PXM709GW Series
Submersible Pressure Transducers
See All Models Below
-
Precision Micromachined Silicon Sensor
-
5-Point NIST Traceable Calibration
-
Lightning/Surge Protection Available on Amplified Models
-
316L SS Case and Diaphragm
-
Fused Polyurethane Cable
-
mV/V, 0-10 Vdc, or 4-20 mA Output
-
Premium Temperature Performance
-
Broad Compensated Temperature Range
-
0.20% Standard Accuracy or Optional 0.08% High Accuracy Models for Precise Depth Measurement
-
Available in Gage Pressure: Vented to Atmosphere Through the Cable; Sealed Gage: Not Vented to Atmosphere; or Absolute Pressure: Vacuum Reference
-
Reverse Polarity Protected
-
Protective Nose Cone and Desiccant Available
-
Standard or Custom Cable Lengths
Pressure Transducers - View related products
† All prices on this site are shown in Taiwan Dollars.
Note: 1) Comes complete with 5-point NIST traceable calibration certificate.
2) To order with additional cable length, specify total length in meters, additional cost for length over 3 meters. i.e. PXM709GW-001BGI-12M (12 meter cable).
3) To order with optional 0.08% FS accuracy for extra cost, insert code “-HH” after “I”. I.E. PXM709GW-3.5BGI-HH.
4) To order with ½ NPT Conduit fitting for extra cost, specifiy Model PXM709C. i.e.PXM709CGW-170HGI.
5) To order with optional Lightning/Surge protection for extra cost, specify Model PXM709LGW, i.e. PXM709LGW-001BGI.
Ordering Example: (1) PXM709LGW-025HGI-HH is a 0-7 bar, 0.08% FS accuracy submersible trasnducer with lightning protection and standard 3 m (10 ft) cable, TWD39,075
Option Descriptions:
(1)
Termination select from:PXM709 for Waterproof Cable
PXM709C for Waterproof Cable and 1/2 NPT Conduit Fitting
(2)
Lighting/Surge Protection (Amplified Models only) select from:GW for no protection
LGW for Lightning/Surge Protection
(3)
Pressure Ranges select from:-025H for 20 mbar
-070H for 70 mbar
-170H for 170 mbar
-350H for 350mbar
-700H for 700 mbar
-001B for 1 bar
-002B for 2 bar
-3.5B for 3.5bar
-007B for 7 bar
-010B for 10 bar
-17.5B for 17.5 bar
-035B for 35 bar
-050B for 50 bar
-070B for 70 bar
(4)
Pressure Type select from:G for Gage Pressure available in all ranges
SG for Sealed Gage Pressure available from 7 to 70 bar
A for Absolute Pressure available from 350 mbar to 70 bar
(5)
Output select from:V for mV/V ratiometric output
5V for 0 to 5 Vdc output
10V for 0 to 10 Vdc output
I for 4 to 20 mA output
(6)
Accuracy Options (Standard Accuracy 0.2%) select from: for
-HH for High (0.08%) Accuracy
(7)
Optional Cable Length (standard length 3 m) select from: for
-4.5M for 4.5 m cable
-6M for 6 m cable
-7.5M for 7.5 m cable
-9M for 9 m cable
-12M for 12 m cable
-15M for 15 m cable
-18M for 18 m cable
-20M for 19.8 m cable
-22M for 22.5 m cable
-30M for 30 m cable
-45M for 45M cable
-91M for 91 m cable
Note: All combinations may not be valid, check spec sheet for valid part numbers.