Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

Air Temperature RTD Probe with M12 Connector

PR-25AP series

Air Temperature RTD Probe with M12 Connector | PR-25AP series

Air Temperature RTD Probe with M12 Connector

TWD7,340 PR-25AP-A-1200-0-M12

  • Pt100 Wire Wound RTD with Class A Accuracy Standard (Tighter Accuracy Options Available)
  • Resistance vs. Temperature and Accuracy per IEC 60751
  • Temperature Range: -100 to 250°C (-148 to 500ºF)
  • Probe Will Withstand 400 psi (27.6 bar) Differential Pressure Between Airstream and Ambient Conditions
  • 316L Stainless Steel Probe and Housing with Vent Holes Around Element
  • M12, 4-Pin, A-Coded Plug Connector for Easy Installation
  • Available With or Without NPT Mounting Threads
  • Non-Threaded Probe Can be Used with Optional Handle for Hand-Held Measurements
  • Wide Selection of M12 Extension Cables Available.
RTD (PT100)  Probes, Elements and Assemblies - View related products

Description

Our PR-25AP RTD Air Probe combines the availability of the high accuracy sensor options found in our Ultra-Precise RTD probes with the convenience and reliability of our M12 enabled PR-21 probes. The PR-25AP offers RTD accuracies of Class A, AA (formerly 1/3DIN) and 1/10DIN sensing elements with the ease and reliability of the M12 connection.

The PR-25AP RTD is also designed to provide a barrier to airflow between the air stream and the ambient conditions that has been tested to 400 psi with no leakage. The probe is constructed with a 316L stainless steel housing and sheath for strength and corrosion resistance. For ease of mounting, the PR-25AP is available with the following mounting thread options:
  • 1/2NPT
  • 3/8NPT
  • 1/4NPT
  • Non-Threaded Housing


  • The mounting thread options above allow the probes to be used in a wide variety of applications, including:
  • As stand-alone immersion sensors.
  • Installed directly into your product or process using an NPT threaded port.
  • The non-threaded design can be combined with our M12-Handle accessory to convert it for hand-held sensing applications.
  • Other applications using a variety of available compression fittings or other accessories.


  • The PR-25AP, like all of our M12 enabled probes, comes standard with a 4-wire, 4-pin, M12 A-Coded plug connector for easy assembly to extension cables. This allows it to be used in any 2, 3 or 4-wire measurement system for maximum flexibility. For 1/10DIN accuracy we highly recommend using a 4-wire measurement to take maximum advantage of the tight accuracy option.


    When ordering your PR-25AP sensor, don't forget your extension cable. Omega offers a wide selection of extension cables including over molded PVC, Polyurethane and Silicone cables, as well as customized cables in a variety of materials with optional stainless steel braid or hose for improved mechanical protection, and a wide selection of instrument connections.

    Connect your PR-25AP RTD sensor to one or more of Omega's wide variety of in-stock controllers, data loggers, transmitters, hand held thermometers, PLCs, or other measurement & control products to complete your measurement or control system. Omega offers a selection of programmable and fixed range transmitters that can be connected directly to the M12 connection of your PR-25AP sensor. There are also wireless transmitter options available.

    Specifications:
  • Metal Parts: 316L Stainless Steel Sheath and Housing.
  • Connector: 4-Pin "A"-Coded M12 Plug Connector
  • Standard Mounting Threads: 1/2NPT, 3/8NPT, 1/4NPT, and Non-Threaded
  • Standard Probe Diameter: 1/4"
  • Standard Probe Lengths: 6", 12” and 18”
  • Sensor: Pt100 (100 Ohms at 0°C, .00385 TCR (alpha)) per IEC 60751
  • Accuracy: Class A, AA (formerly 1/3DIN) per IEC 60751 and 1/10DIN
  • Temperature Range: -50 to 250°C Except for the Connector Which is 85°C Max
  • Insulation Resistance: 100 Megohms Minimum at 100VDC at Room Ambient

  • (Specify Model Number)

    What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

    Part Number/Desc.
    Qty
    Description
    Pt100, Class A Accuracy Probes
      
    PR-25AP-A-0600-0-M12
    TWD6,494
    Availability: 7 weeks
     
    6" Long, No Mounting Thread
      
    PR-25AP-A-1800-0-M12
    TWD7,245
    Availability: 7 weeks
     
    18" Long, No Mounting Thread
      
    PR-25AP-A-0600-1/2-M12
    TWD6,495
    Availability: 7 weeks
     
    6" Long, 1/2 NPT Mounting Thread
      
    PR-25AP-A-0600-1/4-M12
    TWD6,494
    Availability: 1 week
     
    6" Long, 1/4 NPT Mounting Thread
      
    PR-25AP-A-1800-1/4-M12
    TWD7,245
    Availability: 7 weeks
     
    18" Long, 1/4 NPT Mounting Thread
    Extension Cables and Accessories
    M12CM-T24SSPC-SF-2
    M12CM-T24SSPC-SF-2
    TWD2,399
    Availability: 6 weeks
     
    2 meter (6.5 foot) Long FEP Cable with a Straight Female Over Molded LCP Connector and Stripped Leads
      
    M12CM-T24SSPC-SF-5
    TWD3,094
    Availability: 1 week
     
    5 meter (16.4 foot) Long FEP Cable with a Straight Female Over Molded LCP Connector and Stripped Leads
      
    M12CM-T24SSPC-SF-15
    TWD4,950
    Availability: 6 weeks
     
    15 meter (49 foot) Long FEP Cable with a Straight Female Over Molded LCP Connector and Stripped Leads
      
