The FSV10 Series electronic
proportioning solenoid valves can
control the flow of a wide variety of
gases and liquids. The variablestroke
electromagnetic valve is
pulsed by the driver electronics,
maintaining the correct magnetic
flux level in the solenoid and holding
flow at the level of the analog input
setpoint signal. A TTL-level input
allows the valve to be shut off
regardless of analog setpoint signal.
The output power level of the driver
electronics is jumper selectable for
cooler, more efficient operation. The
FSV10 Series requires 12 to 30 Vdc,
supplied by the optional FSV-PW
110 Vac plug-in power supply or via
the 9-pin D connector (included).
These valves come with 8 inches of
wire, which must be soldered to the
9-pin D connector.
SPECIFICATIONS Turndown Ratio: 100:1 Response Time: 500 msec max Fluid Temperature Range: -10 to 54°C (14 to 130°F) Typical Valve Surface Temperature: 54°C (130°F) with 24 Vdc power input Required Power Input (Not Included): 12 to 30 Vdc, 1 A @ 12 Vdc; 0.5 A @ 24 Vdc via 9-pin D connector or DC power jack Connection: ¼" compression fittings Setpoint Input Signal: 0 to 5 Vdc or 4 to 20 mA Valve Dimensions: 87.6 H x 87.6 L x 25.4 mm W (3.45 x 3.25 x 1.00") including compression fittings Driver Electronics: 7.62 W x 7.62 D x 25.4 mm H (3 x 3 x 1") Materials in Fluid Contact: 316 and 416 SS, FKM O-rings Maximum Pressure: 500 psig (3448 kPa) Maximum Differential Pressure: 50 psid (345 kPa); 35 psid (241 kPa) for FSV15 Leak Integrity: 1 x 10-9 sccs; helium, individually tested Ambient Temperature: 0 to 50°C (32 to 122°F) CE Compliance: EMC Directive 89/336/EEC EN55011:1991; Group 1, Class A EN50082-2:1995
† All dollar amounts on this site are shown in Singapore currency.
Note: Comes complete with operator’s manual, driver module and 9-pin D connector.
*Based on 10 psig (690 mbar) differential pressure.
For Oxygen Cleaning add suffix, "-O2" to the model number; add $125 to price.
Ordering Example: (1) FSV11 Proportioning solenoid valve with valve driver module, 20 cm (8'') wires on the valve and a mating 9-pin D connector, $1,290.00