Screw Plug Immersion Heaters

TSP01632

^TWD6,030 TSP-01632

Stainless Steel, Brass or Steel Screw Plugs
Four Standard Screw Plug Sizes—25.4 mm (1"), 31.8 mm (11/4"), 50.8 mm (2"), 63.5 mm (21/2")
Recompacted Element Bends Restore Insulation Resistance after Forming
Thermowell for Optional Bulb and Capillary Thermostat, RTD or Thermocouple Probe
Corrosion-Resistant Electrical Wiring Hardware
Four Standard Sheath Materials—Copper, Steel, 316 Stainless Steel and Incoloy® 800
NEMA 1 Round Terminal Housing
Silicone Resin Element Seal Standard

Description

Screw plug immersion heaters consist of tubular elements welded or brazed into a threaded screw plug which can then be inserted into a threaded opening in a tank wall or through a mating full or half coupling. Need Customer Assistance? We take pride in our record of working with our customers to develop the right heater for the job. Call OMEGA with your requirements. OMEGA screw plug immersion heaters are UL recognized and CSA certified in many design variations. The UL file numbers are E90771 (CCN UBJY2/8) for heaters not containing a thermostat and E234452 (CNN KSXF2) for heaters used in water based solutions that include a thermostat. OMEGA’s equivalent CSA file number is 043099. If you require UL, CSA, or other NRTL agency approvals, please specify when ordering.

Model Number						Nominal Pipe Size	Immersed Length		KW	Approximate Net Weight
23 watts/in² (3.6 watts/cm²)—Typical Applications: Lightweight Oils, Degreasing Solutions and Heat Transfer Oils
120V-1Ph	120/240V	240V-1Ph	240V-3Ph	240/480V	480V-3Ph	Nominal Pipe Size	inch	mm	KW	lbs	kgs
TSP01632	—	TSP01633	—	—	—	1 NPT 1 element	6¹⁄₂	165	0.25	2	1
TSP01634	—	TSP01635	—	—	—		7⁷⁄₈	200	0.3	2	1
TSP01636	—	TSP01637	—	—	—		9¹⁄₄	235	0.35	2	1
TSP01638	—	TSP01639	—	—	—		9³⁄₈	238	0.5	2	1
TSP01640	—	TSP01641	—	—	—		13¹⁄₂	343	0.75	3	1
TSP01642	—	TSP01643	—	—	—		16³⁄₄	425	1	3	1
TSP01644	—	TSP01645	—	—	—		23³⁄₄	603	1.5	3	1
—	TSP01646	—	—	—	—	1¹⁄₄ NPT 2 elements	6³⁄₈	162	0.5	3	1
—	TSP01647	—	—	—	—		8⁷⁄₈	225	0.7	3	1
—	TSP01648	—	—	—	—		10¹⁄₁₆	256	0.75	4	2
—	TSP01649	—	—	—	—		12³⁄₄	324	1	4	2
—	TSP01650	—	—	—	—		19³⁄₈	492	1.5	4	2
—	TSP01651	—	—	—	—		25³⁄₈	645	2	5	2
—	TSP01652	—	—	—	—		36⁷⁄₈	937	3	5	2
—	TSP01653	—	—	TSP01654	—	2 NPT 2 elements	9¹⁄₂	241	1	5	2
—	TSP01655	—	—	TSP01656	—		13¹⁄₂	343	1.5	5	2
—	TSP01657	—	—	TSP01658	—		17¹⁄₂	445	2	6	3
—	TSP01659	—	—	TSP01660	—		20¹⁄₂	521	2.5	6	3
—	TSP01661	—	—	TSP01662	—		25	635	3	6	3
—	TSP01663	—	—	TSP01664	—		32¹⁄₂	826	4	7	3
—	TSP01665	—	—	TSP01666	—		40	1016	5	8	4
—	—	—	—	TSP01667	—		47¹⁄₂	1207	6	8	4
TSP01668	—	—	TSP01669	—	TSP01670*	2 NPT 3 elements	9¹⁄₂	241	1.5	5	2
TSP01671	—	—	TSP01672	—	TSP01673*		17¹⁄₂	445	3	6	3
TSP01674	—	—	TSP01675	—	TSP01676		22	559	3.75	7	3
TSP01677	—	—	TSP01678	—	TSP01679		25	635	4.5	7	3
—	—	—	TSP01680	—	TSP01681		32¹⁄₂	826	6	8	4
—	—	—	TSP01682	—	TSP01683		40	1016	7.5	9	4
—	—	—	TSP01684	—	TSP01685		47¹⁄₂	1207	9	10	5
—	—	—	TSP01686	—	TSP01687		64	1626	12.5	12	5
TSP01688	—	—	TSP01689	—	TSP01690*	2¹⁄₂ NPT 3 elements	17¹⁄₄	438	3	8	4
TSP01691	—	—	TSP01692	—	TSP01693		19¹⁄₁₆	484	3.75	8	4
TSP01694	—	—	TSP01695	—	TSP01696		24³⁄₄	629	4.5	9	4
—	—	—	TSP01697	—	TSP01698		32¹⁄₄	819	6	11	5
—	—	—	TSP01699	—	TSP01700		39³⁄₄	1010	7.5	12	5
—	—	—	TSP01701	—	TSP01702		47¹⁄₄	1200	9	13	6
—	—	—	TSP01703	—	TSP01704		63³⁄₄	1619	12.5	16	7
—	—	—	TSP01705	—	TSP01706		76¹⁄₄	1937	15	18	8
Note: Dual-voltage heaters are 1-phase and are wired for the higher voltage unless otherwise specified. * 3-phase only. Other 3-phase heaters are convertible to 1-phase.