Portable Digital Ultrasonic Flow Meter Kit

FDT-25

^TWD61,127 FDT-25

PLACE ORDER

High Accuracy, better than 1%.
Wide Measurement Range from DN15~DN6000mm
Rechargeable Power Supply: Built-in high-capacity NiMH rechargeable batteries will last more than 10 hours (Fully charged).
Non invasion measurement, can achieve measurement with clamp on sensors
Data Storage: 32K BIT built-in data storage can store two thousand rows of data
LCD display can display the instant flow, total flow, flow velocity, and working condition
Reduces installation time, improves installation accuracy. Easy installation, no need cut the pipe, no pressure loss
Easy to install and no need to cut off the flow, no pressure loss
Different transducer from DN15~DN6000

Doppler/Transit-Time Ultrasonic Flow Meters - View related products

Description

The FDT-25 handheld ultrasonic flowmeter is designed to work with clamp-on transducers to enable the flow of a liquid within a closed pipe to be measured accurately without needing to insert any mechanical parts through the pipe wall or protrude into the flow system.

Using ultrasonic transit time techniques, the FDT-25 is controlled by a micro-processor system which contains a wide range of data that enables it to be used with pipes with an outside diameter ranging from 15mm up to 6000mm (depending on model) and constructed of almost any material. The instrument will also operate over a wide range of fluid temperatures.

FDT-25 comes complete with:
1 ea. Handheld Ultrasonic Flow Meter
2 ea. Standard Clamp on Transducers for Pipe Sizes 3/4" to 4"
2 ea. Transducer Chains
2 ea. Transducer Clamps
1 ea. 3M Ruler
1 ea. Acoustic gel for Standard Transducers
1 ea. Universal Power Adapter/Charger
1 ea. RS232 Computer Cable
Transducers for larger pipe sizes and extended temperature ranges are available in the Accessories Section for an additional charge.

Specifications:
Accuracy: ±1% of reading at rates >(0.2m/s) 0.6 ft/s
Repeatability: 0.2%
Linearity: 0.5%
Response Time: 0 to 999 seconds (user configured)
Velocity: (±32 m/s)
Media Temperature Range:
Standard Transducers: 0 to 90°C (32 to 194°F)
With High Temp Transducers: 0 to 160°C (32 to 320°F)
Operating Temperature: Meter, -20 to 60C (- 8 to 140F)
Operating Humidity: Meter, 85% RH
Pipe Size: DN 15 to 100 mm (0.75 to 4") standard [up to DN 6000 mm (236") with optional transducers]
Rate Units (User Configured): Meter, feet, cubic meter, cubic feet, USA gallon, liter, oil barrel, USA liquid barrel, imperial liquid barrel, million USA gallons
Totalizer: 7-digit totals for positive, negative and net flow
Liquid Types: Most liquids including clean water, sea water, waste water, chemical liquids, oil, crude oil, alcohol, beer, and more
Pipe Material: All metals, most plastics and fiberglass (Liner allowed)
Security: Setup values modification lockout. Access code needs unlocking.
Display: 4 x 16 English letters, 4 x 8 Chinese characters
Communications: RS232C (baud rate from 75 to 115,200 bps)
Transducer Cable Length: 5 m
Power: 3 "AAA" NiMH built-in batteries (included) with 100 to 240 VAC charger, fully charged lasts over 10 hrs.
Data Logger: Built-in, stores over 2000 lines of data
Totalizer/Calibration: 7-digit totals for net, positive and negative flow respectively press-to-go for calibration
Housing Material: ABS plastic with aluminum alloy protective carrying case
Case: (IP65)
Weight: 514 g (1.2lb)

(Specify Model Number)

Part Number/Desc.

Qty

Description

FDT-25

TWD61,127

Availability: 2 weeks

Handheld Ultrasonic Flow Meter Kit -- Three NiMH Rechargable Batteries Included. Kit includes Flow Meter, Small Standard Transducer, Transducer Cables, Chain, Clamp, Ruler, RS232 Cable (1 meter), Universal AC Power Adapter/Battery Charger, Acoustic gel for Standard Transducers

STD-HS

TWD13,119

Availability: 1 week

Standard Clamp on Transducer - Small (0 to 90C) Pipe Size DN15~DN100 (3/4" to 4")

STD-HM

TWD12,421

Availability: 5 weeks

Standard Clamp on Transducer - Medium (0 to 90C) Pipe Size DN50~DN700 (2" to 28")

STD-HL

TWD13,998

Availability: 5 weeks

Standard Clamp on Transducer - Large (0 to 90C) Pipe Size DN300~DN6000 (12" to 240")

HT-HS

TWD14,735

Availability: 5 weeks

Hi Temp Clamp on Transducer - Small (0 to 160C) Pipe Size DN15~DN100 (3/4" to 4")

HT-HM

TWD13,558

Availability: 1 week

Hi Temp Clamp on Transducer - Medium (0 to 160C) Pipe Size DN50~DN700 (2" to 28")

HT-HL

TWD15,684

Availability: 1 week

Hi Temp Clamp on Transducer - Large (0 to 160C) Pipe Size DN300~DN6000 (12" to 240")

STDGEL

TWD1,082

Availability: 1 week

Acoustic gel for Standard Transducers

HTGEL

TWD1,443

Availability: 18 weeks

Acoustic gel for High Temperature Transducers

FDT-25-5M

Consult Sales

Availability:

Replacement Transducer Cable (Red & Blue) 5Mx2

† All prices on this site are shown in Taiwan Dollars.