Cart  |  Contact  |  Help  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

3-A Certified Sanitary Clamp High Temperature Turbine Meters

G-Series 3-A

3-A Certified Sanitary Clamp High Temperature Turbine Meters | G-Series 3-A

TWD60,165 GSCPS-100

  • Meets 3-A Sanitary Standards
  • Meets CIP, SIP, COP requirements
  • Meter includes a traditional design
  • Available in a variety of sizes
  • Low Profile option available
  • ORDERING INSTRUCTIONS: Step 1, Select Flow Meter.  Step 2, Select A Magnetic Pick-up from Accessories.  Step 3,Select Cable if Required from Accessories.
Turbine, Paddle Wheel & Positive Displacement Flow Meters - View related products

Description

The G-Series High Temperature Sanitary Turbine Flowmeters are volumetric flow measurement devices. The moving fluid is used to turn a rotor, which is suspended in the flow stream. The rotating speed of the rotor is proportional to the fluid velocity or flowrate. As the blades from a spinning rotor pass by a magnetic sensor, an AC voltage pulse is generated and transmitted to the readout instrument. Each pulse is equal to a given volume of liquid therefore “x” number of pulses are equal to a gallon, litre, pound, barrel, etc.

Select a Magnetic Pick-up from The Table

Selection Guide for 1 in. 1-1/2., 2 in. Turbine Meters

Magnetic Pickup type Part No. Application Cable Type

Wire Lead Standard

81003000

Meter mount electronics. Temperature range: -100°F to +250°F. Sine wave output.

None

Herm/High Temp.

81002000

Remote mount electronics. Temperature range: -450°F to +258°F. Sine wave output.

T

High Temp. Standard

81007000

Remote mount electronics. Temperature range: -450°F to +800°F. Sine wave output.

T

Active Digital

81004000

Remote mount electronics. Temperature range: -40°F to +248°F. Square wave, open collector output, 5-32 VDC required. Signal output: 0-10V, NPN

D

(Specify Model Number)
Part Number/Desc.
Qty
Description
GSCPS-100
TWD60,165
Availability: 1 week
 
1" SS Hi Temp CIP Turbine Flow Meter w/ 1-1/2" Tri-Clamp
GSCPS-150
TWD65,030
Availability: 1 week
 
1-1/2" SS Hi Temp CIP Turbine Flow Meter w/ 1-1/2" Tri-Clamp
GSCPS-200
TWD71,860
Availability: 1 week
 
2" SS Hi Temp CIP Turbine Flow Meter w/ 2-1/2" Tri Clamp
Accessories
81003000
TWD4,225
Availability: 1 week
 
LEAD WIRE PICKUP FOR LOCAL DISPLAY-NO CABLE REQUIRED
81002000
TWD7,300
Availability: 1 week
 
HERMETICALLY SEALED PICKUP SINE WAVE OUTPUT-SELECT A TYPE T CABLE
81007000
TWD29,270
Availability: 1 week
 
HIGH TEMP PICKUP SINE WAVE OUTPUT-SELECT A TYPE T CABLE
81004000
TWD13,655
Availability: 1 week
 
DIGITAL PICKUP PNP PULSE OUTPUT-SELECT A TYPE D CABLE
83004005
TWD3,515
Availability: 1 week
 
TYPE T HIGH TEMP CABLE 5FT
83004010
TWD3,855
Availability: 1 week
 
TYPE T HIGH TEMP CABLE 10FT
83004020
TWD4,530
Availability: 1 week
 
TYPE T HIGH TEMP CABLE 20FT
83002005
TWD3,145
Availability: 1 week
 
TYPE D DIGITAL CABLE 5FT
83002010
TWD3,345
Availability: 1 week
 
TYPE D DIGITAL CABLE 10FT
83002020
TWD3,720
Availability: 1 week
 
TYPE D DIGITAL CABLE 10FT
All prices on this site are shown in Taiwan Dollars.
We noticed you are from the US. Visit your local site for regional offers and live support.