OMEGA's precision platinum pt100 RTD temperature probes are now available in 1/16" and 1.5 mm diameters for faster response times.
Note: Because of their smaller physical size, these temperature sensors are more fragile and should be handled with greater care than our larger diameter versions of the same probes. Avoid subjecting probes to bending, flexing or vibration.
PR-11
PR-13
PR-16
PR-17
† All dollar amounts on this site are shown in Singapore currency.
Note: Standard: Specify sheath length. Minimum sheath length for any style probe is 4". 1/16" dia RTD probes cannot be bent. For intermediate lengths, use next longer probe price. Over 24", consult Custom Engineering. Actual diameter of sheath is 0.064" ± 0.003".
Metric: Minimum sheath length for any style probe is 100 mm. 1.5 mm dia RTD probes cannot be bent. For intermediate lengths, use next longer probe price. Over 600 mm, consult Custom Engineering. Actual diameter of sheath is 1.5 mm ± 0.075 mm.
All: Available in lead type 2 (3-wire) and lead type 1 (2-wire); please see page C-13. Please contact Custom Engineering for 4-wire, type 3. Consult Sales Department for lead wire with stainless steel overbraid. To order additional lead length on the PR-11 style probes, consult Sales Department.
Select 11 for Transition Junction Probe 16 for Utility Handle Probe 13 for Quick Disconnect Probe - STD Connector 17 for Quick Disconnect Probe - Miniature Connector
(2)
Sheath Diameter
Select 1/16 for 1/16 Inch M15 for 1.5 mm
(3)
Sheath Length
Select 6 for 6 Inch Sheath - 1/16 Diameter Only 12 for 12 Inch Sheath - 1/16 Diameter Only 18 for 18 Inch Sheath - 1/16 Diameter Only 24 for 24 Inch Sheath - 1/16 Diameter Only 150 for 150 mm Sheath - 1.5 mm Diameter Only 300 for 300 mm Sheath - 1.5 mm Diameter Only 450 for 450 mm Sheath - 1.5 mm Diameter Only 600 for 600 mm Sheath - 1.5 mm Diameter Only
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.