Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Singapore: 1800 622 1156
International+65 6415 5353

Deep Tank/Sump Immersion Heaters

TAT6

Deep Tank/Sump Immersion Heaters | TAT6

Deep Tank/Sump Immersion Heaters

See All Models Below

  • 12 mm (0.475") Diameter Incoloy® Elements and Stainless Steel Wetted Parts Standard
  • Designed for Permanent Installation in Outdoor/ Indoor Applications
  • 0.61 to 3.6 m (2 to 12') Vertical Riser Height (for Thermostat Designs)
  • Weathertight Mounting Hardware Supplied
  • Riser Adjustable to Facilitate Mounting Variations
  • Nema 4 Electrical Enclosure with 3/4" Conduit Fitting
  • 38 mm (1 1/2") Sludge Legs
  • Double-Pole 16 to 121ºC (60 to 250°F) Pilot Duty Thermostat
  • Watertight Thermowell Sized for 9.5 mm (3/8") Maximum Diagram Sensing Bulb
  • 120V, 208V, 277V, and 575V Versions Available (Contact Omega)
Immersion Heaters - View related products

Description

Application These fluid immersion heaters are designed for top mounting in large or deep enclosed tanks having a manhole access or opening suitable to insert and attach the heater. They are usable for either outdoor or indoor applications, within exposed or in-ground tanks and sewerage sumps. They are designed for permanent mounting and can be sealed weathertight with supplied gaskets and adjustable riser fittings. NEMA 4 terminal housing is easily removable and resealed to facilitate installation. Units are available with element watt densities from 6 watt/in² for heavy oils, to 60 watt/in² for clean water immersion applications. Element bundle diameters ranging from minimum of 254 mm (10") OD to a maximum of 762 mm (30") OD are available. Construction The tubular elements are welded into a submersible liquid-tight stainless steel junction box. Element power leads are routed up through adjustable riser pipe and connected to a terminal block inside the upper NEMA 4 terminal housing. Unless specified otherwise, heaters are factory wired for three phase and are easily converted to single phase. All wetted parts parts are 300 series stainless steel. Standard unit includes 15.5 to 121ºC (60 to 250°F) double-pole thermostat mounted in upper housing that has a 9.5 mm (3/8") diameter bulb and capillary installed in watertight thermowell with adjustable compression fitting.

Model No. KW Number of Elements mm (inch)
240V-1Ph 240V-3Ph 480V-1Ph 480V-3Ph A B E
TAT60001 TAT60002 TAT60003 TAT60004 5 3 1829 (72) 387 (15.25) 190 (7.5)
TAT60005 TAT60006 TAT60007 TAT60008 7.5 6 266 (10.5)
TAT60009 TAT60010 TAT60011 TAT60012 10 9 343 (13.5)
TAT60013 TAT60014 TAT60015 15 12 419 (16.5)
TAT60016 TAT60017 TAT60018 20 18 571 (22.5)
TAT60019 TAT60020 30 24 724 (28.5)
Ordering Example: TAT60001, 5 KW immersion heater, 240 Vac, 1 phase.
Place Order(Specify Model Number)
Part Number/Desc.
Qty
Description
TAT60001
SGD6,765.00
Availability: 7 weeks
 
240V-1Ph, 10 KW, Number of Elements; 3
TAT60009
Consult Sales  
Availability: 
 
 
240V-1Ph, 5 KW, Number of Elements; 9
TAT60006
Consult Sales  
Availability: 
 
 
240V-3Ph, 7.5 KW, Number of Elements; 6
TAT60010
SGD8,940.00
Availability: 7 weeks
 
240V-3Ph, 10 KW, Number of Elements; 9
TAT60007
Consult Sales  
Availability: 
 
 
480V-1Ph, 7.5 KW, Number of Elements; 6
TAT60019
Consult Sales  
Availability: 
 
 
480V-1Ph, 30 KW, Number of Elements; 24
TAT60004
SGD6,765.00
Availability: 7 weeks
 
480V-3Ph, 5 KW, Number of Elements; 3
TAT60018
Consult Sales  
Availability: 
 
 
480V-3Ph, 20 KW, Number of Elements; 18

Order By Part Number

Part Number
Qty
Part Number
Qty


All prices on this site are shown in Singapore Dollars.
Ordering Example: (1) TAT60001 5 KW immersion heater, 240 Vac, 1 phase., SGD6,765.00
We noticed you are from the US. Visit your local site for regional offers and live support.