This item is being discontinued.
These stainless steel load cells are ideal for measuring in-line tension forces. Applications vary from cables on cranes, support rods in architectural designs, engine test beds, to industrial weighing applications. The LC701 Tension Link has a 6 ft. (2 m) cable while the LC711 has an integral MS style connector.
The LC701 and LC711 are also available in metric configurations, with ranges from 0-50 to 0-1000 kgf and metric threads.
Please see the LCM701 for complete details, or contact our Pressure department for more information.
Output: 3 mV/V ±0.25% FSO
Excitation: 10 Vdc (15V max)
>100 lb: ±0.10% FSO
≤100 lb: ±0.20% FSO
Hysteresis: ±0.10% FSO
Repeatability: ±0.05% FSO
Zero Balance: ±1.0% FSO
Operating Temp. Range: -46 to 121°C (-50 to 250°F)
Compensated Temp. Range: 16 to 71°C (60 to 160°F)
Zero: ±0.0045% FSO/°C
Span: ±0.007% rdg/°C
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Bridge Resistance: 350 Ω
Full Scale Deflection: 0.025 to 0.102 mm (0.001 to 0.004")
Construction: Stainless steel
LC701/LCM701: 1.8 m (6') insulated 4-conductor shielded cable
LC711/LCM711: DT02H-10-6P integral connector
Mating connector, LC711/LCM711: PT06F10-6S, sold separately
Weight: 0.45 kg (1 lb)
† All prices on this site are shown in Thai Baht.
Note: All LC701/LC711 series load cells include 5 point NIST traceable calibration certificate. Mating connector for LC711 sold separately, part number PT06F10-6S, $26.50.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Cable or Connector Style select from:701
for Cable Style711
for Connector Style
for 100 lb range250
for 250 lb range750
for 750 lb range1K
for 1000 lb range2K
for 2000 lb range
Note: All combinations may not be valid, check spec sheet for valid part numbers.