Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Thailand: 001 800 441 0237
International+65 6415 5353

 - Discontinued Thin Film Cryogenic Pressure Transducer

PX1005

Thin Film Cryogenic Pressure Transducer | PX1005

Thin Film Cryogenic Pressure Transducer

See All Models Below

CE
  • High Performance
  • High Reliability
  • 0.1% Stability for 18 months
  • Operates from -196 to +149°C (-320 to +300°F)
  • Exceptional Calibration Stability
Pressure Transducers - View related products

Description

This item is discontinued.


OMEGA’s PX1005 Sputtered Thin Film Pressure Transducer was designed for cryogenic service; it can operate in temperatures from -196°C to +149°C (-320°F to +300°F.) Yet, even in these difficult temperatures, it provides outstanding accuracy, long-term calibration stability and reliability. Static accuracy is ±0.25%, and thermal zero and sensitivity shifts over the compensated range of -196°C to +27°C (-320°F to +80°F) are less than ±0.01%/°F. The all-welded stainless-steel pressure cavity and double-isolated case ensures reliability in the tough environments normal to cryogenic service. OMEGA’s thin film technology makes this premium performance possible. The strain gages are sputter-deposited, forming a molecular bond with the substrate. There is virtually no shift, drift, or creep to cause the transducer’s calibration to change. OMEGA’s PX1005 is available in many standard ranges from 15 psi to 1,000 psi. A calibration record is supplied with every unit.

SPECIFICATIONS Excitation: 10 Vdc
Full Range Output: 30 mV nominal, 26 mV minimum
Residual Unbalance: 0 mV ±5% FSO at zero pressure
Input Resistance: 400 Ω nominal
Output Resistance: 400 Ω nominal
Insulation Resistance: 100 MΩ or greater @ 45 Vdc
Shunt Calibration: Provisions for single-arm, external shunt calibration
Sensing Element: 4-active-arm bridge using sputter-deposited thin-film elements.
Accuracy: Combined linearity, hysteresis and repeatability: ±0.25% FSO, BSL [Note: Performance is determined at 25°C ±1°C (77°F ±2°F), open circuit, rated excitation, unless otherwise specified]
Operating Temp Range: -196 to 149°C (-320 to 300°F)
Compensated Temp Range: -196 to 27°C (-320 to 80°F)
Thermal Effects:
   Span: ±0.01% FSO/°F
   Zero: ±0.01% FSO/°F
Vibration Sensitivity: At 35 g peak from 10 Hz to 2000 Hz (1/2" D.A.), the output shall not exceed 0.04% FSO/g for 15 psi units decreasing logarithmically to 0.003% FSO/g for 1000 psi units
Natural Frequency: 35 kHz at 1000 psi decreasing logarithmically 5 kHz at 15 psi
Shock: 100 g, 11 ms half sine wave without calibration shift or damage
Humidity: Per MIL-STD-810, method 507.1
Proof Pressure: 200% of rated pressure will not cause changes in performance beyond the specified tolerances
Burst Pressure: 3 times rated pressure
Wetted Parts: 17-4 PH vacuum melt or 15-5 PH stainless steel
Pressure Fitting: 7/16-20 male per MS33656-4
Mounting Isolation: Case isolation ensures that the sensing element will not be affected by external stresses
Mating Connector: PCS06E-10-6S(SR) (sold separately)
Weight: 145 g (5 oz) maximum
(Specify Model Number)
Part Number/Desc.
Qty
Description
PX1005L1-015AV
Consult Sales  
Availability: 
 
 
0-15 PSIA cryogenic pressure transducer, with integral electrical connector
PX1005L1-025AV
Consult Sales  
Availability: 
 
 
0-25 PSIA cryogenic pressure transducer, with integral electrical connector
PX1005L1-050AV
Consult Sales  
Availability: 
 
 
0-50 PSIA cryogenic pressure transducer, with integral electrical connector
PX1005L1-100AV
Consult Sales  
Availability: 
 
 
0-100 PSIA cryogenic pressure transducer, with integral electrical connector
PX1005L1-250AV
Consult Sales  
Availability: 
 
 
0-250 PSIA cryogenic pressure transducer, with integral electrical connector
PX1005L1-500AV
Consult Sales  
Availability: 
 
 
0-500 PSIA cryogenic pressure transducer, with integral electrical connector
PX1005L1-1KAV
Consult Sales  
Availability: 
 
 
0-1,000 PSIA cryogenic pressure transducer, with integral electrical connector
Accessories
PCS06E10-6S
THB12,578.99
Availability: 8 weeks
 
Mating connector for PX1005 (sold separately)
All prices on this site are shown in Thai Baht.
Note: Some discoloration of the pressure connection and surrounding area may occure due to the hot/cold calibration of this product.

Ordering Example: (1) PCS06E10-6S mating connector (sold separately), THB12,578.99 

Option Descriptions:


(1) Range (psi) select from:
015 for 0-15
025 for 0-25
050 for 0-50
100 for 0-100
250 for 0-250
500 for 0-500
1K for 0-1000

(2) Units select from:
AV for Absolute Model
SV for Sealed Gage Model
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.