Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Singapore: 1800 622 1156
International+65 6415 5353

Turbine Flowmeters with Economical Ball Bearing Design

FTB-100 Series

Turbine Flowmeters with Economical Ball Bearing Design | FTB-100 Series

Turbine Flowmeters with Economical Ball Bearing Design

See All Models Below

  • NIST Certificate Included for Water
  • ±1/2% Rdg Accuracy
  • Non-Metallic Bearing Retainers for Long Life
  • Replacement Bearings Field Installable Without Loss of Calibration
  • Disassembles Quickly for Easy Maintenance
  • Deflector Cones Stabilize Low Mass Rotor for Increased Bearing Life
  • 4 to 20 mA, 0-5 V, and Scaled Frequency Outputs Available
Turbine, Paddle Wheel & Positive Displacement Flow Meters - View related products

Description

The FTB-100 Series of turbine meters have a sealed ball bearing design for high accuracy performance (±½% of reading, not full scale) at an economical cost. The non-metallic bearing retainers minimize friction, thereby allowing these meters to be used with clean fluids that have poor lubricating properties ( i.e.water). Ball bearings also give the widest linear flow range, particularly in larger turbines. Bearing replacement and clean-up are fast and easy, since all internal parts are easily accessible by removing a single nut.

These turbine flowmeters have a low mass rotor design which allows rapid dynamic response, so they can be used in pulsating flow applications. Deflector cones eliminate downstream thrust on the rotor and allow hydrodynamic positioning of the rotor between the cones. This provides wider rangeability and longer bearing life than conventional turbine flowmeters. Integral flow-straightening tubes minimize the effects of upstream turbulence.
FTB-100 Turbine Meters are available with integral signal conditioners (as shown in photo) which provide scaled and unscaled frequencies, 4-20 mA, or 0-5 Volt outputs. Units without integral signal conditioners are supplied with mating connector for two-wire hook-up.

SPECIFICATIONS
Accuracy: ±½% of reading
Repeatability: ±0.1% of reading
Maximum Temperature Range: -268 to 232°C (-450 to 450°F)
Maximum Intermittent Overrange: 150% of maximum range
Minimum Output Amplitude: 30 mV Peak-to-Peak Unscaled Pulse
Materials of Construction:
   Body: 304 stainless steel; 1/2 NPT bodies contain Silver Solder. 3/4 NPT and larger are welded.
   Rotor: 17-4 pH steel
   Bearings: Ceramic
Minimum straight pipe requirements: 10 pipe diameters upstream, 5 downstream

Model No. Fittings Linear Flow Range
Water
Max Operating Pressure Max Pressure Drop Length
mm (in)
Nominal
K-Factor
Pulses/Gal
Weight
kg (lb)
LPM GPM
FTB-101 ½ MNPT 1.32 to 13.2 0.35 to 3.5 5000 psig 3.0 psid 62 (2.45) 13,000 0.4 (1)
FTB-102 ½ MNPT 2.84 to 28.4 0.75 to 7.5 5000 psig 5.0 psid 62 (2.45) 10,000 0.4 (1)
FTB-103 ½ MNPT 4.73 to 36 1.25 to 9.5 5000 psig 5.2 psid 62 (2.45) 6,000 0.4 (1)
FTB-104 ¾ MNPT 6.62 to 61 1.75 to 16 5000 psig 3.0 psid 70 (2.75) 4,100 0.4 (1)
FTB-105 ¾ MNPT 9.5 to 110 2.5 to 29 4250 psig 5.0 psid 83 (3.25) 2,200 0.4 (1)
FTB-106 1 MNPT 15 to 227 4 to 60 3850 psig 5.1 psid 89 (3.5) 640 0.9 (2)
FTB-107 1¼ MNPT 23 to 352 6 to 93 3850 psig 4.3 psid 99 (3.88) 410 0.9 (2)
FTB-108 1½ MNPT 30 to 492 8 to 130 3000 psig 3.0 psid 111 (4.38) 230 1.4 (3)
FTB-109 2 MNPT 57 to 852 15 to 225 2500 psig 3.3 psid 121 (4.75) 120 1.8 (4)
FTB-110 2½ MNPT 95 to 1514 25 to 400 2250 psig 4.0 psid 154 (6.06) 62 2.3 (5)
FTB-111 3 MNPT 151 to 2460 40 to 650 2000 psig 4.0 psid 191 (7.50) 55 3.2 (7)
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
FTB-101
FTB-101
SGD2,845.00
Availability: 6 weeks
 
0.35-3.5 GPM Range, Water; 1/2 MNPT
  
FTB-102
SGD2,845.00
Availability: 5 weeks
 
0.75-7.5 GPM Range, Water; 1/2 MNPT
  
FTB-103
SGD2,845.00
Availability: 8 weeks
 
1.25-9.5 GPM Range, Water; 1/2 MNPT
  
FTB-104
SGD2,845.00
Availability: 8 weeks
 
1.75-16 GPM Range, Water; 3/4 MNPT
  
FTB-105
SGD2,845.00
Availability: 8 weeks
 
2.5-29 GPM Range, Water; 3/4 MNPT
  
FTB-106
SGD3,150.00
Availability: 1 week
 
4-60 GPM Range, Water; 1 MNPT
  
FTB-107
SGD3,420.00
Availability: 1 week
 
6-93 GPM Range, Water; 1¼ MNPT
  
FTB-108
Consult Sales  
Availability: 
 
 
8-130 GPM Range, Water; 1½ MNPT
  
FTB-109
SGD4,055.00
Availability: 8 weeks
 
15-225 GPM Range, Water; 2 MNPT
  
FTB-110
SGD5,240.00
Availability: 8 weeks
 
25-400 GPM Range, Water; 2½ MNPT
  
FTB-111
SGD5,240.00
Availability: 8 weeks
 
40-650 GPM Range, Water; 3 MNPT
All prices on this site are shown in Singapore Dollars.
Note: Comes with NIST certificate for water and complete operator’s manual.
Standard NIST calibration: Viscosity = 1CK: no charge; 0.8 CK to 0.99 CK: add $370; 2 CK to 100 CK: for FTB-101 through FTB-107, add $625; for FTB-108 and FTB-109, add $625, and for FTB-110 and FTB-111, add $465.
If an integral signal conditioner is required please order as a system. Omega will scale the signal conditioner to the turbine meter.
Example: SYS/FTB-101/FLSC-C1-LIQ, scaled system includes: Signal Conditioner, Enclosure, Turbine Meter and Fitting, $1954.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Ordering Example: (1) FTB-105 Liquid turbine meter calibrated to water 2.5 to 29 GPM, .75, SGD2,845.00
We noticed you are from the US. Visit your local site for regional offers and live support.