Discontinued - Positive Displacement Flowmeters

FPD2000 Series

Positive Displacement Flowmeters

See All Models Below

PLACE ORDER

Accuracy ±0.5% of Reading
Includes 3-point NIST certificate
Aluminum, 303 or 316 SS Bodies
Pressure Rating Up to 345 bar (5000 psi)
Pulse or mA Outputs Available
Bi-Directional Flow Capabilities
Economical Cost

Turbine, Paddle Wheel & Positive Displacement Flow Meters - View related products

Description

This product has been discontinued. Please contact sales for the best alternative product

The FPD2000 Series represents a positive displacement meter that is affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. This reliability, coupled with a large turndown range, offers an affordable replacement for older turbine technology. The meter’s solid construction and excellent dynamic response are well suited to the measurement of oil, grease, fuel, solvents, polyurethanes, brake fluid, skydrol as well as other nonabrasive lubricating fluids. Since there is no need for straight run piping upstream or downstream of the flow meter, the FPD2000 flow meters are simple to use and to install. The meters produce good resolution and high accuracy at low flow rates. Flow may be bidirectional, such as for cylinder position measurements, without damage to internal parts.

SPECIFICATIONS
Accuracy: ±0.5% over 10:1 turndown with 30cP fluid
Repeatability: ±0.1%
Max Fluid Temperature:
    Aluminum Body: Meter 85°C (185°F)
    Stainless Body: Meter 204°C (400°F)
Pressure Maximum: 345 bar (5000 psi)
Wetted Materials
Body:
    FPD2000 Series: Aluminum
    FPD2010 Series: 303 stainless steel
    FPD2020 Series: 316 stainless steel
Gear: Stainless steel
O-Ring: PTFE, FKM (optional)
Bearings: Stainless steel
Outputs
Temperature Range (Electronics):
    Standard Aluminum and Stainless Steel versions: -40 to 85°C (-40 to 185°F)
Square Wave: (Basic unit)
Supply Voltage: +10 to 28 Vdc
Supply Current: 8 mA @ 12 Vdc, 12 mA @ 24 Vdc
Duty Signal: 50% ±15%
Minimum Signal: 0.5 Hz
Frequency: Flow dependent, up to 2000 Hz
Driving Capacity: 50 mA max resistive load
Output Impedance: 40Ω - analog switch and self-resetting fuse
Analog Output (-A Models)
Supply Voltage: 10 to 30 Vdc
Output: 4 to 20 mA
Input: 0.25 Hz to 5 KHz
Amplitude: 1 Vp-p to 40 Vp-p
Update Time: 1/F + 25 msec
Linearity: ±0.01% of reading
Enclosure Rating: IP54

Model No.	Pulses/Liter (Pulses/Gallon)	Body Dia cm (inch)	*Body Heightcm cm (inch)	Filtration (microns)
FPD20X1	14,000 (53,000)	7.6 (3)	8.6 (3.4)	30
FPD20X2	4200 (15,900)	8.4 (3.3)	8.6 (3.4)	30
FPD20X3	1700 (6600)	8.4 (3.3)	8.6 (3.4)	30
FPD20X4	470 (1800)	12.4 (4.9)	13.8 (5.45)	30
FPD20X5	420 (1600)	21.3 (8.4)	17 (6.7)	200

(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.

Qty

Description

ALUMINUM GEAR METERS WITH PULSE OUTPUT

FPD2001

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.01 to 3 LPM (0.003 to 0.8 GPM) Range

FPD2002

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.04 to 7.5 LPM (0.01 to 2 GPM) Range

FPD2003

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/2 NPT, 0.11 to 26.4 LPM (0.03 to 7 GPM) Range

FPD2004

PHP136,600.00

Availability: 1 week

This product has been discontinued. Please contact sales for the best alternative product
3/4 NPT, 0.19 to 75 LPM (0.05 to 20 GPM) Range

FPD2005

PHP253,365.00

Availability: 1 week

This product has been discontinued. Please contact sales for the best alternative product
1¼ NPT, 1.9 to 227 LPM (0.5 to 60 GPM) Range

