† All prices on this site are shown in Taiwan Dollars.
Note: Comes complete with 24 Vdc power supply, 1.8 m (6') cable, 8 pin male mini DIN connector, operator’s manual and NIST certificate.
††Portable versions "-B" have an integral battery compartment and come complete with 24 Vdc power supply, 1.8m (6') cable, 8 pin male mini DIN connector, operator's manual, NIST certificate, and 9V battery installed. Portable version is not available on models with 4 to 20 mA output.
Units are calibrated to air @ 5 psig for 0 to 1 LPM, 15 psig for 2 to 10 LPM, 30 psig for 20 to 100 LPM, and 50 psig for 200 LPM and greater.
Calibrations done at ambient (25°C/77°F) temperature only.
To replace the standard RS232 communications with RS485, add suffix "-RS485" to the model number, add $120 to the price.
Standard output is scaled to the mass flow rate. For volumetric flow rate as standard output add "-VOL" to the model number.
Optional secondary output are scaled the same as the primary output. For a different secondary output scale add suffix "-T" for temperature or suffix "-P" for pressure, no additional cost.
Add "-SCFH" to model number for units scaled in SCFH, no additional charge. Specify required range in SCFH.
For totalizer option, add suffix "-TOT" to the model number, add $120 to the price. Please specify resolution. This is a 6-digit counter. Examples: For totalizing in liters with 1/100 liter resolution, the max count would be 9999.99. For totalizing in liters with 1 liter resolution, the max count would be 999999.
High accuracy calibrations to ±0.5% of full scale are available on models having a minimum full scale range of 10 SCCM or greater. For a high accuracy calibration add suffix "-HACAL" to the model number, add $400 to the price.
For a Remote Display, add suffix "-RD-*FT" to the model number, add $210 to the price. Replace the * in the suffix with the required length in whole feet, the maximum length is 3.6576 m (12'). Please note the optimum distance in feet is between 2.7 to 3 m (9 to 10').
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Ethernet/IP, DeviceNet, Modbus and Profibus communications are also available for an additional charge.
Ordering Example: (1) FMA1613A Mass Flowmeter, 3/4, TWD94,810
Max Flow select from:01
for 0.5 SCCM02
for 1 SCCM14
for 2 SCCM15
for 5 SCCM03
for 10 SCCM16
for 20 SCCM04
for 50 SCCM17
for 100 SCCM18
for 200 SCCM19
for 500 SCCM20
for 1 SLM05
for 2 SLM06
for 5 SLM07
for 10 SLM08
for 20 SLM09
for 50 SLM10
for 100 SLM11
for 250 SLM12
for 500 SLM13
for 1000 SLM21
for 1500 SLM22
for 2000 SLM23
for 3000 SLM
Output select from:Nothing(leave field blank)
for 4 to 20 mA output-I2
for Two 4 to 20 mA outputs-V2
for Two 0 to 5V Outputs-I2-T
for Two 4 to 20 mA outputs second output for temperature-V2-T
for Two 0 to 5V outputs second output for temperature-I2-P
for Two 4 to 20 mA outputs second output for pressure-V2-P
for Two 0 to 5V outputs second output for pressure-VOL
for Volumetric flow rate as standard output
Portable Version select from:Nothing(leave field blank)
for Standard -B
for Portable version of the meter (not available on models with 4 to 20 mA output)
Input select from:Nothing(leave field blank)
for 0 to 5V-IN
for 4 to 20 mA input
RS485 select from:Nothing(leave field blank)
SCFH select from:Nothing(leave field blank)
for Units scaled in SCFH
Totalizer select from:Nothing(leave field blank)
Note: All combinations may not be valid, check spec sheet for valid part numbers.