Vibration Resistant and Bendable RTD (Pt100) Probes with M12 Connector and Mounting Threads (Metric Sizes)

PR-26 Metric Series

^TWD6,220 PR-26A-3-100-A-M6-0150-M12-1

Operating Temperature Range: -50 to 500°C (-58 to 932°F) Sensing End, -50 to 250°C (-58 to 482°F) at Connector
All Welded 316L Stainless Steel Housing and Probe
Available With or Without a Mounting Thread, M8x1, M10x1, G1⁄4 BSPP and G1⁄2 BSPP Mounting Threads Available
6 mm Diameter Standard, 50mm Minimum Length Available
Pt100 Class A Platinum RTD Standard, Pt1000 Platinum RTD Also Available (Resistance per IEC60751)
4 Wire Design Works with Any 2, 3 or 4-Wire Measurement System
Integral 4-Pin M12 Male Connector for Easy Connection
Bendable Probes (After the First 50 mm of Probe Tip) Using a Minimum Suggested Bend Radius of 2x the Probe Diameter
Vibration Tested to MIL-STD-202G, Method 204D, Test Condition A, 10gs from 10 to 500Hz (150mm long)

RTD (PT100) Probes, Elements and Assemblies - View related products

Description

Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation. A Partial List Of Our M12 Extension Cables is Included in the Ordering Table Below.

Omega's RTD sensors with M12 connections are designed to provide for easy and efficient installation or removal of these sensors for periodic calibration, troubleshooting or replacement. Gone are the days of having to pull extension cables from cable trays in order to calibrate or replace the sensor, now you simply disconnect the sensor from the extension cable saving cost and downtime. The Omega PR-26 RTD is a flexible and robust temperature sensor made with 316L Stainless Steel housings and sheaths for strength and corrosion resistance. The probe stem is made from mineral insulated cable which produces a sensor that can be used to 500°C, and can be bent (except for the first 50 mm of the tip) to fit your application.

These sensors include a 4-pin, M12 A-Coded plug connector for easy assembly to patch cables or extension cables. Unlike other M12 enabled sensors that have a maximum rating of 85 or 90°C on their connections, the PR-26 RTD can really take the heat with a connector rating of 250°C. Combine this sensor with one of our proprietary M12CM-T24SSPC high temperature extension cables and you have a probe/cable combination that is unmatched in the industry.

The mounting thread options on the PR-26 Series sensors allow them to be used in a wide variety of applications, including:

Stand alone immersion sensors.

Installed directly into your product or process using an existing metric threaded port.

When combined with our M12-Handle, non-threaded "A" style PR-26 probes can be used in hand-held sensing applications.

Other applications using a variety of available compression fittings or other accessories.

These RTD sensors can be used in any 2, 3 or 4-wire application by selecting one of the two available wiring arrangements (see the wiring diagrams below) and using only those wires needed for your measurement connection. This allows for simplified, trouble free installation with any existing application. This also allows the PR-26 series sensor to be used for a wide variety of replacement applications since it can be connected as-is with just about any measurement or control equipment available when combined with a 4-pin female M12 connector extension or patch cable.

Standard Mounting Threads: M10x1mm, M8x1mm, G1/4 BSPP, G1/2 BSPP and Non-Threaded

Standard Probe Diameters: 6mm and 3mm

Standard Probe Lengths: 150, 250 & 350mm (50mm minimum)

Sensor: Pt100 (100 Ohms at 0°C, .00385 TCR (alpha)) Standard, Pt1000 and Other Options Available

Accuracy: Class A Standard (per IEC 60751), Others Available Upon Request

Temperature Range: -50 to 500°C Except for the Connector Which is 250°C Max

Insulation Resistance: 100 Megohms Minimum at 100VDC at Room Ambient

Response Time: Approximately 8.5 Seconds (63.2% Response) When Immersed in Water Flowing at 3 feet/sec

Vibration Resistance: 10g's from 10 to 500Hz per MIL-STD-202G, Method 204D, Test Condition A (150mm long or shorter)

(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.

