Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

SSRL Series Pump-Up/Pump-Down Relays with Latching Capability  - Discontinued

SSRL Series

SSRL Series Pump-Up/Pump-Down Relays with Latching Capability | SSRL Series

See All Models Below

  • Switches 100 to 130 Vac and 200 to 250 Vac Loads
  • Ideal For Differential Level Control For Pump Up and Pump Down Applications
  • Latching Capability
  • High Reliability

Description

This product series is no longer available.


The SSRL series are latching 5 amp SPST Normally Open relays with a small output current to sense the closing of up to two dry mechanical relay contacts. They are ideal for differential level control for pump-up or pump-down applications when combined with any two level switches with dry relay contact closures, such as 2 LV-10 switches or 2 LV-230 switches, for example. The SSRL relays also convert non-latching mechanic relay outputs into latching alarm outputs, or allow low power reed relay switches to control high amperage or high voltage devices, such as pumps or motors. Latching operation is reset by making a momentary contact between the COM and OFF terminals. The SSRL holds its operational state for up to 1/2 second during momentary power loss to avoid nuisance shutdowns. A short between the COM and OFF terminals shuts the relay off, regardless of the switch status at the ON terminal.

SPECIFICATIONS
Load Size Voltage Loss: 2 Vac
Maximum Relay Closure Sense Current/Voltage: 20 mA @ 11 Vdc nominal
Minimum Load: 10 times the leakage current
Leakage Current Through Load Terminals: 2 mA at 120 Vac; 4 mA at 240 Vac
Housing Material: Polysulfone
(Specify Model Number)
Part Number/Desc.
Qty
Description
SSRL2
Consult Sales  
Availability: 
 
 
Switches 100 to 130 Vac loads, 50/60 Hz
SSRL3
Consult Sales  
Availability: 
 
 
Switches 200 to 250 Vac loads, 50/60 Hz
All prices on this site are shown in Taiwan Dollars.
Note: The SSRL Series Relays are not failsafe; we recommend a third level switch independent of the SSRL for alarm of overfill or overdrain conditions.
We noticed you are from the US. Visit your local site for regional offers and live support.