|
|
|
|
|
The FE cable heating element is tension wrapped and covered with a fluorocarbon film and
enclosed in a minimum 20 mil FEP abrasion resistant extruded jacket. This tough outer
cover provides moisture and dielectric protection as well as resistance to abrasion.
A tinned copper overbraid provides additional protection and electrical ground return path.
APPLICATIONS
OMEGALUX™ FE cable is a low Watt density electrical resistance heater. It is designed for freeze
protection and midrange process temperature control and maintenance applications in lines
periodically purged with 150 PSIG steam.
Model No. |
Watts/ft. |
Volts |
Module# Length (ft)1 |
Max** Length (ft) |
FE3-120B | 3 | 120 | 2 | 360 |
FE3-240B | 3 | 240 | 4 | 720 |
FE5-120B | 5 | 120 | 2 | 275 |
FE5-240B | 5 | 240 | 3 | 550 |
FE8-120B | 8 | 120 | 2 | 220 |
FE8-208B | 8 | 208 | 4 | 381 |
FE8-240B | 8 | 240 | 4 | 440 |
FE8-277B | 8 | 277 | 4 | 508 |
FE8-480B | 8 | 480 | 6 | 880 |
FE12-120B | 12 | 120 | 2 | 180 |
FE12-208B | 12 | 208 | 4 | 312 |
FE12-240B | 12 | 240 | 2 | 360 |
FE12-277B | 12 | 277 | 4 | 416 |
# Cable circuit module length in feet. When ordering please allow a minimum of 1 module
length extra for terminations.
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be
used. Lengths are based on cable operating temperatures of 300°F.
To complete your system the following accessories are recommended: (1) Termination kits for
FE cable (see page B-31 for specifications), (2) Control options - see Section P for complete
selection of controllers thermostats.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in Singapore currency.
Note: Price per foot. When ordering specify desired length in feet. 25 foot minimum.
|
|
|
|
|
|
|
|
Back to top
|