Mini Vacuum Desiccator

LAB-410990000

See All Models Below

Interior Volume: 0.015 Cu. Ft.
Vacuum Rating of 740 mm Hg (29")
Clear Polycarbonate Top; White Polypropylene Bottom
Stopcock with 2 mm (0.08") ptfe Plug Uses 6 mm (1⁄4") Tubing
Peripheral Flange Around the Bottom Fits Into Two Snap Locks and Seals the Two Halves Against a Buna-O-Ring

Description

The top section of this laboratory vacuum desiccator is clear, molded polycarbonate for observation from any angle. A polypropylene stopcock with a PTFE plug allows gentle air entrance when releasing vacuum. A peripheral flange around the bottom section fits into two snap locks sealing the two halves against a Buna-N O-ring. A polypropylene stopcock with 2mm bore PTFE plug extends from the top center; the bottom section is polypropylene. Vacuum retention rating is 740mm Hg (29"). Interior dimensions are 102mm (4") diameter x 59mm (27/16") high. The base is 175mm (67/8") diameter. In less than 12" of bench-top space, these strong, shatter resistant desiccators will store and protect sensitive products.