Tap Into Advanced Connectivity! Audit your temperature signals anytime, anywhere without interrupting the signal.
The new patented DRTB-2 Series
thermocouple terminal blocks are
manufactured with thermocouple-grade alloys
to guarantee accurate readings. A built-in
SMP-compatible female receptacle accepts
a miniature thermocouple connector. The
female connector allows the user to connect
to a handheld meter for applications such as
data collection, quality assurance compliance,
capability studies and trouble shooting
installation or repairs.
The plastic housing is made from gray
polyamide 6.6 thermoplastic resin with aUL 94 V0 rating for 85°C. These
thermocouple terminal blocks are fully
enclosed and require no end plates. The
screws are stainless steel and captive and
the wire clamps are made of tin plated brass.
Together they provide an excellent vibration,
maintenance free and corrosion resistant
DRTB-2 terminal blocks mount on standard
35 mm DIN rails or 32 mm G-type rails,
and are identified with calibration type and
positive (+) and negative (-) connections.
Wire entry is funneled to allow quick wire
insertion even with stranded wire.
SPECIFICATIONS Width: 10.7 mm (0.422") Length/Height: 52.8 mm (2.08")/42.3 mm (1.666") Installed Height to 35 x 7.5 mm 35 x 15 mm DIN Rail: 43.5 mm (1.713")/52.8 mm (2.08") Wire Gauge Ranges: 14-24 solid wire; 16-24 stranded wire Wire Strip Length: 8 mm (0.31") Torque in Nm (in-lb): 0.4 (3.54) ±10% Temperature Rating: -40 to 85°C (-40 to 185°F)
† All prices on this site are shown in Taiwan Dollars. Note: This item is available in single unit and multipack configurations. Ordering Example: (1) DRTB-K-2 Thermocouple terminal block, type K, TWD620 plus (1) HH806AU Handheld data logger/thermometer, TWD8,830 plus (1) RECK1-10 Type K retractable extension cable, 0.3 m (1') length, TWD715, TWD620 + 8,830 + 715 = TWD10,165