pH, ORP and Conductivity Controller and Transmitter

PHUCN601, PHUCN610, PHUTX601

See All Models Below

PLACE ORDER

For pH, ORP, Conductivity/Resistivity
1/4 DIN, NEMA 4X, Polycarbonate Enclosure
User-Friendly Design with Interior LCD Menu
Easy to Read with Large, Bright LED Display
Quick and Easy to Calibrate
Reduces Chemical Consumption with Cycle Timed Relays on Controllers
Two Control Relays with Third Relay for High/Low Alarm on Controllers

Industrial pH Instrumentation and Electrodes - View related products

Description

The PHUCN600 Series multi-parameter controller is a microprocessor-based controller capable of measuring one of the following parameters, pH, ORP, or conductivity.
When shipped from the factory, the PHUCN600 Series is not set to measure any one parameter.When the PHUCN600 Series is powered up for the first time, it will display the meter selection screen where the meter type must be selected. This meter selection screen will only be displayed when the PHUCN600 Series is powered up for the first time.
After the user selects a meter type the PHUCN600 Series will remain set to that meter type until it is changed with the meter selection menu function in the Utilities menu.
To return the PHUCN600 Series to its factory settings, the user must re-select the current meter type from the meter selection menu function. This will override all set-points and return all settings back to the factory settings. The PHUCN600 Series User’s menu has been divided into five main categories:

Calibration, used to calibrate the PHUCN600 Series with the selected sensor
Utilities, used to manually control or override the outputs
Setup, used to configure the PHUCN600 Series many options
Diagnostics, used to troubleshoot any problems
Outputs, used to configure the PHUCN600 Series outputs.

There are two displays on the PHUCN600 Series. A bright LED numeric display with bar graph on the outside front panel, and a 2-line, 16-character LCD display on the inside. The LED readout on the outside panel can be seen several yards away. The distinctive, Color coded bar graph will immediately indicate if you are within the process parameters that you set (green), if the control relays are on (yellow) and if you are in alarm condition (red). This makes diagnosing pump and alarm malfunctions easy. All configuration and control functions are performed on the LCD menu on the inside front panel.
A universal mounting kit is included for surface, panel and pipemount applications. The 1/4" DIN enclosure makes panel-mount cutouts and engineering simple.
Complete and versatile the PHUTX600 is the 1/4 DIN two wire transmitter which can measure Conductivity, pH or ORP. PHUTX600 comes complete with a universal mounting kit for surface, panel and pipe-mount applications. The NEMA 4X 1/4 DIN enclosure is perfect for stand-alone or panel-mount operation.
PHUCN600 and PHUTX600 Series are packaged in a rugged NEMA 4X polycarbonate enclosure making it ideally suited for heavy-duty applications such as industrial wastewater neutralization, municipal water and wastewater, pulp and paper, and process control.

The PHE-600-SB Salt Bridge kit required for use of the pH and ORE sensors is sold separately. pH and ORE sensors can not be used without the Salt Bridge kit.

(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.

Qty

Description

Controllers

PHUCN601

Consult Sales

Availability:

120 Vac pH/ORP conductivity

PHUCN610

Consult Sales

Availability:

240 Vac pH/ORPconductivity

Transmitter

PHUTX601

Consult Sales

Availability:

Transmitter pH/ORP conductivity

Electrodes with 1 1/2 NPT, 4.6 m (15') 5 conductor shielded cable, -5 to 95°C (23 to 203 °F)

PHE-600

Consult Sales

Availability:

1 1/2 NPT differential pH electrode, PPS sensor body 180 mm (7.1") long 55 mm (2.14") diameter

ORE-600

SGD1,350.00

Availability: 1 week

1 1/2 NPT differential ORP electrode, PPS sensor body 180 mm (7.1") long 55 mm (2.14") diameter

Electrodes with 1 1/4" compression fitting for variable insertion, 4.6 m (15') 5 conductor shielded cable, -5 to 95°C Wetted materials: CPVC PVDF glass titanium palladiam alloy and EPDM (platinum for ORP probe) psig max: 6.9 bar (100 psig)

PHE-610

SGD1,535.00

Availability: 1 week

Compression fitting pH electrode for 7/8" to 5" variable insertion, 229 mm (9") long, 28 mm (1.125") diameter

