Toll-Free in Philippines: 1 800 8908 8267 | 1 800 1441 0877
International+65 6415 5353

Digital Tachometer


Digital Tachometer | OMDC-DM8000

Digital Tachometer

PHP37,235.00 OMDC-DM8000

  • Four Devices in One: Tachometer, Counter, Totalizer, and Zero Speed Switch
  • Selectable Alarm Relay Output
  • Control Modes are Selectable Between Rate, Time, and Counter
  • User Inputs Allow for Special Functions: Counter Reset, Counter Gate, and Alarm Display
  • Sensor Input Voltage Range: 5 VDC to 24 VDC
  • 5 VDC (50 mA) Sensor Power Supply Provided
  • Non-Volatile Memory for Storage of Custom Settings
  • Universal AC Input Voltage from 85 to 265 Vac
  • NEMA 4X Rating
Drives & Motors - View related products


The OMDC-DM8000 is an economical microprocessor-based digital tachometer system capable of measuring shaft speeds lower than 1 RPM. With an on-board microcomputer coupled with sophisticated internal software and a quartz crystal controlled reference frequency, the OMDC-DM8000 is able to maintain accuracy of ±0.04%, even if the shaft is uneven. The OMDC-DM8000 is field programmable through the easy-to-use frontpanel interface and can be configured to display any desired unit of measure. Large 13 mm (½") 4-digit LED display numbers allow viewing under the most adverse conditions.

The isolated 5 amp form C relay output can be configured for many different alarming conditions. Designed to use a variety of inputs, including the hall-effect solid state OMDC-PU-E Series pick-up, the system delivers trouble free operation at an economical cost. The OMDC-DM8000 offers the same enhanced display options and capabilities featured in our other digital control products, as well as the universal power supply and rugged european-style terminal strip.

The OMDC-DM8000 can be used in process applications for monitoring speeds and rates, or counting discrete input signals. Process applications using counting may be batching, filling, mixing, punching, cutting, drilling, diverting, or alarming. While process applications using speed or rate monitoring may be conveyors, conveyor ovens, material flow, rotational rpm, and testing.

Line Input
Any voltage from 85 to 265 Vac
    Frequency: Any freq from 48 to 62 Hz
Signal Input Frequency Range: 0 to 100,000 pulses per minute (higher frequencies are possible when using internal frequency divisor)
Resolution: From 0.01 RPM
Accuracy: ±0.04% display update every pulse or 0.5 seconds, whichever is longer Isolated High/Low Alarm Output: 5 A, 230 Vac
Settable Alarm Range: 0 to 9999
Transducer Signal Input: 0 to 5 to 0 to 24 Vdc
Display Range: 0.001 to 99,990
Units of Operation: User programmable, any unit sensor/pickup
Power Supply: 5V @ 50 mA Isolated Alarm Relay Output Ratings: 240 Vac @ 5A MECHANICAL
Display Type: LED, red, 4 digit, 13 mm (½") H Housing Type (With Supplied Gasket in
NEMA 4X Panel): NEMA 4X Connector Style (Pluggable Connector
Optional): 12-position 5 mm european-style Terminal Block Torque Setting: 4.4 in-lb max or 0.5 N-M
Faceplate Material: Polycarbonate with polycarbonate overlay
Housing Material: Aluminum
Length (Panel Depth): 117.5 mm (4.6")
Width: 115.3 mm (4.5")
Weight: 382 g (13.5 oz) ENVIRONMENTAL
Operating Temperature Range: -10 to 45ºC (15 to 115ºF)
Operating Humidity Range: 95%, non-condensing
(Specify Model Number)
Part Number/Desc.
Availability: 5 weeks
Digital tachometer with alarm relay output
Availability: 1 week
Digital tachometer with 2 alarm relay outputs
Availability: 1 week
Shaft-mounted NPN pickup sensor, 10 pulses per revolution
Availability: 5 weeks
Shaft-mounted NPN pickup sensor, 20 pulses per revolution
Consult Sales  
Shaft-mounted NPN quadrature pickup sensor, 10 pulses per revolution
All prices on this site are shown in Philippine Pesos.
Note: Comes with operator's manual.
Ordering Example: (1) OMDC-DM8000 Digital tachometer with alarm relay output, PHP37,235.00
We noticed you are from the US. Visit your local site for regional offers and live support.