Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

Clamp-On Ultrasonic Flow for Liquids  - Discontinued

FDT-40 Series

Clamp-On Ultrasonic Flow for Liquids
 | FDT-40 Series

Clamp-On Ultrasonic Flow for Liquids

See All Models Below

CE
  • Bi-Directional Flow Measurement
  • Rugged, Aluminum Enclosure
  • Rate and Total Backlit Display
  • 4 to 20 mA and Dual Alarm Outputs
  • USB Programming Port
  • RS485 MODBUS® Network Connection

Description

Discontinued. Replaced by UFM-DQG-Series

.
FDT-40 Series ultrasonic flow and energy meters clamp on to the outside of pipes and do not come in contact with the internal liquid. The technology has inherent advantages over alternate devices including: low-cost installation, no pressure head loss, no moving parts to maintain or replace, no fluid compatibility issue, and a large, bi-directional measuring range that ensures reliable readings even at very low and high flow rates. FDT-40 Series is available in a variety of configurations that permit the user to select a meter with features suitable to meet particular application requirements.

Specifications
System
Liquid Types: Most clean liquids or liquids containing small amounts of suspended solids or gas bubbles
Velocity Range: Bi-directional to greater than 40 FPS (12 MPS)
Flow Accuracy:
    Larger Than 50 mm (2"): ±1% of reading or ±0.01 FPS (0.003 MPS), whichever is greater
    25 to 50 mm (1 to 2"): ±1% of reading or ±0.04 FPS (0.012 MPS), whichever is greater
¾" (19 mm) and Smaller: ±1% of full scale
Sensitivity Flow: 0.001 FPS (0.0003 MPS)
Repeatability: 0.5% of reading
Transmitter
Power Requirements (AC): 95 to 264 Vac 47 to 63 Hz @ 17 VA maximum standard, 20 to 28 Vac 47 to 63 Hz @ 0.35 A maximum (“-24VAC” models), 10 to 28 Vdc @ 5 W maximum (“-VDC” models)
Protection: Auto resettable fuse, reverse polarity and transient suppression
Display: Two line LCD, LED backlit; top row 18 mm (0.7") height, 7-segment; bottom row 9 mm (0.35") height, 14-segment
Icons: RUN, PROGRAM, RELAY1, RELAY2
Flow Rate Indication: 8-digit positive, 7-digit negative maximum; auto decimal, lead zero blanking
Flow Totalizer: 8-digit positive, 7-digit negative maximum (re-set via keypad press, software, network command or momentary contact closure
Enclosure NEMA 4 (IP65) Construction: Powder-coated aluminum, polycarbonate, stainless steel, polyurethane, nickel-plated steel mounting brackets
Size (Electronic Enclosure Only): 152 W x 112 H x 56 mm D (6.0 x 4.4 x 2.2")
Conduit Holes: (2) ½ NPT female (1) ¾ NPT female
Temperature: -40 to 85°C (-40 to 185°F)
Configuration: Via optional keypad or PC running software (Note: not all configuration parameters are available from the keypad – i.e. flow and temperature calibration and advanced filter settings)
Engineering Units Flow Meter: Feet, gallons, cubic feet, million gallons, barrels (liquid and oil), acre-feet, lbs, meters, cubic meters, liters, million liters, kg
Inputs/Outputs USB 2.0: For connection of a PC running configuration utility
    RS485: MODBUS RTU command set
    4 to 20 mA: 12-bit, internal power, can span negative to positive flow/ energy rates
    0 to 1000 Hz: Open-collector, 12-bit, can span negative to positive rates; square-wave or turbine meter simulation outputs
Two Alarm Outputs: Open-collector, configure as rate alarm, signal strength alarm or totalizer pulse
Transducers
Construction
    Standard (FDT-41 thru 46): NEMA 6 (IP67), PVC, PEI, Nylon cord grip, PVC cable jacket
    Temperature: -40 to 60°C (-40 to 140°F)
    FDT-41 thru 46 with “-HT” option, FDT-47 and FDT-48: NEMA 6 (IP67), CPVC, PEI, Nylon cord grip, PVC cable jacket
    Temperature: -40 to 90°C (-40 to 194°F)
    FDT-47 “-HT”: NEMA 6 (IP67), PTFE, polyimide, Nickel-plated brass cord grip, PFA cable jacket
    Temperature: -40 to 176°C (-40 to 350°F)
Frequency:
    FDT41 thru 46: 2 MHz
    FDT-47: 1 MHz
    FDT-48: 500 KHz
Cables: RG59 coaxial, 75 Ω or twin axial, 78 Ω (optional armored conduit)
Cable Length: Standard 6 m (20') 300 m (990') maximum in 3 m (10') increments Software Utilities Utilized to configure, calibrate and troubleshoot flowmeters. Connection via USB A/B cable; software is compatible with Windows 2000, Windows XP, Windows Vista® and Windows® 7
RS485 Network All FDT-40 meters come equipped with RS485 drivers and utilize a MODBUS RTU command set (data can be returned in single-precision, doubleprecision, integer or floating point values). Up to 126 units products can be run on a single daisy-chain network and be individually queried for flow rate, positive flow accumulator, negative flow accumulator and signal strength. Flow accumulators can be cleared at discrete addresses or globally. The RS485 network is also compatible with direct to Excel, application.
(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
FDT-40
FDT-40
Consult Sales  
Availability: 
 
 
Flowmeter display 95 to 264 Vac
FDT-40-VDC
FDT-40-VDC
Consult Sales  
Availability: 
 
 
Flowmeter display 10 to 28 Vdc
  
FDT-40-24VAC
TWD95,490
Availability: 5 weeks
 
Flowmeter display 24 Vac
Accessory Remote Transducers (Display Sold Separately)
Remote Transducers for ANSI Pipe
  
FDT-41-ANSI
Consult Sales  
Availability: 
 
 
Transducer for 1/2" ANSI pipe
  
FDT-42-ANSI
TWD25,620
Availability: 1 week
 
Transducer for 3/4" ANSI pipe
  
FDT-43-ANSI
Consult Sales  
Availability: 
 
 
Transducer for 1" ANSI pipe
  
FDT-44-ANSI
Consult Sales  
Availability: 
 
 
Transducer for 1 1/4" ANSI pipe
  
FDT-45-ANSI
Consult Sales  
Availability: 
 
 
Transducer for 1 1/2" ANSI pipe
  
FDT-46-ANSI
Consult Sales  
Availability: 
 
 
Transducer for 2" ANSI pipe
  
FDT-41-ANSI-100FT
Consult Sales  
Availability: 
 
 
Transducer for 1/2" ANSI pipe with 100 ft of cable
  
FDT-42-ANSI-100FT
Consult Sales  
Availability: 
 
 
Transducer for 3/4" ANSI pipe with 100 ft of cable
  
FDT-43-ANSI-100FT
Consult Sales  
Availability: 
 
 
Transducer for 1" ANSI pipe with 100 ft of cable
  
FDT-44-ANSI-100FT
Consult Sales  
Availability: 
 
 
Transducer for 1 1/4" ANSI pipe with 100 ft of cable
  
FDT-45-ANSI-100FT
Consult Sales  
Availability: 
 
 
Transducer for 1 1/2" ANSI pipe with 100 ft of cable
  
FDT-46-ANSI-100FT
Consult Sales  
Availability: 
 
 
Transducer for 2" ANSI pipe with 100 ft of cable
  
FDT-41-ANSI-HT
TWD45,845
Availability: 7 weeks
 
High temperature transducer for 1/2" ANSI pipe
  
FDT-42-ANSI-HT
TWD45,845
Availability: 7 weeks
 
High temperature transducer for 3/4" ANSI pipe
  
FDT-43-ANSI-HT
TWD48,440
Availability: 7 weeks
 
High temperature transducer for 1" ANSI pipe
  
FDT-44-ANSI-HT
TWD48,440
Availability: 7 weeks
 
High temperature transducer for 1 1/4" ANSI pipe
  
FDT-45-ANSI-HT
TWD48,440
Availability: 7 weeks
 
High temperature transducer for 1 1/2" ANSI pipe
  
FDT-46-ANSI-HT
TWD51,410
Availability: 7 weeks
 
High temperature transducer for 2" ANSI pipe
  
FDT-41-ANSI-HT-100FT
TWD56,705
Availability: 7 weeks
 
High temperature transducer for 1/2" ANSI pipe and 100 ft of cable
  
FDT-42-ANSI-HT-100FT
TWD56,705
Availability: 7 weeks
 
High temperature transducer for 3/4" ANSI pipe with 100 ft of cable
  
FDT-43-ANSI-HT-100FT
TWD58,810
Availability: 7 weeks
 
High temperature transducer for 1" ANSI pipe and 100 ft of cable
  
FDT-44-ANSI-HT-100FT
TWD58,810
Availability: 7 weeks
 
High temperature transducer for 1 1/4" ANSI pipe and 100 ft of cable
  
FDT-45-ANSI-HT-100FT
TWD58,810
Availability: 7 weeks
 
High temperature transducer for 1 1/2" ANSI pipe and 100 ft of cable
  
FDT-46-ANSI-HT-100FT
TWD60,840
Availability: 7 weeks
 
High temperature transducer for 2" ANSI pipe and 100 ft of cable
Remote Transducers for Copper Pipe (Display Sold Separately)
  
FDT-41-CP
Consult Sales  
Availability: 
 
 
Transducer for 1/2" Copper pipe
  
FDT-42-CP
TWD25,620
Availability: 1 week
 
Transducer for 3/4" Copper pipe
  
FDT-43-CP
Consult Sales  
Availability: 
 
 
Transducer for 1" Copper pipe
  
FDT-44-CP
Consult Sales  
Availability: 
 
 
Transducer for 1 1/4" Copper pipe
  
FDT-45-CP
Consult Sales  
Availability: 
 
 
Transducer for 1 1/2" Copper pipe
  
FDT-46-CP
Consult Sales  
Availability: 
 
 
Transducer for 2" Copper pipe
  
FDT-41-CP-100FT
Consult Sales  
Availability: 
 
 
Transducer for 1/2" Copper pipe with 100 ft of cable
  
FDT-42-CP-100FT
Consult Sales  
Availability: 
 
 
Transucer for 3/4" Copper pipe with 100 ft of cable
  
FDT-43-CP-100FT
Consult Sales  
Availability: 
 
 
Transducer for 1" Copper pipe with 100 ft of cable
  
FDT-44-CP-100FT
Consult Sales  
Availability: 
 
 
Transducer for 1 1/4" Copper pipe with 100 ft of cable
  
FDT-45-CP-100FT
Consult Sales  
Availability: 
 
 
Transducer for 1 1/2" Copper pipe with 100 ft of cable
  
FDT-46-CP-100FT
Consult Sales  
Availability: 
 
 
Transducer for 2" Copper piep with 100 ft of cable
  
FDT-41-CP-HT
TWD45,845
Availability: 7 weeks
 
High temperature transducer for 1/2" Coper pipe
  
FDT-42-CP-HT
TWD45,845
Availability: 7 weeks
 
High temperature transducer for 3/4" Copper pipe
  
FDT-43-CP-HT
TWD48,440
Availability: 7 weeks
 
High temperature transducer for 1" Copper pipe
  
FDT-44-CP-HT
TWD48,440
Availability: 7 weeks
 
High temperature transducer for 1 1/4" Copper pipe
  
FDT-45-CP-HT
TWD48,440
Availability: 7 weeks
 
High temperature transducer for 1 1/2" Copper pipe
  
FDT-46-CP-HT
TWD51,410
Availability: 7 weeks
 
High temperature transducer for 2" Copper pipe
  
FDT-41-CP-HT-100FT
TWD56,705
Availability: 7 weeks
 
High temperature transducer for 1/2" Coper pipe with 100 ft of cable
  
FDT-42-CP-HT-100FT
TWD56,705
Availability: 7 weeks
 
High temperature transducer for 3/4" Coper pipe with 100 ft of cable
  
FDT-43-CP-HT-100FT
TWD58,810
Availability: 7 weeks
 
High temperature transducer for 1" Coper pipe with 100 ft of cable
  
FDT-44-CP-HT-100FT
TWD58,810
Availability: 7 weeks
 
High temperature transducer for 1 1/4" Coper pipe with 100 ft of cable
  
FDT-45-CP-HT-100FT
TWD58,810
Availability: 7 weeks
 
High temperature transducer for 1 1/2" Coper pipe with 100 ft of cable
  
FDT-46-CP-HT-100FT
TWD60,840
Availability: 7 weeks
 
High temperature transducer for 2" Coper pipe with 100 ft of cable
Remote Transducers for Tubing (Display Sold Separately)
  
FDT-41-TUBE
Consult Sales  
Availability: 
 
 
Transducer for 1/2" tubing
  
FDT-42-TUBE
Consult Sales  
Availability: 
 
 
Transducer for 3/4" tubing
  
FDT-43-TUBE
Consult Sales  
Availability: 
 
 
Transducer for 1" tubing
  
FDT-44-TUBE
Consult Sales  
Availability: 
 
 
Transducer for 1 1/4" tubing
  
FDT-45-TUBE
Consult Sales  
Availability: 
 
 
Transducer for 1 1/2" tubing
  
FDT-46-TUBE
Consult Sales  
Availability: 
 
 
Transducer for 2" tubing
  
FDT-41-TUBE-100FT
Consult Sales  
Availability: 
 
 
Transducer for 1/2" tubing with 100 ft of cable
  
FDT-42-TUBE-100FT
Consult Sales  
Availability: 
 
 
Transducer for 3/4" tubing with 100 ft of cable
  
FDT-43-TUBE-100FT
Consult Sales  
Availability: 
 
 
Transducer for 1" tubing with 100 ft of cable
  
FDT-44-TUBE-100FT
Consult Sales  
Availability: 
 
 
Transducer for 1 1/4" tubing with 100 ft of cable
  
FDT-45-TUBE-100FT
TWD43,030
Availability: 7 weeks
 
Transducer for 1 1/2" tubing with 100 ft of cable
  
FDT-46-TUBE-100FT
Consult Sales  
Availability: 
 
 
Transducer for 2" tubing with 100 ft of cable
  
FDT-41-TUBE-HT
TWD45,845
Availability: 7 weeks
 
High temperature transducer for 1/2" tubing
  
FDT-42-TUBE-HT
TWD45,845
Availability: 7 weeks
 
High temperature transducer for 3/4" tubing
  
FDT-43-TUBE-HT
TWD48,440
Availability: 5 weeks
 
High temperature transducer for 1" tubing
  
FDT-44-TUBE-HT
TWD48,440
Availability: 7 weeks
 
High temperature transducer for 1 1/4" tubing
  
FDT-45-TUBE-HT
TWD48,440
Availability: 7 weeks
 
High temperature transducer for 1 1/2" tubing
  
FDT-46-TUBE-HT
TWD51,410
Availability: 5 weeks
 
High temperature transducer for 2" tubing
  
FDT-41-TUBE-HT-100FT
TWD56,705
Availability: 7 weeks
 
High temperature transducer for 1/2" tubing with 100 ft of cable
  
FDT-42-TUBE-HT-100FT
TWD56,705
Availability: 7 weeks
 
High temperature transducer for 3/4" tubing with 100 ft of cable
  
FDT-43-TUBE-HT-100FT
TWD58,810
Availability: 7 weeks
 
High temperature transducer for 1" tubing with 100 ft of cable
  
FDT-44-TUBE-HT-100FT
TWD58,810
Availability: 7 weeks
 
High temperature transducer for 1 1/4" tubing with 100 ft of cable
  
FDT-45-TUBE-HT-100FT
TWD58,810
Availability: 7 weeks
 
High temperature transducer for 1 1/2" tubing with 100 ft of cable
  
FDT-46-TUBE-HT-100FT
TWD60,840
Availability: 7 weeks
 
High temperature transducer for 2" tubing with 100 ft of cable
Remote Transducers (Display Sold Separately)
FDT-47
FDT-47
TWD38,368
Availability: 1 week
 
Transducer for 2 to 24" pipe
  
FDT-47-100FT
TWD49,080
Availability: 5 weeks
 
Transducer for 2 to 24" pipe with 100 ft of cable
  
FDT-47-HT
TWD150,315
Availability: 7 weeks
 
High temperature transducer for 2 to 24" pipe
  
FDT-47-HT-100FT
TWD160,990
Availability: 7 weeks
 
High temperature transducer for 2 to 24" pipe with 100 ft of cable
  
FDT-48
TWD61,594
Availability: 7 weeks
 
Transducer for pipes over 24"
  
FDT-48-100FT
TWD72,415
Availability: 7 weeks
 
Transducer for pipes over 24" with 100 ft of cable
Accessories
  
FDT-40-PC-CABLE
TWD2,800
Availability: 5 weeks
 
Optional USB PC programming cable
  
FDT-40-CABLE GLAND
TWD1,465
Availability: 1 week
 
Optional cable gland
  
FDT-40-BHC
TWD3,880
Availability: 4 weeks
 
Brad Harrison connector for the FDT-40
FDT-GREASE
FDT-GREASE
TWD2,862
Availability: 1 week
 
Replacement acoustic couplant 150 g (5.3 oz)
  
FDT-HT-GREASE
TWD6,430
Availability: 1 week
 
High temperature acoustic couplant 56 g (2 oz)
FDT-NS-GREASE
FDT-NS-GREASE
TWD2,860
Availability: 5 weeks
 
Non-silicone acoustic couplant 79 g (2.8 oz)
All prices on this site are shown in Taiwan Dollars.
Note: FDT-40 Series Flowmeters come complete with operator’s manual.

Accessory transducers come complete with mounting gel.


Option Descriptions:


(1) Pipe and Tubing Sizes select from:
41 for 1/2 Inch
42 for 3/4 Inch
43 for 1 Inch
44 for 1 1/4 Inch
45 for 1 1/2 Inch
46 for 2 Inch
47 for 2 to 24 Inch
48 for Pipes over 24 inch

(2) Pipe and Tubing Material select from:
ANSI for ANSI pipe
CP for Copper pipe
TUBE for Plastic tubing

(3) High Temperature select from:
Nothing(leave field blank) for None
-HT for High temp transducers

(4) Cable Length select from:
Nothing(leave field blank) for Standard 6 m (20 feet)
-100FT for 30 m (100 feet)
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.