Toll-Free in Philippines: 1 800 8908 8267 | 1 800 1441 0877
International+65 6415 5353

Self-Adhesive Patch Sensors

SA2F-TH and SA2C-TH Series

Self-Adhesive Patch Sensors | SA2F-TH and SA2C-TH Series

Self-Adhesive Patch Sensors

See All Models Below

  • 2252Ω, 5 kΩ or 10 kΩ 25°C (77°F) Elements
  • Accuracy ±0.1°C Between 0 and 70°C
  • Operating Range: -30 to 100°C (-22 to 212°F)
  • Self Adhesive Foil Backing for Faster Response Time
  • Resistant to a Variety of Chemicals and Oils
  • A Range of Cable Termination Options Available
  • 2 Styles Available for Flat (SA2F-) or Curved (SA2C-) Surfaces
Thermistor Elements, Probes and Assemblies - View related products

Description

These temperature sensors are available in two patch styles, for either curved or flat surfaces. The integral thermistor element is mounted flush with the self-adhesive surface of the patch, which is foil backed to minimize response times.
(Specify Model Number)
Part Number/Desc.
Qty
Description
SA2F-TH-44033-40
Consult Sales  
Availability: 
 
 
Resistance; 2252 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m (40"), stripped leads
SA2F-TH-44034-40
Consult Sales  
Availability: 
 
 
Resistance; 5000 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m (40"), stripped leads
SA2F-TH-44031-40
Consult Sales  
Availability: 
 
 
Resistance; 10,000 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m, (40"), stripped leads
SA2C-TH-44033-40
Consult Sales  
Availability: 
 
 
Resistance; 2252 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m (40"), stripped leads
SA2C-TH-44034-40
Consult Sales  
Availability: 
 
 
Resistance; 5000 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m (40"), stripped leads
SA2C-TH-44031-40
Consult Sales  
Availability: 
 
 
Resistance; 10,000 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m (40"), stripped leads
All prices on this site are shown in Philippine Pesos.
Note: Notes: For longer cable length, change “-40” with required length (in inches) to end of the model number for an additional cost per foot. For 1/4" jack plug, add “-PP” to the model number for an additional cost.

Option Descriptions:


(1) Mounting Type select from:
F for Flat Surface
C for Curved Surface

(2) Thermistor Selection select from:
44033 for 2252 ohms at 25C
44034 for 5000 ohms at 25C
44031 for 10000 ohms at 25C

(3) Lead Length select from:
40 for 40 inches
80 for 80 inches
120 for 120 inches
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.