Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Singapore: 1800 622 1156
International+65 6415 5353

Modular Signal Conditioning System
for Strain Gage Bridges, mV and other Sensor Signals

OM2

OM2 Series Modular Signal Conditioning System for Strain Gage Bridges, mV and other Sensor Signals | OM2

See All Models Below

  • Compact, Light and Convenient to Use
  • Easy Access to All Trimpots
  • Integral Bridge Completion Resistors
  • Adjustable Bridge Sensor Excitation
  • Adjustable Filter Frequency AC or DC Operation
  • Screw Clamp Terminal Blocks
Accessories - View related products

Description

The OMEGA™ OM2 modular signal conditioning system provides a low cost, versatile method of interconnecting a variety of analog signals for measurement and control systems. The OM2 modules interface directly with sensors or analog signals such as strain gages, mV, thermocouples and RTD’s. The module conditions the input signal to an amplified voltage output of ±10 Vdc, allowing longer signal transmission and interfacing with data acquisition products such as analog/digital cards, dataloggers, PLC’s and chart recorders. The backplane includes a power supply (to power the modules) and mounting rails for convenient mounting capability. All connections are easily made with a screwdriver.

The backplane is available with a 115 Vac, 230 Vac or 10-36 Vdc power supply.

The backplane and signal conditioner assembly make a convenient, lightweight and accurate method of multiple signal conditioning in instrumentation environments. The signal conditioning modules can also be used by themselves as single amplifier devices. An optional interface mounting block can be purchased with screw terminations for easy power and output signal hookup. A typical system would include six modules and one backplane/power supply assembly.

For complete product specifications see the detailed spec sheet.
Place Order(Specify Model Number)
Part Number/Desc.
Qty
Description
OM2-162
Consult Sales  
Availability: 
 
 
Signal conditioning module for 1/2 and full strain bridge circuits
OM2-163
Consult Sales  
Availability: 
 
 
Signal conditioning module for 1/4 , 1/2 and full strain bridge circuits (compatible with OM2-8608 only)
OM2-165
Consult Sales  
Availability: 
 
 
Signal conditioning module for full strain bridge circuits or transducers with open collector output
ACCESSORIES
OM2-8608-115AC
Consult Sales  
Availability: 
 
 
115 Vac powered backplane for 8 OM2 signal conditioning modules with power supply and mounting rails included
OM2-8608-230AC
Consult Sales  
Availability: 
 
 
230 Vac powered backplane for 8 OM2 signal conditioning modules with power supply and mounting rails included
OM2-8608-24DC
Consult Sales  
Availability: 
 
 
DC powered backplane for 8 OM2 signal conditioning modules with power supply and mounting rails included; 10 to 36 Vdc power
OM2-8608-48DC
Consult Sales  
Availability: 
 
 
DC powered backplane for 8 OM2 signal conditioning modules with power supply and mounting rails included; 24 to 72 Vdc power
OM2-2006
Consult Sales  
Availability: 
 
 
115 Vac powered backplane for one OM2 signal conditioning module with power supply (mounting rails not included) (not compatible with OM2-161)
OM2-2005
Consult Sales  
Availability: 
 
 
±15 Vdc powered backplane for one OM2 signal conditioning module (screw terminals only) (not compatible with OM2-161)
OM2-8100
Consult Sales  
Availability: 
 
 
Two 16' mounting rails (2 rails already included with OM2-8608)
All prices on this site are shown in Singapore Dollars.
Note: Comes with complete operator’s manual.

Product Manuals:

Download Bridgesensor Users Guide
Download Bridgesensor Users Guide
Download Strain Gage Bridge Signal Conditioner
We noticed you are from the US. Visit your local site for regional offers and live support.