DiscontinuedPneumatic Solenoid Valve Islands

VM10 Series Directional Control Valves

See All Models Below

Commom Valve Configurations in Stock with Blank Valve Stations for Future Expansion
Custom Made to Order Configurations also Available
NEMA 4 (IP65) Rated Protection
Trun-to-Lock Manual Override
Din Rail or Panel Mount
Requires Air Filtration of 40 Micron or Better
Operates Under Air Pressure of up to 8 bar (116 psi)
Temperature Range of -5 to 50°C (23 to 122°F)

Description

The VM10 series Valve Islands have been discontinued, we currently do not have a replacement product.

The VM10 Series valve islands are stocked in common configurations and are available in 2- or 4-way directional control valves. These valves are well suited for operation with PLC’s with low power consumption. The VM10 valve islands provide high flow for a compact valve bank, 0.44 Cv from the 4-way directional (5/2) control valve. All valve islands share a common supply and exhaust channel. Electrical connections are made easy with 25 or 44 pin D-sub cable connections.

Made-to-order valve islands are available which may include mixed valve types, dual pressure supply, different or multiple tubing connections, internal/ external piloting, or a pneumapole (quick disconnect) base with bottom or side tubing connections for panel mount or through enclosure mounting applications.

The 2-way (2 x 3/2) style valve contains two independent 2-way valves (3/2) per valve slice. The 4-way (5/2) style valve is known as a 4-way directional control valve, for controlling double-acting pneumatic cylinders. These valves banks are normally closed, internally piloted solenoid valves that share common ports.

SPECIFICATIONS
Electrical: 24 Vdc, 0.6 W per solenoid with LED indication, tolerance ±10% Surge Suppression: Flywheel diode
Electrical Communication: Negative common, 25 or 44 pin D-sub connector
Actuation Time: 14 miliseconds
Medium: Compressed air, filtered, lubricated or non-lubricated
Port Sizes, PIF (Push-in-Fittings): Stock valves 1/4, available in 1/8, 5/32, and 1/4", 3, 4, and 6 mm
Operating Temperature: -20 to 50°C (-4 to 122°F)
Operating Pressure:
Internal pilot 3 to 8 bar (43.5 to 116 psig)
external pilot 28” Hg to 116 psig
Air Flow: 5/2 valves 430 l/min (Cv 0.44); 2 x 3/2 valves 350 l/min (Cv 0.36)
Materials: Body and End Plates: Engineered PPA co-polymer
Valves: Aluminum with nitrile rubber seals
Tubing Requirements: Polyurethane (85-95D hardness) or nylon 11 or 12

A data sheet is available on our FTP site with additional information.

(Specify Model Number)

Part Number/Desc.

Qty

Description

OM-AIR-VM105214

Consult Sales

Availability:

Spare valve slice for expansion, 5/2 4-way control valve, NC

OM-AIR-VM103214

Consult Sales

Availability:

Spare valve slice for expansion, 2x3/2 2-way control valve, NC. Two independant valves per slice.

Accessories

OM-AIR-V11570-E01

Consult Sales

Availability:

44-pin D sub connector, 1 M (3.28') in length

OM-AIR-V11570-E03

Consult Sales

Availability:

44-pin D sub connector, 3 M (9.84') in length

† All prices on this site are shown in Singapore Dollars.
Note: Pre-configured valve stations include as standard a left hand feed, right side blocked 5/16 port end plate.
Comes with optional DIN rail mount kit, and equipped with 2 X 3/2 double valve solenoids. Multipole sub-connector for easy connection and hookup are also standard. Two open stations for expansion flexibility are included on each island. Does NOT include a pneumapole base with valve stations.