Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Singapore: 1800 622 1156
International+65 6415 5353

Wall-Mount Programmable Temperature Controller

CN1511 Series

Wall Mount Temperature Controller | CN1511 Series

Wall Mount Temperature Controller

See All Models Below

  • Large, 7-Digit, 7-Segment LED Display 20 mm (0.8") H
  • Multiple Control Modes —On/Off, PID, Heat/Cool
  • 10-Segment Ramp/Soak Program
  • 5 Independent Ramp and Soak Programs
  • Programmable Control Parameters
  • Thermocouple, RTD, and Thermistor Temperature Inputs
  • Current, Voltage, and Millivolt Process Inputs
  • Scaling for Voltage, Current, and Millivolt Signals
  • 4 Programmable Process Alarms (Optional)
  • Relay or Solid State Outputs (Optional)
  • Built-In Buzzer to Sound Alarm (Optional)
  • 2 Programmable Timers (Optional)
  • Easy to View from a Distance
  • Protection from Dust and Moisture
Temperature and Process Controllers and Power Switching Devices - View related products

Description

Housed in a wall-mount, watertight plastic enclosure, the CN1511 is a flexible temperature controller that offers the ease of an on/off controller with the precision of a full-blown PID controller. For applications that do not require the complexity of PID control, this device can be programmed to work as simple on/off controller. Yet for processes that require close temperature conformity, the CN1511 can be run under full PID control, selectable for either heating (direct acting) or cooling (reverse acting).

The CN1511 accepts 5 different ramp and soak programs, each with up to 10 segments. Separate pass-codes are required for selecting or entering a ramp/soak program. This prevents operators from making any inadvertent changes. The manual hold feature allows for an indefinite hold anywhere along the ramp/soak profile. Also offered is a manual setpoint entry mode for a quick ramp-to-setpoint function. This eliminates the need to enter a complete ramp/soak program.

Maximum and minimum temperature readings are continuously tracked, and 4 optional process alarms are available. These are programmable over the entire range of the selected input type. They can be configured as latching or non-latching, normally open, or normally closed. There are also 2 optional timers that work independently or in conjunction with process limits (e.g., turning on a fan 10 minutes after limit 1 temperature is reached). The time function keeps track of process run time.

The CN1511 also functions as a rate monitor, indicating instantaneous as well as average rate of temperature change. A programmable time base allows the rate to be displayed in per second, minute, hour, or any other interval. The CN1511 can also be programmed for a rate alarm, which can indicate whether a predetermined rate is exceeded or not achieved.

Additional features include a built-in buzzer that sounds whenever a limit is reached (available with the relay option). Visual indication of relay output status is given by LEDs on the front panel. The CN1511 also has a power line filter, designed to provide trouble-free operation in harsh industrial environments.


SPECIFICATIONS
Input Type:
. J, K, T, E, R, S, B, thermistor
2252 . @ 25°C (77°F), Pt100 RTD
. 0 to 10 Vdc
. 4 to 20 mA loop current
. 0 to 100 mV
CJC Error: ±0.5°C @10 to 45°C
(±0.9°F @ 50 to 113°F)
Accuracy:
Resolution: 1°C/°F for T/Cs and
RTDs; 0.1°C/0.2°F for thermistors
Process: 9999, 999.9, 99.99, 9.999
Voltage: 0.05% FS
Current: 0.05% FS
A/D Conversion:
20,000 count A/D converter
Conversion Rate: 7/s (typical)
Display:
Red 7-segment LED display,
20 mm (0.8") H
Display Test: 8.8.8.8.8.8.8. on power-up
Power Options:
120 Vac (60 Hz)—standard
220 Vac (50 Hz)—optional
15 Vdc @ 900 mA—optional
Scale:Programmable from 1 to 30000
Offset:
0.00 to 20.00 (current input),
0.000 to 10.000 (voltage input),
0.00 to 100.00 (millivolt input)
Rate: 0 to 500 seconds
Prop. Band: 0 to 100% of span
Reset: 0 to 50 repeats/min
On/Off Deadband (Programmable):
0 to full scale
Control Output: 5 Vdc drive @ 50 mA
max (internal 5 Vdc source)
Output (Optional):
1. Open collector—6 open-collector
outputs, maximum sink capability
50 mA per output (internal source)
2. Relays—SPST; 1 A @ 28 Vdc
or 0.5 A @ 120 Vac resistive
Output Termination:
Euro-style pluggable connector
Rate: Variable, displayed as rate
change/time base
Enclosure Dimensions:
Case: 192 W x 160 H x 103 mm
(7.55 x 6.29 x 4.05")
Material:
Polystyrene with crystal-clear
polycarbonate lid
Ingress Protection:
Up to IP65 (DIN standard)
Weight:1.4 kg (3 lb)
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
  
CN1511RTD-2
Consult Sales  
Availability: 
 
 
Wall-mount temperature controller, RTD input, 8-15 Vdc
  
CN1511TH
Consult Sales  
Availability: 
 
 
Wall-mount temperature controller, thermistor input
CN1511TC
CN1511TC
SGD881.27
Availability: 1 week
 
Wall-mount temperature controller, thermocouple input
  
CN1511TC-2
Consult Sales  
Availability: 
 
 
Wall-mount temperature controller, 8-15 Vdc
  
CN1511TC-4
SGD1,135.00
Availability: 5 weeks
 
Wall-mount temperature controller, thermocouple input, 6 open collector outputs
  
CN1511TC-3
Consult Sales  
Availability: 
 
 
Wall-mount temperature controller, thermocouple input, 6 relay outputs
All prices on this site are shown in Singapore Dollars.
Note: Comes with watertight connectors (2) and complete operator’s manual.

Part Number Builder

Option Descriptions:


(1) Input Code select from:
TC for J K T E Thermocouple input
RTD for Pt100 Ohm input
TH for Thermistor input
R for R Thermocuple input
S for S Thermocuple input
B for B Thermocuple input
P for 0 to 100 mV input
V for 0 to 10 Vdc inout
C for 4 to 20 mA

(2) Power Options select from:
Nothing(leave field blank) for Std 120 Vac
-1 for 240 Vac
-2 for 8 to 15 Vdc

(3) Output Options select from:
Nothing(leave field blank) for Std 5 Vdc drive @ 50 mA max
-3 for 6 relay outputs - 4 alarms 2 timers
-4 for 6 open-collector outputs 4 alarms - 2 timers
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.