Sanitary - View related products
Sensor Includes a 4-Wire M12 Connector Plug for Attachment to Process Instrumentation. An M12 Extension Cable is Required for Installation.
Clean-In-Place Design for Use in Food, Dairy and Pharmaceutical Processes
Standard Mounting Cap is a 1½" 16AMP Tri-GripTM (Tri-Clamp® Compatible) Design, Other Cap Sizes and Styles are Available
Removable Probe Assembly is Spring Loaded Into the Thermowell for Good Thermal Response
Available with A Variety of Immersion Lengths.
Wetted Surfaces are 316L Stainless Steel, Surface Finish = 32 Microinch or Better
Process Measurement Temperature Range: -50 to 200°C (-58 to 392°F)
† All prices on this site are shown in Taiwan Dollars.
Note: For other cap sizes or styles, other immersion lengths, or for thermistor versions of this product, please contact Sales.
Ordering Example: (1) PRS-3-100-A-TW-0163-D1-M12 Removable 4-wire Pt100 RTD sensor (100 O at 0°C, Class A accuracy) spring loaded in a 1½, TWD7,705
Nominal Element Resistance select from:100
for 100 ohm @ 0 C (standard)1000
for 1 kohm @ 0 C
Accuracy select from:A
for Class A Accuracy
Insertion Length select from:0163
for 1-5/8" insertion (2-1/2" well stem length)0250
for 2-1/2" insertion (4" well stem length)0450
for 4-1/2" insertion (6" well stem length)0750
for 7-1/2" insertion (9" well stem length)1050
for 10-1/2" insertion (12" well stem length)
Note: All combinations may not be valid, check spec sheet for valid part numbers.