The PHUCN600 Series multi-parameter controller is a
microprocessor-based controller capable of measuring one of the
following parameters, pH, ORP, or conductivity.
When shipped from the factory, the PHUCN600 Series is not set to
measure any one parameter.When the PHUCN600 Series is
powered up for the first time, it will display the meter selection
screen where the meter type must be selected. This meter
selection screen will only be displayed when the PHUCN600
Series is powered up for the first time.
After the user selects a meter type the PHUCN600 Series will
remain set to that meter type until it is changed with the meter
selection menu function in the Utilities menu.
To return the PHUCN600 Series to its factory settings, the user
must re-select the current meter type from the meter selection
menu function. This will override all set-points and return all
settings back to the factory settings.
The PHUCN600 Series User’s menu has been divided into five
Calibration, used to calibrate the PHUCN600 Series
with the selected sensor
Utilities, used to manually control or override the outputs
Setup, used to configure the PHUCN600 Series many options
Diagnostics, used to troubleshoot any problems
Outputs, used to configure the PHUCN600 Series outputs.
There are two displays on the PHUCN600 Series. A bright LED
numeric display with bar graph on the outside front panel, and a
2-line, 16-character LCD display on the inside. The LED readout on
the outside panel can be seen several yards away. The distinctive,
Color coded bar graph will immediately indicate if you are within
the process parameters that you set (green), if the control relays
are on (yellow) and if you are in alarm condition (red). This makes
diagnosing pump and alarm malfunctions easy. All configuration
and control functions are performed on the LCD menu on the
inside front panel.
A universal mounting kit is included for surface, panel and pipemount
applications. The 1/4" DIN enclosure makes panel-mount
cutouts and engineering simple.
Complete and versatile the PHUTX600 is the 1/4 DIN two wire
transmitter which can measure Conductivity, pH or ORP.
PHUTX600 comes complete with a universal mounting kit for
surface, panel and pipe-mount applications. The NEMA 4X 1/4 DIN
enclosure is perfect for stand-alone or panel-mount operation.
PHUCN600 and PHUTX600 Series are packaged in a rugged
NEMA 4X polycarbonate enclosure making it ideally suited for
heavy-duty applications such as industrial wastewater
neutralization, municipal water and wastewater, pulp and paper,
and process control.
The PHE-600-SB Salt Bridge kit required
for use of the pH and ORE sensors is sold separately. pH and ORE sensors
can not be used without the Salt Bridge kit.
† All prices on this site are shown in Singapore Dollars. Note: Comes complete with operators manual.
* Insert cable length in feet.
†The PHE-600-SB Salt Bridge kit required for use of the pH and ORE sensors is sold separately. pH and ORE sensors can not be used without the Salt Bridge kit.