The RCK-23 and RCK-24 series has been discontinued. Please contact our Flow Engineering department for a viable replacement.
Different from 3D gyration motion, the RCK-23 and RCK-24
use a see-saw motion to create wave-like mixing process.
These rockers are suitable for mixing various flat bottles,
such as culture flasks, petri dishes etc.
With smaller footprint, but the high driving force, more
platforms can be added by stacking two more platforms
to accommodate more samples.
There are two models for this type of the rocker, both are
microprocessor controlled. The digital model (RCK-23)
provides digital timer with up to 9 hours setting and speed
control in 1 RPM increment. The RCK-24 model provides
2 hours timers (in 10 minute integral) and 10 steps speed
control without digital display.
Specifications Speed Range: 5 to 70 rpm Rocking Type: See-saw, wave Platform Dimensions: 235 x 235 mm (9.25 x 9.25") Tilting Angle: 7° Angle Adjustable: No, fixed at 7° Timer RCK-24: 120 minutes RCK-23: Digital, 540 minutes Speed Control Mode RCK-24: 10 integral selection RCK-23: Digital, 540 rpm Maximum Load: 10 kg (22.04 lb) Dimensions: 240 W x 300 D x 180 H mm (9.4 x 11.8 x 7.0") Operation Temperature Range: 4 to 40°C (39.2 to 104°F) Maximum Operation Humidity: 80% Weight: 6 kg (13 lb) Power Supply: 230V, 50 Hz, 50 W
† All prices on this site are shown in Malaysian Ringgit. Note: Comes complete with operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.