ALUMINUM GEAR METERS WITH 4 TO 20 mA OUTPUT

FPD2001-A

PHP137,185.00

Availability: 1 week

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.01 to 3 LPM (0.003 to 0.8 GPM) Range

FPD2002-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.04 to 7.5 LPM (0.01 to 2 GPM) Range

FPD2003-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/2 NPT, 0.11 to 26.4 LPM (0.03 to 7 GPM) Range

FPD2004-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
3/4 NPT, 0.19 to 75 LPM (0.05 to 20 GPM) Range

FPD2005-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1¼ NPT, 1.9 to 227 LPM (0.5 to 60 GPM) Range

303 SS GEAR METERS WITH PULSE OUTPUT

FPD2011

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.01 to 3 LPM (0.003 to 0.8 GPM) Range

FPD2012

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.04 to 7.5 LPM (0.01 to 2 GPM) Range

FPD2013

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/2 NPT, 0.11 to 26.4 LPM (0.03 to 7 GPM) Range

FPD2014

PHP190,185.00

Availability: 1 week

This product has been discontinued. Please contact sales for the best alternative product
3/4 NPT, 0.19 to 75 LPM (0.05 to 20 GPM) Range

FPD2015

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1¼ NPT, 1.9 to 227 LPM (0.5 to 60 GPM) Range

303 SS GEAR METERS WITH PULSE OUTPUT AND OPTIONAL (-HT) FOR HIGH TEMPERATURE

FPD2011-HT

PHP159,820.00

Availability: 1 week

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.01 to 3 LPM (0.003 to 0.8 GPM) Range

FPD2012-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.04 to 7.5 LPM (0.01 to 2 GPM) Range

FPD2013-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/2 NPT, 0.11 to 26.4 LPM (0.03 to 7 GPM) Range

FPD2014-HT

PHP192,815.00

Availability: 1 week

This product has been discontinued. Please contact sales for the best alternative product
3/4 NPT, 0.19 to 75 LPM (0.05 to 20 GPM) Range

FPD2015-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1¼ NPT, 1.9 to 227 LPM (0.5 to 60 GPM) Range

303 SS GEAR METERS WITH 4 TO 20 mA OUTPUT

FPD2011-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.01 to 3 LPM (0.003 to 0.8 GPM) Range

FPD2012-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.04 to 7.5 LPM (0.01 to 2 GPM) Range

FPD2013-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/2 NPT, 0.11 to 26.4 LPM (0.03 to 7 GPM) Range

FPD2014-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
3/4 NPT, 0.19 to 75 LPM (0.05 to 20 GPM) Range

FPD2015-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1¼ NPT, 1.9 to 227 LPM (0.5 to 60 GPM) Range

303 SS GEAR METERS WITH 4 TO 20 mA OUTPUT AND OPTIONAL (-HT) HIGH TEMPERATURE

FPD2011-A-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.01 to 3 LPM (0.003 to 0.8 GPM) Range

FPD2012-A-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.04 to 7.5 LPM (0.01 to 2 GPM) Range

FPD2013-A-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/2 NPT, 0.11 to 26.4 LPM (0.03 to 7 GPM) Range

FPD2014-A-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
3/4 NPT, 0.19 to 75 LPM (0.05 to 20 GPM) Range

FPD2015-A-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1¼ NPT, 1.9 to 227 LPM (0.5 to 60 GPM) Range

316 SS GEAR METERS WITH PULSE OUTPUT

FPD2021

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.01 to 3 LPM (0.003 to 0.8 GPM) Range

FPD2022

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.04 to 7.5 LPM (0.01 to 2 GPM) Range

FPD2023

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/2 NPT, 0.11 to 26.4 LPM (0.03 to 7 GPM) Range

FPD2024

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
3/4 NPT, 0.19 to 75 LPM (0.05 to 20 GPM) Range

316 SS GEAR METERS WITH PULSE OUTPUT AND OPTIONAL -HT FOR HIGH TEMPERATURE

FPD2021-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.01 to 3 LPM (0.003 to 0.8 GPM) Range

FPD2022-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.04 to 7.5 LPM (0.01 to 2 GPM) Range

