2-way Pilot Operated Solenoid Valve for Water, Hydraulic Oil and Air - Discontinued

FSV-40

2-way Pilot Operated Solenoid Valve (1/4 to 2

See All Models Below

PLACE ORDER

100% Duty Cycle for Normally Closed Valves
Low Lead Brass Body
¼ to 2" Sizes
Available Normally Closed or Normally Open

Description

The FSV40 series has been discontinued. Please see the SV4000A as a possible alternative or contact our Flow Engineering department.

The FSV40 series solenoid valves come in sizes from 1/4" to 2", normally closed or normally open. All are supplied standard with a strain relief electrical conductor for 2-wire plus ground 18 gage cable.

SPECIFICATIONS
Media Temperature: -10 to 90°C (14 to 194°F)
Max Pressure (NC and NO versions):
   FSV41-45: 232 psig
   FSV44-48: 232 psig
Body Material:Low-lead brass (2%)
Seal Material: NBR (Buna)
Other Wetted Materials: AISI 430F SS (NO operator's tube in brass)
Power: 115 Vac, 50/60 Hz
Power Consumption:
   FSV41-45: 9 VA holding, 14 VA inrush
   FSV46-48: 15 VA holding, 30 VA inrush
Protection Class: NEMA 3 (IP64) with connector

(Specify Model Number)

Part Number/Desc.

Qty

Description

Normally Closed with 100% Duty Cycle Rating

FSV41

Consult Sales

Availability:

1/2" Orifice, 1.8 CV Flow Rate

FSV47

PHP28,390.00

Availability: 1 week

1 1/2" Orifice, 33.3 CV Flow Rate

Normally Open with 50% Duty Cycle Rating

FSV47-NO

Consult Sales

Availability:

1 1/2" Orifice, 33.3 CV Flow Rate

† All prices on this site are shown in Philippine Pesos.
Note: Comes complete with strain relief electrical connector for 2-wire plus ground 18 gage cable and operator's manual.

The FSV40 series solenoid valves come in sizes from 1 / 4 to 2", normally closed or normally open.