    M12CM-T24SSPC-RF-2
    TWD2,399
    Availability: 6 weeks
     
    2 meter (6.5 foot) Long FEP Cable with a Right Angled Female Over Molded LCP Connector and Stripped Leads
      
    M12CM-T24SSPC-RF-5
    TWD2,929
    Availability: 6 weeks
     
    5 meter (16.4 foot) Long FEP Cable with a Right Angled Female Over Molded LCP Connector and Stripped Leads
      
    M12CM-T24SSPC-RF-10
    TWD3,805
    Availability: 6 weeks
     
    10 meter (33 foot) Long FEP Cable with a Right Angled Female Over Molded LCP Connector and Stripped Leads
      
    M12CM-T24SSPC-RF-15
    TWD4,950
    Availability: 1 week
     
    15 meter (49 foot) Long FEP Cable with a Right Angled Female Over Molded LCP Connector and Stripped Leads
    M12C-PUR-4-S-F-2
    M12C-PUR-4-S-F-2
    TWD749
    Availability: 4 weeks
     
    Extension Cable, 4-Wire Polyurethane Insulated, 2 meters (6.5') Long With Flying Leads One End
    M12C-PUR-4-S-F-5
    M12C-PUR-4-S-F-5
    TWD913
    Availability: 1 week
     
    Extension Cable, 4-Wire Polyurethane Insulated, 5 meters (16.4') Long With Flying Leads One End
    M12C-PVC-4-S-F-5
    M12C-PVC-4-S-F-5
    TWD834
    Availability: 1 week
     
    Extension Cable, 4-Wire PVC Insulated, 5 meters (16.4') Long With Flying Leads One End
      
    M12C-SIL-4-S-F-1.5
    TWD610
    Availability: 1 week
     
    M12 Extension Cable, Silicone Insulated Cable wth Straight Socket Style Connector One End, Stripped Leads the Other, 1.5m Long
      
    M12C-SIL-4-S-F-5
    TWD931
    Availability: 1 week
     
    M12 Extension Cable, Silicone Insulated Cable wth Straight Socket Style Connector One End, Stripped Leads the Other, 5m Long
      
    M12C-SIL-4-S-F-10
    TWD1,510
    Availability: 1 week
     
    M12 Extension Cable, Silicone Insulated Cable wth Straight Socket Style Connector One End, Stripped Leads the Other, 10m Long
      
    M12CFM-P24STPC-SFSR-FL-3
    TWD1,905
    Availability: 1 week
     
    M12 Extension Cable, PVC Insulated with Straight Socket Connector One End, Stripped Leads the Other, 3m Long
      
    M12CFM-P24STPC-SFSR-FL-10
    TWD2,575
    Availability: 1 week
     
    M12 Extension Cable, PVC Insulated with Straight Socket Connector One End, Stripped Leads the Other, 10m Long
      
    M12CFM-T24SSPC-SFSR-FL-3
    TWD2,090
    Availability: 6 weeks
     
    M12 Extension Cable, FEP Insulated with Straight Socket Connector One End, Stripped Leads the Other, 3m Long
      
    M12CFM-T24SSPC-SFSR-FL-5
    TWD2,365
    Availability: 1 week
     
    M12 Extension Cable, FEP Insulated with Straight Socket Connector One End, Stripped Leads the Other, 5m Long
      
    M12-Handle-A
    TWD3,735
    Availability: 4 weeks
     
    Handle Accessory
    TX-M12-RTD-C-1
    TX-M12-RTD-C-1
    Consult Sales  
    Availability: 
     
     
    Miniature Programmable Temperature Transmitter (4 to 20mA Output) with M12 Connections
      
    TX-M12-RTD-V-1
    Consult Sales  
    Availability: 
     
     
    Miniature Programmable Temperature Transmitter (0 to 10VDC Output) with M12 Connections
      
    SPRTX-SS1-M12-1
    TWD7,440
    Availability: 6 weeks
     
    4-20 milliamp Transmitter in Mating M12 Connector with Extension Cable, Range -99 to 208°C (-146 to 406°F)
      
    BRLK-14-18
    TWD435
    Availability: 1 week
     
    Brass Compression Fitting, 1/8NPT Thread for 1/4" Probe
    SSLK-14-18
    SSLK-14-18
    TWD840
    Availability: 1 week
     
    Stainless Steel Compression Fitting, 1/8NPT Thread for 1/4" Probe
    All prices on this site are shown in Taiwan Dollars.
    Note: For 1/3 DIN accuracy, change “-A-” to “-1/3-” after the “-25AP-” in the model number and add $9 to price. For 1/10 DIN accuracy, change “-A-” to “-1/10-” after the “-25AP-” in the model; number and add $36.50 to price. A limited selection of Pt1000 elements are available, please consult sales.
    Ordering Example: (1) PR-25AP-A-0600-0-M12 Air Probe, Pt100, Class A, 6, TWD6,494  plus (1) PR-25AP-A-1200-1/2-M12 Air Probe, Pt100, Class A, 12, TWD6,825, TWD6,494 + 6,825 = TWD13,319

    Option Descriptions:


    (1) Accuracy select from:
    A for Class A
    1/3 for Class AA (Formerly 1/3DIN)
    1/10 for 1/10DIN

    (2) Probe Length select from:
    0600 for 6" Long
    1200 for 12" Long
    1800 for 18" Long

    (3) Mounting Thread select from:
    0 for No Thread
    1/2 for 1/2NPT Thread
    3/8 for 3/8NPT Thread
    1/4 for 1/4NPT Thread
    Note: All combinations may not be valid, check spec sheet for valid part numbers.
    We noticed you are from the US. Visit your local site for regional offers and live support.