FPD2023-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/2 NPT, 0.11 to 26.4 LPM (0.03 to 7 GPM) Range

FPD2024-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
3/4 NPT, 0.19 to 75 LPM (0.05 to 20 GPM) Range

316 SS GEAR METERS WITH 4 TO 20 mA OUTPUT

FPD2021-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.01 to 3 LPM (0.003 to 0.8 GPM) Range

FPD2022-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.04 to 7.5 LPM (0.01 to 2 GPM) Range

FPD2023-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/2 NPT, 0.11 to 26.4 LPM (0.03 to 7 GPM) Range

FPD2024-A

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
3/4 NPT, 0.19 to 75 LPM (0.05 to 20 GPM) Range

316 SS GEAR METERS WITH 4 TO 20 mA OUTPUT AND OPTIONAL -HT FOR HIGH TEMPERATURE

FPD2021-A-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.01 to 3 LPM (0.003 to 0.8 GPM) Range

FPD2022-A-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/4 NPT, 0.04 to 7.5 LPM (0.01 to 2 GPM) Range

FPD2023-A-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
1/2 NPT, 0.11 to 26.4 LPM (0.03 to 7 GPM) Range

FPD2024-A-HT

Consult Sales

Availability:

This product has been discontinued. Please contact sales for the best alternative product
3/4 NPT, 0.19 to 75 LPM (0.05 to 20 GPM) Range

Accessories

DPF701

Consult Sales

Availability:

Pulse input 6-digit panel meter for rate or total

FPD2000-CONNECTOR

PHP4,325.00

Availability: 4 weeks

This product has been discontinued. Please contact sales for the best alternative product
6-pin connector for the FPD2000 Series with pulse output (Assembly and wire required)

FPD2000A-CONNECTOR

PHP4,713.50

Availability: 1 week

This product has been discontinued. Please contact sales for the best alternative product
3-pin connector for the FPD2000-A Series with 4-20 mA output (Assembly and wire required)

† All prices on this site are shown in Philippine Pesos.
Note: Comes complete with operator's manual, connector, and K-Factor certificate,

Certificate does not include points and is not a NIST cert.

FPD2000, pulse output models come complete with the 6-pin FPD2000-CONNECTOR (Assembly and hook-up wire required).

FPD2000-A, 4-20 mA output models come complete with the 3-pin FPD2000A-CONNECTOR (Assembly and hook-up wire required).

Ordering Example: (1) FPD2001 Aluminum gear meter with pulse output, 1/4 NPT connections and 0.003 to 0.8 GPM range, PHP127,940.00

	(1)	(2)	(3)
FPD20

Option Descriptions:

(1) Model & Range LPM (GPM) select from:
01 for Aluminum gear meter range 0.01 to 3 (0.003 to 0.8)
02 for Aluminum gear meter range 0.04 to 7.5 (0.01 to 2)
03 for Aluminum gear meter range 0.11 to 26.4 (0.03 to 7)
04 for Aluminum gear meter range 0.19 to 75 (0.05 to 20)
05 for Aluminum gear meter range 1.9 to 227 (0.5 to 60)
11 for 303 SS gear meter range 0.01 to 3 (0.003 to 0.8)
12 for 303 SS gear meter range 0.04 to 7.5 (0.01 to 2)
13 for 303 SS gear meter range 0.11 to 26.4 (0.03 to 7)
14 for 303 SS gear meter range 0.19 to 75 (0.05 to 20)
15 for 303 SS gear meter range 1.9 to 227 (0.5 to 60)
21 for 316 SS gear meter range 0.01 to 3 (0.003 to 0.8)
22 for 316 SS gear meter range 0.04 to 7.5 (0.01 to 2)
23 for 316 SS gear meter range 0.11 to 26.4 (0.03 to 7)
24 for 316 SS gear meter range 0.19 to 75 (0.05 to 20)

(2) Output select from:
Nothing(leave field blank) for Pulse output
-A for 4 to 20 mA output

(3) Additional Option select from:
Nothing(leave field blank) for None
-HT for High Temperature option on stainless steel models

Note: All combinations may not be valid, check spec sheet for valid part numbers.