Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Singapore: 1800 622 1156
International+65 6415 5353

Pneumatic Parallel Grippers, Short Stroke Gripper

DPDS Series Small Parallel Pneumatic Gripper

Parallel Pneumatic Grippers | DPDS Series Small Parallel Pneumatic Gripper

Parallel Pneumatic Grippers

SGD1,705.00 DPDS-047M-009-B-V

  • Pneumatic Parallel Gripper Available in 3 Stroke Lengths
  • Modular Automation with DIRECTCONNECT™, Mates with Slides and Rotaries without Adaptor Plates.
  • Multiple Mounting Locations on Top and Back
  • Multiple Air Port Locations are Standard
  • Full Range Adjustable Magneto Resistive Sensors
  • Precision Gripper - Accuracy of ±0.05 mm (±0.002")
  • Repeatability of ±0.03 mm (±0.001")
  • Gripper Can be Mounted and Operated in Any Orientation
  • Up to 5 Million Cycles in Typical Applications
  • Up to 10 Million with Maintenance
  • Air Pressure Operating Range of 1.5 to 7 bar (20 to 100 psi)
  • Temperature Operating Range -35 to 80°C (30 to 180°F)
  • Required Air Supply Filter of 40 Micron or Better
  • Requires a 4-Way, 2-Position Valve
Motion - View related products

Description


DPDS Series Pneumatic Gripper is a small parallel 2-jaw gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws are attached to the bottom and are supported throughout the length of the body. Dowel holes are located in the body and jaws for exact location.
DPDS Pneumatic Grippers are available in stroke lengths from 2.4 to 6.4 mm (0.09" to 0.25") with a force grip ranging from 62 to 445 N (14 to 100 lbs). The DPDS pneumatic gripper is a modular automation component and can be mounted to DLM Rail Slides or DRF Rotary Actuators without additional adaptor plates. They can be mounted on the top or back and have air ports on the top, back and front to support mounting and operation in any direction. Top manifold air ports can be used to help eliminate tubing and fittings at the gripper location. Accessory mounting slots make it easy to add magneto sensors.

Pneumatic linear motion components are double acting air cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device.

Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN signals.
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
  
DPDS-047M-009-B-V
SGD1,705.00
Availability: 13 weeks
 
Pneumatic Parallel Gripper with a stroke of 2.4 mm (0.09') and a grip force of 62 N (14 lb)
  
DPDS-047M-013-B-V
SGD2,701.02
Availability: 1 week
 
Pneumatic Parallel Gripper with a stroke of 3.2 mm (0.13') and a grip force of 62 N (14 lb)
  
DPDS-056M-013-B-V
SGD1,345.00
Availability: 13 weeks
 
Pneumatic Parallel Gripper with a stroke of 3.2 mm (0.13') and a grip force of 98 N (22 lb)
  
DPDS-056M-019-B-V
SGD1,465.00
Availability: 13 weeks
 
Pneumatic Parallel Gripper with a stroke of 4.8 mm (0.19') and a grip force of 98 N (22 lb)
  
DPDS-088M-019-B-V
SGD1,735.00
Availability: 13 weeks
 
Pneumatic Parallel Gripper with a stroke of 4.8 mm (0.19') and a grip force of 222 N (50 lb)
  
DPDS-088M-025-B-V
SGD1,930.00
Availability: 1 week
 
Pneumatic Parallel Gripper with a stroke of 6.4 mm (0.25') and a grip force of 222 N (50 lb)
  
DPDS-125M-019-B-V
SGD2,150.00
Availability: 13 weeks
 
Pneumatic Parallel Gripper with a stroke of 4.8 mm (0.19') and a grip force of 445 N (100 lb)
  
DPDS-125M-025-B-V
SGD2,510.00
Availability: 13 weeks
 
Pneumatic Parallel Gripper with a stroke of 6.4 mm (0.25') and a grip force of 445 N (100 lb)
Accessories
  
OHSP-011
SGD372.00
Availability: 1 week
 
PNP magneto resistive sensor (90°) with quick disconnect
  
OHSN-011
SGD269.00
Availability: 13 weeks
 
NPN magneto resistive sensor (90°) with quick disconnect
OHSP-017
OHSP-017
SGD400.58
Availability: 1 week
 
PNP magneto resistive sensor with quick disconnect
OHSN-017
OHSN-017
SGD268.96
Availability: 1 week
 
NPN magneto resistive sensor with quick disconnect
CABL-010
CABL-010
SGD91.90
Availability: 1 week
 
Quick disconnect cable [2 m (6') long]
  
CABL-013
SGD159.89
Availability: 13 weeks
 
Quick disconnect cable [5 m (16') long]
  
SLKT-197V
SGD130.00
Availability: 13 weeks
 
Manifold o-ring seal kit (models 047M and 056M only)
  
SLKT-199V
SGD130.00
Availability: 13 weeks
 
Manifold o-ring seal kit (models 088M and 125M only)
  
OFSV-004
SGD198.00
Availability: 13 weeks
 
Fail safe valve (models 088M and 125M only)
  
OM-AIR-M22270403
SGD28.50
Availability: 1 week
 
Mini 90° swivel elbow connector with M3 thread and 4mm barb fitting
All prices on this site are shown in Singapore Dollars.
Note: * Sensor and cable sold separately.
Ordering Example: (2) CABL-010 Quick disconnect 2 m (6') cables, SGD91.900  plus (1) DPDS-047M-009-B-V Parallel gripper with a stroke of 2.4mm (.09'') and a grip force of 62N (14lb), SGD1,705.00  plus (2) OHSP-011 PNP sensors with quick disconnect, SGD372.000, SGD91.90 X 2 + 1,705.00 + 372.00 X 2 = SGD2,632.80
We noticed you are from the US. Visit your local site for regional offers and live support.