Qty

Description

PR-26A-3-100-A-M6-0150-M12-1

TWD6,220

Availability: 6 weeks

Element Pt100, Class A, Length mm 150, Mounting Thread None

PR-26A-3-100-A-M6-0250-M12-1

TWD6,340

Availability: 6 weeks

Element Pt100, Class A, Length mm 250, Mounting Thread None

PR-26A-3-100-A-M6-0350-M12-1

TWD6,740

Availability: 6 weeks

Element Pt100, Class A, Length mm 350, Mounting Thread None

PR-26E-3-100-A-M6-0150-M12-1

TWD6,100

Availability: 6 weeks

Element Pt100, Class A, Length mm 150, Mounting Thread M8x1

PR-26E-3-100-A-M6-0250-M12-1

TWD6,340

Availability: 6 weeks

Element Pt100, Class A, Length mm 250, Mounting Thread M8x1

PR-26E-3-100-A-M6-0350-M12-1

TWD6,610

Availability: 6 weeks

Element Pt100, Class A, Length mm 350, Mounting Thread M8x1

PR-26F-3-100-A-M6-0150-M12-1

TWD6,100

Availability: 6 weeks

Element Pt100, Class A, Length mm 150, Mounting Thread M10x1

PR-26F-3-100-A-M6-0250-M12-1

TWD6,340

Availability: 6 weeks

Element Pt100, Class A, Length mm 250, Mounting Thread M10x1

PR-26F-3-100-A-M6-0350-M12-1

TWD6,610

Availability: 6 weeks

Element Pt100, Class A, Length mm 350, Mounting Thread M10x1

PR-26G-3-100-A-M6-0150-M12-1

TWD6,100

Availability: 1 week

Element Pt100, Class A, Length mm 150, Mounting Thread G1⁄2 BSPP

Extension Cables

M12CM-T24SSPC-SF-5

TWD3,094

Availability: 1 week

5 Meter Long, LCP Overmolded Straight Connector with 4-Conductor FEP Cable (200°C Max)

M12CM-T24SSPC-RF-5

TWD2,929

Availability: 6 weeks

5 Meter Long, LCP Overmolded Right Angled Connector with 4-Conductor FEP Cable (200°C Max)

M12CM-T24SSPC-RF-10

TWD3,805

Availability: 6 weeks

10 Meter Long, LCP Overmolded Right Angled Connector with 4-Conductor FEP Cable (200°C Max)

M12C-PVC-4-S-F-5

TWD834

Availability: 1 week

5 Meter Long, PVC Overmolded Straight Female Extension Cable

M12C-PVC-4-R-F-5

TWD881

Availability: 1 week

5 Meter Long, PVC Overmolded Right Angle Female Extension Cable

M12C-PVC-4-R-F-10

TWD1,104

Availability: 1 week

10 Meter Long, PVC Overmolded Right Angle Female Extension Cable

M12C-PUR-4-S-F-2

TWD749

Availability: 4 weeks

2 Meter Long, PUR Overmolded Straight Female Extension Cable

M12C-PUR-4-S-F-5

TWD913

Availability: 1 week

5 Meter Long, PUR Overmolded Straight Female Extension Cable

M12C-PUR-4-S-F-10

TWD1,155

Availability: 4 weeks

10 Meter Long, PUR Overmolded Straight Female Extension Cable

Accessories

TX-M12-RTD-C

Consult Sales

Availability:

Miniature Programmable Temperature Transmitter (4 to 20mA) with M12 Connections (Wiring Option 2 Probes)

TX-M12-RTD-C-1

Consult Sales

Availability:

Miniature Programmable Temperature Transmitter (4 to 20mA) with M12 Connections (Wiring Option 1 Probes)

TX-M12-RTD-V

Consult Sales

Availability:

Miniature Programmable Temperature Transmitter (0 to 10VDC) with M12 Connections (Wiring Option 2 Probes)

TX-M12-RTD-V-1

Consult Sales

Availability:

Miniature Programmable Temperature Transmitter (0 to 10VDC) with M12 Connections (Wiring Option 1 Probes)

M12TX-Pt100

TWD4,568

Availability: 6 weeks

Over Molded Programmable Temperature Transmitter with 4 to 20mA output and M12 Connections (for use with wiring option 2 probes only)

SPRTX-SS1-M12-1

TWD7,440

Availability: 6 weeks

4-20 milliamp Transmitter in Mating M12 Connector with Extension Cable, Range -99 to 208°C (-146 to 406F°F) for use with -1 style RTDs

TX94A-3-SS-M12F-1

Consult Sales

Availability:

4-20mA Transmitter in SST Housing, Range -18 to 149°C (0 to 300°F) for use with -1 style RTD wiring

TX94A-4-SS-M12F-1

TWD10,370

Availability: 15 weeks

4-20mA Transmitter in SST Housing, Range -18 to 260°C (0 to 500°F) for use with -1 style RTD wiring

M12-HANDLE-A

TWD3,735

Availability: 4 weeks

Handle Accessory to Convert a PR-26A Probe Into a Hand-Held Probe.

† All prices on this site are shown in Taiwan Dollars.
Note: For 1000 O, Class A elements, change “100” to “1000” in model number, no additional price.
For lengths longer than 350mm, change “0350” in the model number to the required length in mm and add $1 per 25mm to the price. (example: 500mm = 0500, 425mm = 0425).
Ordering Example: (1) PR-26A-3-100-A-M6-0150-M12-1 Element Pt100, Class A, Length mm 150, Mounting Thread None, TWD6,220

	(1)		(2)		(3)		(4)		(5)		(6)
PR-26		-3-		-		-		-		-M12-

Option Descriptions:

(1) Mounting Thread select from:
A for None
E for M8x1
F for M10x1
G for G1/2 BSPP
H for G1/4 BSPP

(2) Element select from:
100 for Pt100
1000 for Pt1000

(3) Accuracy select from:
A for Class A
B for Class B

(4) Sheath Diameter select from:
M6 for 6mm Diameter
M3 for 3mm Diameter

(5) Length (Custom lengths available) select from:
0150 for 150 mm
0250 for 250 mm
0350 for 350 mm

(6) Wiring Options select from:
1 for Wiring Option 1
2 for Wiring Option 2

Note: All combinations may not be valid, check spec sheet for valid part numbers.