ORE-610

SGD1,395.00

Availability: 9 weeks

Compression fitting ORP electrode for 7/8" to 5" variable insertion

PHE-620

SGD1,535.00

Availability: 5 weeks

Hot tap pH electrode for extended lengths 7/8" to 6" variable insertion

ORE-620

SGD1,505.00

Availability: 9 weeks

Hot tap ORP electrode for extended lengths 7/8" to 6" variable insertion

Conductivity cells with 3/4 MNPT CPVC compression fitting, auto. temp. Compensation: 0 to 100°C (32 to 212°F). Wetted materials:Graphite, epoxy, EPDM,& CPVC Max. Press/Temp: 50 psi @60°C, 100 psi @ 50°C, 150 psi @ 20°C cable length: 6.10 m (20')

CDE-600-001

SGD710.00

Availability: 5 weeks

0.01 cell constant 0 to 2 µS/cm and 0 to 19.99 MΩ/cm epoxy low temp cond probe

CDE-600-01

SGD465.00

Availability: 5 weeks

0.1 cell constant 0 to 20 & 0 to 200 µS/cm epoxy low temp cond probe

CDE-600-1

SGD465.00

Availability: 1 week

1 cell constant 0 to 2000 µS/cm epoxy low temp cond probe

CDE-600-10

SGD465.00

Availability: 5 weeks

10 cell constant 0 to 20 mS/cm epoxy low temp cond probe

CDE-600-50

SGD510.00

Availability: 5 weeks

50 constant 0 to 200 mS/cm epoxy low temp cond probe

Conductivity cells with 3/4 MNPT 316SS compression fitting, auto. temp. Compensation: 0 to 100°C (32 to 212°F). Wetted materials: Graphite, epoxy, polypropylene, & 316SS Max. Press/Temp: 250psi @ 120°C cable length: 6.10 m (20')

CDE-610-001

SGD875.00

Availability: 5 weeks

0.01 cell constant 0 to 2 µS/cm & 0 to 19.99 MΩ/cm epoxy high temp cond probe

CDE-610-01

SGD694.78

Availability: 1 week

0.1 cell constant 0 to 20 and 0 to 200 µS/cm epoxy high temp cond probe

CDE-610-1

SGD694.78

Availability: 1 week

1 cell constant 0 to 2000 µS/cm epoxy high temp cond probe

CDE-610-10

SGD665.00

Availability: 5 weeks

10 cell constant 0 to 20 mS/cm epoxy high temp cond probe

CDE-610-50

SGD710.00

Availability: 5 weeks

50 cell constant 0 to 200 mS/cm epoxy high temp cond probe

Required for Use of pH and ORE Sensors

PHE-600-SB

SGD369.00

Availability: 5 weeks

† Salt Bridge kit kit with PVDF outer junction (3 pack) for required for use with PHE/ORE-600 Series sensors

PHE-612-SB

SGD369.00

Availability: 1 week

† Salt Bridge kit with PVDF outer junction (3 pack) for PHE/ORE-610/620 Series sensors

pH Accessories

PHE-600-C-(*)

Consult Sales

Availability:

$3.00/foot Interconnect cable for PHE/ORE-600 Series

PHE-600-EP

SGD369.00

Availability: 5 weeks

Electrode protector

PHE-600-JB

SGD252.00

Availability: 5 weeks

Junction box with integrated terminal strip.

PHE-610-EP

Consult Sales

Availability:

Electrode protector for PHE/ORE-610/620

PHE-620-BVA

Consult Sales

Availability:

PVC hot tap ball valve assembly

PHA-10

SGD33.23

Availability: 1 week

pH 10 buffer solution 500 ml (1 pt)

PHA-10-GAL

SGD83.74

Availability: 1 week

pH 10 buffer solution 4L (1 gal)

PHA-4

SGD28.94

Availability: 1 week

pH 4 buffer solution 500 ml (1 pt)

PHA-4-GAL

SGD79.26

Availability: 1 week

pH 4 buffer solution 4 L (1 gal)

PHA-7

SGD28.94

Availability: 1 week

pH 7 buffer solution 500 ml (1 pt)

PHA-7-GAL

SGD79.26

Availability: 1 week

pH 7 buffer solution 4 L (1 gal)

PHA-DI

SGD37.22

Availability: 1 week

De-ionized water 500 ml (1 pt)

PHA-DI-GAL

SGD93.04

Availability: 1 week

De-ionized water 4 L (1 gal)

PHAB-DI

SGD81.00

Availability: 3 weeks

20 single use foil packets of de-ionized water

PHAB-PH

SGD85.07

Availability: 1 week

5 each single use foil packets of pH-4, pH-7, pH-10, and de-ionized water

† All prices on this site are shown in Singapore Dollars.
Note: Comes complete with operators manual.

* Insert cable length in feet.

†The PHE-600-SB Salt Bridge kit required for use of the pH and ORE sensors is sold separately. pH and ORE sensors can not be used without the Salt Bridge kit.