brackets: 45° Angle and Straight
  • Comply with DIN 50045, 50022 and 50035 Standards
Wire Connection - View related products

Description

DRTB-RAIL-3575 with Omega’s DRTB Thermocouple Terminal Blocks with Audit Capabilities The DRTB-Rails Series DIN Rails enhances design capabilities, saves space and reduces labor. DIN rails have been accepted throughout the world, allowing the designer to mount a wide variety on control components, devices and terminal blocks, etc. on the same rail. DRTB-Rails are perforated steel with electrolytic zinc plating and available in 35x7.5mm and 35x15 mm sizes. These DIN rails comply with DIN 50045, 50022 and 50035 standards.

Pre-Cut DIN Rails
Pre-cut DIN rails are offered in widths to match enclosure sizes. An enclosure, 12H x 10” W, would use DRTB-RAIL-10. This DIN rail measures 8.75" wide, just short of the 8.88" wide sub-panel.

Support Brackets
Support brackets elevate DIN rails away from the sub-panel to facilitate component wiring access. Angled brackets tilt the DIN rails by 45° to improve visibility. Straight brackets are available in three heights for optimum positioning of the rails.


Dimensions mm(in)		         
      Brackets include screws
      & lock washers
    
(Specify Model Number)
Part Number/Desc.
Qty
Description
DRTB-RAIL-3575-1
SGD9.24
Availability: 2 weeks
 
35 x 7.5 mm (1.4 x 0.3") slotted DIN rail, 1 m (3.3')
DRTB-RAIL-3575
SGD16.50
Availability: 1 week
 
35 x 7.5 mm (1.4 x 0.3") slotted DIN rail, 2 m (6.6')
DRTB-RAIL-3515-1
SGD13.48
Availability: 1 week
 
35 x 15 mm (1.4 x 0.6") slotted DIN rail, 1 m (3.3')
DRTB-RAIL-3515
SGD26.95
Availability: 1 week
 
35 x 15 mm (1.4 x 0.6") slotted DIN rail, 2 m (6.6')
Pre-Cut 35x7.5 mm DIN Rail - Lengths are Cut to match Width of Sub-Panels
DRTB-RAIL-4
SGD13.75
Availability: 1 week
 
Pre-cut DIN rail for 4" wide enclosure, actual width 2.75"
DRTB-RAIL-6
SGD13.75
Availability: 1 week
 
Pre-cut DIN rail for 6" wide enclosure, actual width 4.75"
DRTB-RAIL-8
SGD13.75
Availability: 1 week
 
Pre-cut DIN rail for 8" wide enclosure, actual width 6.75"
DRTB-RAIL-10
SGD13.75
Availability: 1 week
 
Pre-cut DIN rail for 10" wide enclosure, actual width 8.75"
DRTB-RAIL-12
SGD17.05
Availability: 3 weeks
 
Pre-cut DIN rail for 12" wide enclosure, actual width 10.75"
DRTB-RAIL-14/16
SGD16.50
Availability: 1 week
 
Pre-cut DIN rail for 14 or 16" wide enclosure, actual width 12.75"
DRTB-RAIL-20
SGD17.05
Availability: 1 week
 
Pre-cut DIN rail for 20" wide enclosure, actual width 16.75"
DRTB-RAIL-24
SGD16.50
Availability: 4 weeks
 
Pre-cut DIN rail for 24" wide enclosure, actual width 20.75"
DIN Rail Support Brackets - includes one M6x1 screw & lock washer per bracket
DRTB-RAIL-SBKT-45D-6PK
SGD19.25
Availability: 1 week
 
45° Angle bracket, pkg of 6
DRTB-RAIL-SBKT-1-6PK
SGD16.50
Availability: 6 weeks
 
1" H bracket, pkg of 6
DRTB-RAIL-SBKT-2-6PK
SGD25.00
Availability: 1 week
 
2" H bracket, pkg of 6
DRTB-RAIL-SBKT-3-6PK
SGD30.25
Availability: 1 week
 
3" H bracket, pkg of 6
Accessories (End stops to eliminate side-to-side movement)
T-BLK-EB
SGD1.87
Availability: 1 week
 
Therminal Block end stops, 1-screw
XBAES35C
SGD2.64
Availability: 1 week
 
Terminal block end stops, 1-screw
XBAES35T
SGD2.00
Availability: 1 week
 
Terminal block end stops, 3-screw
XBAES35N
SGD1.65
Availability: 1 week
 
Terminal block end stops, snap-on
† All prices on this site are shown in Singapore Dollars.
 Ordering Example: 

(3) DRTB-RAIL-10 3 pieces of pre-cut 35x7.5mm DIN rail for 10, SGD13.750  plus (1) DRTB-RAIL-3575 35x7.5mm DIN rail, 2 m long, SGD16.50  plus (1) DRTB-RAIL-3575-1 35x7.5mm DIN Rail, 1 m long, SGD9.24, SGD13.75 X 3 + 16.50 + 9.24 = SGD66.99
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >