Cart  |  Contact  |  Help  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

Hot Water Meters for Totalization and Rate Indication with Pulse Output

FTB8000HW Series

Hot Water Meters for Totalization and Rate Indication with Pulse Output | FTB8000HW Series

TWD6,475 FTB8007HW

  • Flow Rates from 0.22 to 132 GPM
  • 150 psi Maximum Operating Pressure
  • 90°C (194°F) Maximum Operating Temperature
  • Field-Adjustable Pulse Output (Optional)
Turbine, Paddle Wheel & Positive Displacement Flow Meters - View related products

Description

The FTB8000HW Series meters use the multi-jet principle, which has been an internationally accepted standard for many years. This type of meter is known for its wide range, simplicity, and accuracy in lowquality water. The impeller is centered in a ring of jets, with inlet jets on one level and outlet jets on another. A gear train drives the register totalizer dials. For pulse output, one of the dials is replaced by a gear, which turns a magnet that is detected by an encapsulated sensor threaded into the outside of the lens. Pulse rate is determined by the gear and the dial on which the gear is placed. Changing the pulse rate requires no special tools and can be done in the field.

Mechanically, all FTB8000HW meters are the same. The difference between the -PR, -PT, and standard models is in the sensor. -PR model meters use a solid state, longlasting Hall-effect sensor, which requires power. -PT model meters use a 2-wire reed switch. They provide a dry-contact closure and do not require power. Basic FTB8000HW meters totalize only and do not have an output. Never install water meters above or over areas where leakage would cause damage.

SPECIFICATIONS
Materials:
    Body: Cast bronze
    Internals: Engineered thermoplastic
    Magnet: Permanent ceramic
Max Temperature: 90°C (194°F)
Max Operating Pressure: 150 psi
Accuracy: 1.5% of reading
Sensor:
    -PR: Hall-effect device
    -PT: Reed switch
Max Current: 20 mA
Max Voltage:
    -PR: 24 Vdc
    -PT: 24 Vdc or Vac
Sensor Power (-PR): Minimum 6 mA at 12 Vdc
Cable Length: 4 m (12') standard, 600 m (2000') max
Flow Rates (GPM):
NPT Size ¾ 1 2
Minimum 0.22 0.44 0.88 1.98
Maximum 22 52 88 132
(Specify Model Number)
Part Number/Desc.
Qty
Description
Quick Ship
FTB8007HW
TWD6,475
Availability: 1 week
 
3/4NPT, 0.22 to 22 GPM, total only
Quick Ship
FTB8010HW
TWD11,330
Availability: 5 weeks
 
1NPT, 0.44 to 52 GPM, total only
Quick Ship
FTB8015HW
TWD22,060
Availability: 5 weeks
 
1 1/2NPT, 0.88 to 88 GPM, total only
Quick Ship
FTB8020HW
TWD33,915
Availability: 5 weeks
 
2NPT, 1.98 to 132 GPM, total only
Quick Ship
FTB8007HW-PT
TWD7,790
Availability: 1 week
 
3/4NPT, 0.22 to 22 GPM, 20 Pulse/gallon
Quick Ship
FTB8010HW-PT
TWD12,685
Availability: 1 week
 
1NPT, 0.44 to 52 GPM, 1 Pulse/gallon
Quick Ship
FTB8015HW-PT
TWD23,375
Availability: 5 weeks
 
1 1/2NPT, 0.88 to 88 GPM, 1 Pulse/gallon
Quick Ship
FTB8020HW-PT
TWD35,270
Availability: 1 week
 
2NPT, 1.98 to 132 GPM, 1 Pulse/gallon
Quick Ship
FTB8007HW-PR
TWD8,055
Availability: 5 weeks
 
3/4NPT, 0.22 to 22 GPM, 1 Pulse/gallon
Quick Ship
FTB8010HW-PR
TWD13,440
Availability: 5 weeks
 
1NPT, 0.44 to 52 GPM, 1 Pulse/gallon
Quick Ship
FTB8015HW-PR
TWD25,185
Availability: 5 weeks
 
1 1/2NPT, 0.88 to 88 GPM, 1 Pulse/gallon
Quick Ship
FTB8020HW-PR
TWD38,410
Availability: 5 weeks
 
2NPT, 1.98 to 132 GPM, 1 Pulse/gallon
All prices on this site are shown in Taiwan Dollars.
Note: Comes with 2 MNPT couplings (already installed), 4m (12') cable, and complete operator’s manual. Only units that have an output signal (-PR or -PT) come with a cable.