Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

DIN Rail Mountable Universal Temperature Process Controller  - Discontinued

CN245-R1-R2-F3-C4

DIN Rail Mountable Universal Temperature Process Controller | CN245-R1-R2-F3-C4

DIN Rail Mountable Universal Temperature Process Controller

See All Models Below

CE
  • DIN Rail Mountable
  • Dual Display
  • Type J, K, R and S Thermocouple Inputs
  • Process Inputs
  • RTD and Thermistor Inputs
  • Alarm Functions
  • On/Off or PID control
  • 3 Step Ramp Soak Feature
  • Autotune
  • Digital Input
  • Heater Loop Break Alarm
  • 24 to 230 Vac/Vdc
  • Password Protection
  • RS485 Standard
  • Optional Software with Configuration Module

Description

The CN245-Series has been discontinued. For a possible alternate, please see CN401-11445-C4 as an alternative

.
Monitor and control temperature or process applications with precision using the CN245 Series DIN rail mountable controllers. The CN245 Series provides dual LED displays for local indication of process value and setpoint value. Control methods include on/off, PID, auto-tune and manual-tune. Controller includes a 3 setpoint ramp/soak control feature, alarm functions, RS485 communications and heater loop break alarm. Beside operation as multi-setpoint PID controller, the unit can be ideally used as signal converter thanks to a universal input (selectable by parameter for up to 18 different signals) and the analog output which is galvanically isolated and programmable for rescalable retransmission of process/setpoint value. An optional software package CN-SW-HW-KIT includes cable and configuration module for quick configuration of units, as well as copying configuration parameters from one unit to another. The configuration module can also be purchased separately and with a built-in battery feature, configuration settings can be downloaded and copied to module without power applied to controller. Module can then be plugged into a new unit without power applied and the configuration setting can be transferred for easy set up for multiple units.

Specifications
Supply Voltage: 24 to 230 Vac/Vdc ±15%, 50/60 Hz
Power Consumption: 3 W
Display: Two 4-digit, 10 mm (0.4") green (SV), 7.6 mm (0.3") red (PV)
Accuracy: ±0.5°C temperature, 0.2% reading
Resolution: 1°/0.1° 10 µV process
A/D Conversion: Sigma-delta
Reading Rate: Programmable
Digital Filter: Programmable
Operating Conditions: Temperature 0 to 45°C (32 to 113°F), humidity 35 to 95 RH%
Enclosure: Polycarbonate V0
Front Panel: Silicon V0
Dimensions: 90 H x 72 W x 64 mm D (3.5 x 2.8 x 2.5")
Weight: 195 g (6.88 oz)
Inputs:
    Thermocouple: K, J, S, R
    RTD: Pt100, Pt500, Pt1000, Ni100
    Thermistor: PTC 1K, NTC 10K (B 3435K), NTC 2252Ω
    Process: 4 to 20 mA, 0 to 10V, 0 to 40 mV, potentiometer 0 to 6/160 kΩ
Sampling Time: 4,1 ms (242 Hz frequency)
1 Digital Input: Up to 4 setpoint selections, hold, run, tuning launch, start/stop cycle
Outputs:
    2 Relays: 5 A to 250 Vac (resistive)
    DC Pulse: 12 Vdc, 30 Ma
    Analog: Programmable for 4 to 20 mA, 0 to 10 Vdc, control or retransmission PV/SP
Serial Communication: RS485 Modbus ® RTU
Control Algorithms: On/off with hysteresis, P, PI, PID, PD, time proportional
Tuning: Manual or autotune
Data Protection: Lock command/ alarm setpoint, access to parameters by password
Alarm Modes: Absolute/threshold, band, high/low deviation; loop break alarm function
Soft-Start: Rising gradient expressed as °C or °F/hour
Programmer Function: Start/stop, 3 steps pre-programmed cycle
(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
CN245-R1-R2-F3-C4
CN245-R1-R2-F3-C4
Consult Sales  
Availability: 
 
 
DIN rail controller, relay/relay/dc Pulse or analog output (selectable for output 3), RS485, heater loop break
Accessories
  
CN-SW-HW-KIT
TWD9,615
Availability: 1 week
 
cable and configuration module kit
  
CN-CONFIG-MODULE
TWD4,504
Availability: 1 week
 
memory plug in module
  
RAIL-35-1
TWD636
Availability: 1 week
 
mm DIN rail, 1 m (3.3') length
RAIL-35-2
RAIL-35-2
TWD1,190
Availability: 1 week
 
mm DIN rail, 2 m (6.6') length
CNQUENCHARC
CNQUENCHARC
TWD1,687
Availability: 1 week
 
suppression kit, 110 to 230 Vac
All prices on this site are shown in Taiwan Dollars.
Note: Comes complete with operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.