Thermistor Probes With M12 Connections
See All Models Below
Thermistor Elements, Probes and Assemblies - View related products
Maximum Continuous Use, 200°C (392°F)
[Short Term Use to 250°C (482°F)] for Sensing End,
85°C (185°F) Max at the Connector
Vibration Tested to ASTM-E1137: 3Gs from 5 to 500 Hz
Excellent Long Term Stability
Tolerance: ±0.2°C From 0 to 70°C (32 to 158°F)
Available in 2252, 3K, 5K and 10K Ω Resistances at 25°C (77°F)
† All prices on this site are shown in Taiwan Dollars.
Note: For lengths other than 6", change “-0600” in model number to required length and add $1 per inch greater than 6", (example: 9" = 0900, 41/2" = 0450).
For 1/8" probe diameters, change “-1/4” in model number to “-1/8”, no additional cost.
For 3K, 5K or 10K Ohm thermistor elements change “-2252” to desired resistance.
•For Dual element probes, add "-DUAL" to the end of the Model Number and multiply the price by 1.75
Ordering Example: (1) TH-21A-2252-1/4-0600-M12 Straight sheath, 1/4'' diameter, 6'' long, M12 male connector, TWD2,445
Design select from:A
for Plain no thread B
for 1/2 NPT mounting threadC
for 3/8 NPT Mounting threadD
for 1/4 NPT Mounting threadE
for M8x1 Mounting threadF
for M10x1 Mounting threadG
for G1/2 mounting threadH
for G1/4 mounting thread
Diameter select from:1/4
for 1/4 in diameterM6
for 6 mm diameter
Probe Length select from:0600
for 6 in0150
for 150 mm
Additional Option select from:Nothing(leave field blank)
for Dual element version
Note: All combinations may not be valid, check spec sheet for valid part numbers.