Digital Closed Loop Controller For Use With AC or DC Adjustable Speed Drive Systems

OMDC-ASP10 Digital Closed Loop Controller

Digital Closed Loop Motor Controller

^SGD1,797.55 OMDC-ASP10

PLACE ORDER

Connects to Speedpot Input of AC and DC Motor Drives
Adjustable Min/Max and Accel/Decel Speeds
Pulse Input Capacity of 50,000 PPM, 833 Hz
Display Programmable for All Engineering Units
NEMA 4X Rated Faceplate
Universal Power Supply: 85 to 265 Vac
Programmable Alarm Output
Multiple Operational Modes: Rate, Time, Follower
Output is 0-2 to 0-24 VDC

Drives & Motors - View related products

Description

Sample Application: A pump control which displays liters per minute with an alarm to warn operator of low or stopped flow

The OMDC-ASP10 is a compact, economical control that can be used with conventional AC, DC, or Brushless DC adjustable speed drive systems to provide an LED display of set speeds and precise, digital closed loop motor speed control. An on-board microprocessor with non-volatile memory coupled with sophisticated internal software makes the OMDC-ASP10 the ultimate in accuracy and control. Target speeds are displayed directly in RPM, FPM, GPM, process time, or any other engineering unit of measure. Friendly front-panel field programming permits customizing the controller to the exact specifications for each application; maximum and minimum set speed, decimal points or colon, operating mode (master or follower), and the constant which takes into account motor gear ratios.

The OMDC-ASP10 is simple to operate… just set the desired RPM, rate, or time in the large ½" LED display by depressing the "up-down" pushbuttons, one digit at a time or fast sweep. The OMDC-ASP10 settings are exact and repeatable. It will precisely control speed to a remarkable ±½ RPM of set speed, long term. The panel mount unit is easy to install into a standard ¹⁄8 DIN cutout. All wiring connects directly to a rugged screw type terminal strip through the easy access rear panel.

SPECIFICATIONS
Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: 85 to 265 Vac
Input Frequency: 50 to 60 Hz
Transducer Signal Input: 0-5 to 0-24 Vdc
On-Board Power Supply: 5 Vdc, 50 mA for external sensors
Cutout: 92 W x 45 mm H (3.62 x 1.77")
Dimensions: 115 W x 58 H x 117 mm D (4.54 x 2.29 x 4.63")

(Specify Model Number)

Part Number/Desc.

Qty

Description

OMDC-ASP10

SGD1,797.55

Availability: 5 weeks

Digital closed loop controller for ac/dc speed control

OMDC-ASP20

Consult Sales

Availability:

Digital closed loop PID controller for ac/dc speed control

OMDC-PU-40E

SGD510.24

Availability: 1 week

Shaft mounted pick-up sensor, 20 pulses per revolution

OMDC-PU-2E

SGD475.00

Availability: 1 week

Shaft mounted pick-up sensor, 1 pulse per revolution

Accessory Products

OMPMDC1-18-180V-56C

SGD1,450.00

Availability: 5 weeks

1 HP DC motor, 180V, TEFC enclosure

WTL-SNB24D4

SGD224.57

Availability: 5 weeks

24 Vac/dc 1 tier surface mount stacklight, Red incandescent steady light module

FTB372

SGD1,665.62

Availability: 4 weeks

1" NPT water turbine, max flow 158 LPM (41.6 GPM), 5 to 24 Vdc NPN open collector output ( hall effect)

† All prices on this site are shown in Singapore Dollars.
Note: Comes complete with operator’s manual.
Ordering Example: (1) OMDC-ASP10 Digital closed loop speed controller, SGD1,797.55 plus (1) OMDC-PU-2E Pick-up sensor (1 pulse/revolution), SGD475.00, SGD1,797.55 + 475.00 = SGD2,272.55

Related Products:

OMDC-PU-E Series