Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

Discontinued -  Diffused Semiconductor Pressure Transducer
Rugged Aerospace Design

PX6000-MV

Diffused Semiconductor Pressure Transducer | PX6000-MV

Diffused Semiconductor Pressure Transducer

See All Models Below

CE
  • High Reliability
  • Long Term Stability
  • All Stainless Steel Case
  • Vacuum Range Available
  • 5 Point NIST Calibration Certificate Included
Pressure Transducers - View related products

Description

OMEGA’s PX6000 Series pressure transducers fit easily into your application. These low-cost transducers are small and light, and mounting requires no bulky structures. You select from 3 electrical terminations and 6 pressure fittings. The sensor is a small [about 2.54 cm (0.1")] square silicon chip with 4 diffused strain gages, mounted in the stainless steel case. Laser-trimmed resistors provide temperature compensation and adjust zero balance and span. The 30 mV full range output is compatible with most amplifiers and data acquisition systems.

The PX6000 uses solid state media isolation for improved reliability. Thin films of chemically inert materials are deposited or grown on the chip surface to provide electrical isolation between the sensor and pressure medium. The sensor is less sensitive to vibration and more dependable in high-shock environments. Corrosion resistance is outstanding, and the isolation will remain effective because there is no gel or oil column to deteriorate.


The PX6000 is also available in metric configurations, with G1/4 or G1/8 ports, and models from 0-1 to 0-25 bar pressure ranges. Please see the PXM6000 for complete details, or contact our Pressure department for more information..

SPECIFICATIONS
ELECTRICAL
Excitation: 10 Vdc
Output: 3 mV/V ± 10%
Input Resistance: 2000 Ω minimum
Output Resistance: 1000 Ω minimum, 1500 Ω maximum
Zero Balance: 0 mV ±5% FSO
Dielectric Isolation Resistance: 100 MΩ minimum at 50 Vdc applied between the case or a conductive medium and the bridge circuit
Sensing Element: 4-active-arm bridge using a micro-machined diffused silicon diaphragm sensor, thin-film media and dielectric isolation barriers
Temperature Sensor: Output resistance @ 24°C (75°F) 900 to 1500 Ω
Temperature Coefficient: 8% min, 10% max per 55.5°C (100°F)

PERFORMANCE
Accuracy: Combined linearity, hysteresis and repeatability ≤±0.25% FS for all ranges

ENVIRONMENTAL
Operating Temp Range: -54 to 150°C (-65 to 300°F)
Compensated Temp Range: -54 to 121°C (-65 to 250°F)
Thermal Effects:
    Span: ≤±0.02% of FS/°F
    Zero: ≤±0.02% of FS/°F
Vibration Sensitivity: At 35g peak sinusoidal vibration from 10 Hz to 2000 Hz (½" D.A.), the output shall not exceed 0.04% FS/g for 15 psi range to 0.005% FS/g for 100 psi and above
Natural Frequency: Greater than 35 kHz for 100 psi and above
Shock: 100 g, 11 ms half sine wave without damage

PRESSURE
Proof Pressure: 2 times rated pressure will not cause changes in performance beyond the specified tolerances
Burst Pressure: 3 times rated pressure for pressure ranges below 200 psi, or 2.5 times rated pressure for pressure ranges above 200 psi will not cause rupture of the pressure sensor

MECHANICAL
Wetted Parts: 316 stainless steel, silicon nitride, Pyrex® glass, epoxy, Kovar®
Electrical Connection:
    Standard: PTIH-10-6P
    Optional: 0.6 m (2') cable or 4-pin solder terminal header
Pressure Port:
    Standard: MS33656-4 male
    Optional: MS33649-4 female, 1/4-18 or 1/8-27 NPT male or female
Weight: 4 oz max, excluding pressure fitting and electrical connection
Mating Connector: PTS06A-10-6S (not included)
(Specify Model Number)
Part Number/Desc.
Qty
Description
PX6000L1-30VACV
Consult Sales  
Availability: 
 
 
30-0 in-Hg transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-015AV
Consult Sales  
Availability: 
 
 
0-15 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-020AV
Consult Sales  
Availability: 
 
 
0-20 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-050AV
Consult Sales  
Availability: 
 
 
0-50 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-100AV
Consult Sales  
Availability: 
 
 
0-100 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-200AV
Consult Sales  
Availability: 
 
 
0-200 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-300AV
Consult Sales  
Availability: 
 
 
0-300 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-015GV
Consult Sales  
Availability: 
 
 
0-15 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-020GV
Consult Sales  
Availability: 
 
 
0-20 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-050GV
Consult Sales  
Availability: 
 
 
0-50 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male and millivolt output
PX6000L1-100GV
Consult Sales  
Availability: 
 
 
0-100 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-200GV
Consult Sales  
Availability: 
 
 
0-200 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male and millivolt output
PX6000L1-300GV
Consult Sales  
Availability: 
 
 
0-300 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male and millivolt output
PTS06A-10-6S
Consult Sales  
Availability: 
 
 
Mating connector (sold separately)
All prices on this site are shown in Taiwan Dollars.
Note: Metric Ranges Available - Consult Engineering
Ordering Example: (1) PTS06A10-6S mating connector (sold separately), TWD2,155 

Option Descriptions:


(1) Pressure Port select from:
L for MS33656-4 Male
M for MS33649-4 Female
A for 1/8-27 NPT Male
B for 1/8-27 NPT Female
C for 1/4-18 NPT Male
D for 1/4-18 NPT Female

(2) Electrical Connection select from:
1 for PT1H-10-6P Connector or equal (mating connector not included)
0 for 2' (6m) cable (std) +2$/ft over 2'
3 for 4-pin Eyelet Header (no charge)

(3) Range select from:
30 for 30 to 0 in-Hg (Vacuum only)
015 for 0-15 psi
020 for 0-20 psi
050 for 0-50 psi
100 for 0-100 psi
200 for 0-200 psi
300 for 0-300 psi

(4) Units select from:
VAC for Vacuum Model
G for Gage Model
A for Absolute Model

(5) Output select from:
V for mV/V Output
5T for 0 to 5 Vdc Output
I for 4 to 20mA Output

(6) Options select from:
for No Options
-CAL11 for 11 point NIST Calibration $250 adder
-xxFT for Extra length of cable $2/ft over 3ft
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.