Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

Smart Heat Flux Sensor

SP-016-Series

Smart Heat Flux Sensor with Digital I/O | Layer N
 | SP-016-Series

Smart Heat Flux Sensor with Digital I/O | Layer N

TWD6,005 SP-016-1

CE
  • 1x Heat Flux Thermopile including Thermocouple Temperature Compensation monitoring device
  • Standard 2x Digital I/O
  • Software configurable through SYNC configuration software
  • Modular M12 construction
  • OMEGA Smart Core enabled

    -Data Logging

    -Integrated Alarm and Control

    -Plug and Play Device Detection

    -Sensor health monitoring

IIoT & Wireless Systems - View related products

Description

The Layer N SP-016 Heat Flux Smart Probe provides an easy way to integrate your thermopile-based heat flux sensor to the Layer N Ecosystem. The SP-016 performs the necessary calculations to provide the heat flux measurement in W/m2. The SP-016 accepts heat flux sensors through its M12 4-pin connector and Layer N Smart Interfaces through its M12 8-pin connector. Omega offers an optional M12-S-M-FM connector to easily connect wire leads to your SP-016.


The SP-016 supports any single thermopile sensor input (mV/W/ m2) and temperature compensation input (thermocouple). Additionally, the SP-016-1 provides 2 open drain discrete inputs/outputs that may be used to detect external switch closures or control external alarms and control relays.


Intuitive Configuration

Easily configure your Layer N Smart Probe using SYNC’s intuitive configuration interface. Additionally, an integrated command line interface allows for quick serial setup of your Smart Probe and Smart Interface using standard terminal emulators.


Smart Interface Modularity

Customize your Layer N Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Layer N Cloud.


Smart Core Enabled

Layer N Smart Probes are integrated with an advanced suite of IIoT Smart Core features. These features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.


Your Data at a Glance with Layer N Cloud

Layer N Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.






Specifications


INPUT POWER

Voltage: 2.8 VDC - 3.3 VDC

DIO DIGITAL INPUTS

VinHighThreshold= 2.2 VMAX
VinLowThreshold= 0.3 VMIN
VinMAX= 30 VDC

DIO DIGITAL OUTPUTS

2x Open Drain 100 mA max
VMAX= 30 VDC

ENVIRONMENTAL

Operating Temperature: -40 to 85℃ (-40 to 185℉)
Rating: IP67 when mated

MECHANICAL

Dimensions: 22.1 mm W x 96.7 mm L (0.87” x 3.80”) not including mounting tabs

GENERAL

Agency Approvals: CE, EMC 2014/30/EU, LVD 2014/35/EU
Compatibility: Compatible with OEG, SYNC configuration software, Layer N Cloud, and Modbus Networks

HEAT FLUX SENSOR VALUES

Refer to the User’s Documentation of your heat flux sensor for Sensitivity, Gain, and Offset values.Values are configurable on SYNC configuration software.


Thermocouple Types

Type Range Accuracy
J -210℃ to 1200℃ 0.4℃
K -160℃ to 1372℃ 0.4℃
T -190℃ to 400℃ 0.4℃
E -200℃ to 1000℃ 0.4℃
N -100℃ to 1300℃ 0.4℃
R 40℃ to 1788℃ 0.5℃
S 100℃ to 1768℃ 0.5℃
B 640℃ to 1820℃ 0.5℃
C 0℃ to 2320℃ 0.4℃

M12 5-Pin Wiring

Pin TC TempCO
Pin 1 TC -
Pin 2 Thermopile +
Pin 3 Thermopile -
Pin 4 TC +

M12 8-Pin Wiring

Pin Name Function
Pin 1 DIO 0 Discrete I/O Signal 0
Pin 2 INTR Interrupt Signal
Pin 3 SCL I2C Clock Signal
Pin 4 SDA I2C Data Signal
Pin 5 Shield Shield Ground
Pin 6 DIO 1 Discrete I/O Signal 1
Pin 7 GND Power Ground
Pin 8 3.3VDD Power Supply


Layer N SP-016

The SP-016 comes with two discrete inputs/outputs. The discrete I/O can be used for a myriad of application including driving relays, physical alarms, or sensing dry contact like door switches. The probe can be configured to act as an edge controller, generating local alarm and control signals based on sensor inputs.


Model Number Description
SP-016-1 Temperature and RTD Smart Probe with discrete I/O

Layer N Smart Interface

Layer N Smart Probes require a Layer N Smart Interface to operate and connect to your Layer N Ecosystem. There are both wired and wireless options.


Model Number Description
IF-001 USB Smart Interface
IF-002 RS485/Modbus Smart Interface

Accessories

An optional M12 4-pin screw terminal adapter is available for users who wish to connect wire leads directly to the SP-016.


Model Number Description
HFS-5 Economical heat flux sensor
M12-S-M-FM M12 4-pin screw terminal adapter
M12.8-T-SPLIT Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins
M12.8-S-M-FM M12-8 pin Straight Plug Field install connector with screw terminals
DM12CAB-8-1-RA 1m (3.3’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-3-RA 3m (9.8’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-5-RA 5m (16.4’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-1 1m (3.3’) cable dual M12-8 straight connector
DM12CAB-8-3 3m (9.8’) cable dual M12-8 straight connector
DM12CAB-8-5 5m (16.4’) cable dual M12-8 straight connector
(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
  
SP-016-1
TWD6,005
Availability: 1 week
 
Smart Heat Flux Sensor with I/O
Layer N Smart Interfaces - Smart Probes must be connected to an interface to operate
  
IF-001
TWD2,294
Availability: 1 week
 
Wired Smart Probe interface with USB connection
  
IF-002
TWD4,715
Availability: 1 week
 
RS485/Modbus Smart Probe Interface with M12, 5 pin RS485 connection
Heat Flux sensors
  
HFS-5
TWD13,764
Availability: 1 week
 
Economical heat flux sensor
Accessories-M12 8 pin cables and connectors
  
M12.8-T-SPLIT
TWD1,345
Availability: 1 week
 
Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins
  
M12.8-S-M-FM
TWD765
Availability: 1 week
 
M12-8 pin Straight Plug Field install connector with screw terminals
  
DM12CAB-8-1-RA
TWD1,447
Availability: 1 week
 
1m (3.3’) cable dual M12-8 connector, right angle terminator
  
DM12CAB-8-3-RA
TWD1,801
Availability: 7 weeks
 
3m (9.8’) cable dual M12-8 connector, right angle terminator
  
DM12CAB-8-5-RA
TWD2,174
Availability: 1 week
 
5m (16.4’) cable dual M12-8 connector, right angle terminator
  
DM12CAB-8-1
TWD1,447
Availability: 7 weeks
 
1m (3.3’) cable dual M12-8 straight connector
  
DM12CAB-8-3
TWD1,801
Availability: 1 week
 
3m (9.8’) cable dual M12-8 straight connector
  
DM12CAB-8-5
TWD2,174
Availability: 7 weeks
 
5m (16.4’) cable dual M12-8 straight connector
Accessories-M12 4 pin connector
M12-S-M-FM
M12-S-M-FM
TWD619
Availability: 1 week
 
M12 4-pin screw terminal adapter
All prices on this site are shown in Taiwan Dollars.

Product Manuals:

Download QSG
Download Manual
Download QSG
We noticed you are from the US. Visit your local site for regional offers and live support.