See All Models Below
Description
The OM-DAQPRO-5300 series has been discontinued. Please check the new OM-CP-OCTPRO as an upgraded replacement.
INPUTS
Number of Inputs: 8 differential
analog inputs Input Type: Selectable type for each input; 0 to 24 mA, 0 to 50 mV, 0 to 10 V, 2252 Ω or 10 K Ω thermistor, PT100 RTD, J, K or T thermocouple, pulse and frequency (input 1 only) 0 to 24 mA Range: 0 to 24 mA Resolution: 4.76 µA Accuracy: ±0.5% FS Loop Impedance: 21 Ω 0 to 50 mV Range: 0 to 50 mV Resolution: 3 µV Accuracy: ±0.5% FS Input Impedance: 50 M Ω 0 to 10 V Range: 0 to 10V Resolution: 200 µV Accuracy: ±0.5% FS Input Impedance: 125 K Ω TEMPERATURE THERMISTOR Thermistor Type: 2252 Ω/10 K Ω Thermistor, (OMEGA 44000 Series) Range: -25 to 150°C (-13 to 302°F) Resolution: 0.05°C Accuracy: ±0.5% FS TEMPERATURE PT100 RTD RTD Type: 100 Ω Pt RTD, alpha =0.00385 Range: -200 to 400°C (-328 to 752 °F) Resolution: 0.1°C (7 m Ω) Accuracy: -200 to -50°C, ±0.5% of reading; 50 to 400°C, ±0.5% of reading; -50 to 50°C, ±0.5°C No. of RTD Inputs: up to eight PT100 2-wire channels or four PT100 3-wire channels INTERNAL TEMPERATURE Range: -25 to 70°C (-13 to 158°F) Resolution: 0.1°C (1 µV) Accuracy: ±0.5°C PULSE COUNTER (INPUT 1 ONLY) OPTOCOUPLER INPUT Range: 0 to 65000 counts Resolution: 1 count Input Signal: 0 to 5 V Input Impedance: 470 Ω Bandwidth: 0 to 25 Hz |
FREQUENCY METER (INPUT 1 ONLY) OPTOCOUPLER INPUT Range: 20 to 4000 Hz Time Resolution: 6.5 µs Input Signal: 0 to 5 V Input Impedance: 470 Ω GENERAL A/D SPECIFICATIONS Noise: 30 µV RMS Internal Linearity Error: ±0.08% of FSR Offset Error: 0.1% OPEN COLLECTOR ALARM OUTPUT (OUTPUT 8) Maximum Current Sink: 50 mA @5 Vdc (fuse protected) Input impedance: 50 Ω COMMUNICATION USB 1.1 compliant SAMPLING Capacity: 512 KB (512,000 samples total) Analog Sampling Rate: The number of sensors in use limits the maximum sampling rate; 1. Maximum sampling rate with one sensor is 4000 samples/sec 2. Maximum Temperature sampling rate 1 sample/sec 3. Maximum sampling rate with two sensors or more is 1 sample/sec 4. Maximum sampling rate with two PT 100 RTD sensors or more is every 10 seconds 5. Maximum sampling rate with five sensors or more and at least one is thermistor or thermocouple (J, K or T) is every 10 seconds 6. Maximum sampling rate with seven sensors or more is every 10 seconds 7. Maximum sampling rate with eight PT 100 RTD sensors or more is every 10 seconds 8. Datalogger displays readings in real time at rates up to 1 sample/sec 9. Datalogger software displays online readings at rates up to 1 sample/sec Analog Sampling Resolution: 16-bits MAN MACHINE INTERFACE Keyboard: full keyboard operation - enables manual programming of the datalogger Display: graphic LCD 64 x 128 pixels POWER SUPPLY Power: internal rechargeable 7.2 V Ni-MH battery, built in battery charger, external 9 to 12 Vdc input via included ac adaptor Battery Life: 25 hrs between charges OPERATING TEMPERATURE Operating Temperature Range: 0 to 50°C (32 to 122°F) MECHANICAL Enclosure: ABS plastic Dimensions: 182 H x 100 W x 28 mm D (7.17 x 3.94 x 1.10") Weight: 450 g (1.0 lb) STANDARDS COMPLIANCE CE, FCC |