Ruby bearings and a non-drag pick-off give these adjustable insertion flow sensors the widest flow range
of any of the paddlewheel types. A Hall-effect device detects the passage of miniature magnets in the
six rotor blades. The resulting square-wave signal can be sent hundreds of feet without a transmitter,
over unshield cable. This signal can be connected directly to many PLCs and other controls without
A depth adjustment system allows two basic sizes
to cover pipe sizes from 7.62 to 102 cm (3 to 40").
Probe Body: Brass or 316 SS Rotor: PVDF Shaft: Nickel-bound Tungsten Carbide standard, ceramic optional Bearings: FP6501/FP6502: Ruby ring, ruby end stone, set in PVDF bearing holder FP6511/FP6512: Bronze Ball Valves standard, 316SS optional Power: 5 to 24 Vdc, 1.5 mA Signal: Square wave, 11 Hz/fps (approx.), current sinking output, 20 mA maximum, NPN (Hall Effect) Cable: #22 AWG 3-conductor, 6 m (18') standard; 650 m (2000') max Accuracy: ±1.5% of full range Range: 0.3 to 30 fps Maximum Working Pressure: 14 bar (200 psi) at 24°C (75°F) Maximum Temperature: 93°C (200°F) at 0 psig Shipping Weight: FP6501: 1.8 kg (4 lb) FP6502: 2.3 kg (5 lb) FP6511: 5.9 kg (13 lb) FP6512: 6.8 kg (15 lb) Pipe Size Range: FP6501/FP6511: 7.62 to 31 cm (3 to 12") FP6502/FP6512: 31 to 102 cm (12 to 40") Fitting Size: FP6501/6502: 1½ MNPT FP6511/6512: 2 MNPT
† All prices on this site are shown in Singapore Dollars. Note: Comes complete with operator’s manual.
Note: Customer supplied pull-up resistor may be required - 2 to 10 kohm.