Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

Pneumatic Parallel 2-Jaw Grippers with High Gripper Force

DPG Parallel Gripper - Compact & Robust Design

Parallel Grippers, Pnuematic | DPG Parallel Gripper - Compact & Robust Design

Parallel Grippers, Pnuematic

TWD26,395 DPG-10M-1

  • 2-Jaw Parallel Gripper Available in 4 Stroke Lengths
  • Pneumatic Grippers Can be Mounted and Operated in Any Orientation
  • Highly Configurable Modular Automation— Exclusive Direct Connect™ Robohand Technology Provides Multiple Mounting Options
  • Compact & Robust Design with High Gripper Force
  • Fail Safe Spring Assist Hold Jaws Closed with Loss of Air Pressure
  • Up to 5 million Cycles in Typical Life Cycle
  • Temperature Operating Range -35 to 80°C (-30 to 180°F)
  • Non-Synchronous and Single Jaw Motion
  • Precision Gripper - Repeatability and Accuracy of ±0.05 mm (±0.002")
  • Highly Configurable Modular Automation
  • Multiple Air Port Locations
  • Operates Under Pressure Range of 3 to 7 Bar (40 to 100 psi)
  • System Requires Air Filtration of 40 Micron or Better
  • 4 Way, 2 Position Valve Required
  • Gripper Finger Tooling is Customer Responsibility
Motion - View related products

Description

DPG Series Pneumatic Gripper is a parallel 2-jaw gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws can be mounted on the bottom or side and are supported throughout the length of the body to make this gripper an extremely robust, yet compact, design. They are also available with optional spring assist ("-C" option) on the close stroke to prevent the part from being dropped in case there is a loss of air pressure. They are available in stroke lengths from 6.4 to 25.4 mm (0.25" to 1.00") with a gripper force of 222 N (50 lbs). The DPG pneumatic gripper shielded design allows this gripper to be used in harsh environments.

The DPG pneumatic gripper is a modular component and can be mounted to DLT Linear slides or DRG Rotary Actuators without additional adaptor plates. They can be mounted on the top or side and have air ports on the top, side and front to support mounting and operation in any direction. Top manifold air ports can be used to help eliminate tubing and fittings at the gripper location. Accessory mounting slots make it easy to add magneto sensors and inductive sensor kits are available, the grippers have built in slots for inductive sensor targets.

Pneumatic linear motion automation components are double acting air cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device. Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN sourcing signals.
(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
  
DPG-10M-1
TWD26,395
Availability: 1 week
 
Pneumatic Gripper with 6.4mm (0.25") stroke
  
DPG-10M-1-C
TWD28,975
Availability: 13 weeks
 
Pneumatic Gripper with spring assist and 6.4mm (.025") stroke
  
DPG-10M-2
TWD30,035
Availability: 1 week
 
Pneumatic Gripper with 12.7mm (0.50") stroke
  
DPG-10M-2-C
TWD32,615
Availability: 13 weeks
 
Pneumatic Gripper with spring assist and 12.7mm (0.50") sroke
  
DPG-10M-3
TWD39,150
Availability: 13 weeks
 
Pneumatic Gripper with 19.1mm (0.75") stroke
  
DPG-10M-3-C
TWD41,430
Availability: 13 weeks
 
Pneumatic Gripper with spring assist and 19.1mm (0.75") stroke
  
DPG-10M-4
TWD35,690
Availability: 13 weeks
 
Pneumatic Gripper with 25.4mm (.1.00") stroke
  
DPG-10M-4-C
TWD37,995
Availability: 1 week
 
Pneumatic Gripper with spring assist and 25.4mm (1.00") stroke
Sensor Accessories - Sensors and Cables Sold Separately
  
OISN-014
TWD8,315
Availability: 1 week
 
NPN inductive proximity sensor
  
OISP-014
TWD8,775
Availability: 1 week
 
PNP inductive proximity sensor
  
OSMK-119
TWD5,620
Availability: 10 weeks
 
DPP-10M-14M inductive sensor mounting kit - mounts 2 sensors
  
OHSN-011
TWD5,745
Availability: 13 weeks
 
NPN magneto resistive sensor 90º barrell with quick disconnect fitting
  
OHSP-011
TWD7,955
Availability: 1 week
 
PNP magneto resistive sensor, 90° barrell with quick disconnect fitting
OHSN-017
OHSN-017
TWD5,745
Availability: 1 week
 
NPN magneto resistive sensor short barrell with quick disconnect fitting
OHSP-017
OHSP-017
TWD8,567
Availability: 1 week
 
PNP magneto resistive sensor short barrell with quick disconnect fitting
CABL-010
CABL-010
TWD1,970
Availability: 1 week
 
2 m (6') sensor extension cable with quick disconnect fitting
  
CABL-013
TWD3,405
Availability: 13 weeks
 
5 m (16') sensor extension cable with quick disconnect fitting
PNEUMATIC ACCESSORIES - See Related Links for Additional Accessory Selections
  
TYUTH95-532332-100
TWD990
Availability: 5 weeks
 
Polyurethane 4mm (5/32") tubing 100 ft, assorted colors in stock
TYUTH95-14160-100
TYUTH95-14160-100
TWD2,226
Availability: 5 weeks
 
Polyurethane 1/4' tubing 100 ft, assorted colors in stock
  
OM-AIR-C0K510405
Consult Sales  
Availability: 
 
 
Push-to-connect Flow Control (regulating out) valve, M5 thread - 4mm (5/32") OD
  
OM-AIR-C2VA00405
Consult Sales  
Availability: 
 
 
Push-to-connect Flow Control valve (regulating out), M5 thread - 1/4" OD
All prices on this site are shown in Taiwan Dollars.
Note: Add suffix "-C" to model number if requesting spring closed configuration.
Ordering Example: (1) DPG-10M-2-C gripper, size 2, spring closed , configuration, TWD32,615
We noticed you are from the US. Visit your local site for regional offers and live support.