Cart  |  Contact  |  Help  | 
Toll-Free in Singapore: 1800 622 1156
International+65 6415 5353

Washdown Stepper Motors for Wet and Dusty Environments

OMHW Series

Washdown Stepper Motors | OMHW Series

Washdown Stepper Motors

See All Models Below

  • Bipolar IP65-Rated Step Motors
  • NEMA 23, 24 and 34 Frame Sizes Available
  • Integral 3 m (10') Shielded Cable with Cable Gland
  • Sealed Laminations
  • Front Shaft Seal
  • 200 full steps per revolution (1.8° per step)
Drives & Motors - View related products

Description

OMEGA™ is pleased to announce the addition of NEMA size 23, 24 and 34 stepper motors with IP65 ratings for operation in severe environmental conditions. The OMHW series are dust proof and resistant to low pressure water jets, and are ideal for applications in wet factory environments such as the food and beverage industry or outdoor use. Key features include a nickel plated brass cable gland, sealed laminations, and front shaft contact seal. All models have an internal corrosion-resistant film coating as standard. IP65 specifies a product that is dust tight (no ingress of dust; complete protection against contact) and protected against water jets (water projected by a nozzle from any direction shall have no harmful effects).

Important Note About Motor Current vs Drive Current:
When setting the drive current, you should multiply the stepper motor's nameplate current by 1.2. This provides the correct conversion from the motor's full-step nameplate rating to the drive's current setting. If the motor nameplate current is specified as 5 Amps, set the drive current to 6 Amps (5 x 1.2) to achieve full performance.

The OMHW stepper motors are 8-lead motors, offering the flexibility of either series or parallel connection. The motors should be series connected for best torque at low speeds, and parallel connected for best torque at higher speeds.

Motor Wiring --- Parallel Connection (8-lead motors):
Drive A+ = Orange + Black/White
Drive A- = Black + Orange/White
Drive B+ = Red + Yellow/White
Drive B- = Yellow + Red/White

Motor Wiring --- Series Connection (8-lead motors):
Drive A+ = Orange
Drive A- = Black
Drive B+ = Red
Drive B- = Yellow
Connect Orange/White to Black/White (not connected to drive)
Connect Red/White to Yellow/White (not connected to drive)
Place Order(Specify Model Number)
Part Number/Desc.
Qty
Description
Quick Ship
OMHW23-598
SGD445.00
Availability: 5 weeks
 
NEMA 23 step motor, 158 oz-in minimum holding torque, 4.24 A/phase (parallel)
Quick Ship
OMHW23-753
SGD475.00
Availability: 19 weeks
 
NEMA 23 step motor, 153 oz-in minimum holding torque, 1.41 A/phase (parallel)
Quick Ship
OMHW23-601
SGD515.00
Availability: 5 weeks
 
NEMA 23 step motor, 269 oz-in minimum holding torque, 4.24 A/phase (parallel)
Quick Ship
OMHW23-754
SGD545.00
Availability: 14 weeks
 
NEMA 23 step motor, 227 oz-in minimum holding torque, 1.41 A/phase (parallel)
Quick Ship
OMHW24-108
SGD720.00
Availability: 1 week
 
NEMA 24 step motor, 354 oz-in minimum holding torque, 4.0 A/phase (parallel)
Quick Ship
OMHW34-696
SGD955.00
Availability: 5 weeks
 
NEMA 34 step motor, 1062 oz-in minimum holding torque, 4.06 A/phase (parallel)
Quick Ship
OMHW34-506
SGD965.00
Availability: 5 weeks
 
NEMA 34 step motor, 1260 oz-in minimum holding torque, 5.6 A/phase (parallel)
All prices on this site are shown in Singapore Dollars.
Ordering Example: (1) OMHW23-598 Washdown stepper motor, 158 oz-in minimum holding torque, 4.24 A/phase (parallel), SGD445.00