Rugged Design Offers a Variety of Protection Heads with 1/2 NPT Mounting Threads and a Screw-Type Terminal Block
Fixed Length Probe: 304 SST Sheath Connected to 304 SST Hex Fitting Spring Loaded: Improved Response Time and Vibration Resistance When Used in Thermowells*
Sensors Contain 100 Ohm Class “B” DIN Platinum Thin Film Elements
Standard 3-Wire Configurations with IEC60751/ASTM-E-1137 Color Codes (2- and 4-Wire Configurations also Available)
Fixed Length Operating Temperature: -50 to 500ºC ; Spring Loaded Temperature Range: -50 to 500°C (-50 to 260ºC at Head)
Fixed Length Probe Can be Used as a Direct Immersion Sensor with the Protection Head Isolating the Connections from the Outside Environment
Optional 4 to 20 mA Transmitters Can Be Conveniently Installed Into The PRTF-12 (Cast Iron) and PRTF-18 (Flip Top Aluminum) Connection Heads. The PRTF-14 (Miniature Aluminum) and PRTF-19 (Sub-Miniature Aluminum) Heads Do Not Accommodate Transmitters Due To Their Small Size
Connection Head Selection: PRTF-12 = Cast Iron Screw Top Head with Terminal Board (Accepts A Variety of Optional Transmitters) PRTF-14 = Miniature Aluminum Screw Top Head with Terminal Board (Does NOT Accept A Transmitter) PRTF-18 = Flip Top Cast Aluminum Head with Terminal Board (Accepts A Variety of Optional Transmitters) PRTF-19 = Sub-Miniature Aluminum Screw Cover Head with Terminal Board (Does NOT Accept A Transmitter)
This rugged design offers a variety of protection heads with 1/2" NPT mounting threads and 304SS sheath. Note that the final length dimension is reduced by 1/2" so if used in a thermowell the sensor will not bottom and cause damage to the sensor. The standard probe uses a Style 2 (3-wire) lead configuration, but other configurations are available. All probes include a screw terminal block for easy connection of copper extension wire.
Pricing for several popular models is shown in the ordering table below. Use the Part Number Builder to obtain pricing for other models.
For complete product specifications see the Related Links section at the bottom of this page.
† All prices on this site are shown in Singapore Dollars. Note: * When installed in a thermowell, the thread engagement will equal the spring loading compression length. Standard: Specify 1/8, 3/16 or 1/4 for probe diameter in inches. Standard probe lengths are 6, 9, 12, 18, and 24" but other lengths are available, specify length in the model number and price at the next longer standard length. Lengths over 24" can also provided, contact the Sales Department for availability and pricing. Metric: Specify M30 for 3mm, M4.5 for 4.5mm or M60 for 6mm diameter. Standard lengths are 150mm, 225mm, 300mm, 450mm or 600mm but other lengths are available, specify length in model number and price at the next longer standard price. Lengths over 600mm can be provided, contact the Sales Department for availability and pricing. Specify protection head style as follows: 12 = Cast Iron; 14 = Miniature Aluminum; 18 = Hinge Style Aluminum; 19 = Subminiature Aluminum. Ordering Example: (1) PRTF-12-2-100-1/4-6-E Fixed length industrial RTD probe with cast iron head, 3-wire configuration (style 2), 100 ohm Class B thin film element, 1/4, SGD131.00
Part Number Builder
Connection Head select from: 12 for Cast Iron 14 for Mini Aluminum 18 for Aluminum Hinged Top 19 for Sub-Mini Aluminum
Wire Configuration select from: 1 for 2 Wire Style 2 for 3 Wire Standard 3 for 4 Wire Style
Sheath Diameter select from: 1/4 for 1/4 in. Diameter 3/16 for 3/16 in. Diameter 1/8 for 1/8 in. Diameter M60 for 6mm Diameter M45 for 4.5mm Diameter M30 for 3mm Diamater
Sheath Length select from: 6 for 6 in. Length 9 for 9 in. Length 12 for 12 in. Length 18 for 18 in. Length 24 for 24 in. Length 150 for 150mm Length 225 for 225mm Length 300 for 300mm Length 450 for 450mm Length 600 for 600mm length
Spring Loading select from: Nothing(leave field blank) for Fixed Length -SL for Spring Loaded
Note: All combinations may not be valid, check spec sheet for valid part numbers.